How to adjust the clock on Wuling Hongguang S3?

1 Answers
NorahDella
07/30/25 9:30am
Wuling Hongguang S3 clock adjustment steps are as follows: 1. Press the two small dots below the clock, the left one adjusts the minute hand counterclockwise, and the right one adjusts the minute hand clockwise. 2. When the vehicle is started, there are two round buttons on the center console. Press the round button to turn it on. 3. The round button near the driver's seat is the power switch + volume switch. Press and hold H to adjust the hour, press and hold M to adjust the minute. When you see the numbers flashing, press the +/- keys to set the time. More information about Wuling Hongguang S3 is as follows: 1. In terms of appearance, the new Wuling Hongguang S3 retains the main design of the current model, with adjustments only made to the front and rear light clusters. The new car's front grille design is highly recognizable, and the more angular front light clusters add to its imposing presence. 2. For the interior, the new Wuling Hongguang S3 features a black and brown color scheme, which adds a certain level of sophistication.
Was this review help?
18
2
Share
More Forum Discussions

How to Activate One-Touch Window Lift for Volkswagen?

Method to activate one-touch window lift for Volkswagen: 1. Press the vehicle's one-touch start button to power on the vehicle; 2. Continuously pull the one-touch window lift button on the left door armrest; 3. While holding the window lift button, press the button on the left multifunction steering wheel; 4. Press the SET button on the right multifunction steering wheel to complete the setup of the one-touch window lift function. Taking the 2020 Volkswagen Teramont as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 5039mm, width 1989mm, height 1773mm, wheelbase 2980mm, fuel tank capacity 70l, and curb weight 2005kg. The 2020 Volkswagen Teramont features a front suspension of MacPherson independent suspension and a rear suspension of multi-link independent suspension, equipped with a 2.0l turbocharged engine, delivering maximum horsepower of 186ps, maximum power of 137kw, and maximum torque of 320nm.
9
2
Share

Is it necessary to display the insurance decal on the vehicle?

It is mandatory to display the insurance decal on the vehicle. Below are specific details about the insurance decal: Placement location: After purchasing compulsory insurance for the vehicle, the insurance decal must be immediately affixed to the right side of the front windshield. Penalty mechanism: If a motor vehicle driven on the road does not display the insurance decal, the traffic management department of the public security organ shall detain the vehicle and notify the owner to provide the insurance decal or complete the relevant procedures. A warning or fine may be imposed. Handling lost decals: If the vehicle's insurance decal is lost, the owner needs to visit the insurance company to apply for a replacement. Bring the vehicle's registration certificate and compulsory insurance policy. After obtaining the replacement, affix it directly to the right side of the windshield.
10
3
Share

What are the consequences of not licensing a vehicle?

It may result in the vehicle being impounded by the traffic management department of the public security authorities, with a warning or fine imposed. Below are precautions for licensing a new vehicle: 1. Although imported vehicles and some domestic cars, small and mini passenger vehicles have been included in the exemption from inspection, the range of exempt domestic car models is relatively limited. After the implementation of the new policy, all domestic cars can be exempt from inspection. The exemption applies to cars and small, mini passenger vehicles and two-wheeled motorcycles marked with "new vehicle exempt from inspection." 2. Exempt models do not include: off-road vehicles, small and mini ordinary passenger vehicles, and heavy or medium-sized trucks. 3. Exemption from inspection does not mean direct licensing. Currently, it only eliminates some inspection items. Before licensing, new vehicles must still undergo appearance inspection, photographing, and number stamping at the inspection site. Additionally, exhaust emission tests required for environmental protection purposes must still be conducted.
18
1
Share

What is the method to reset the MINI brake pad warning light?

MINI brake pad warning light reset method is: 1. Insert the remote key without pressing the brake pedal; 2. Press the start/stop engine button once to illuminate all dashboard lights; 3. Hold the reset button on the upper left of the dashboard for approximately 8 seconds. The brake pad replacement procedure is: 1. Open the engine compartment to check brake fluid level height to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the brake caliper bolts and take out the old brake pads; 4. Install new brake pads and tighten the guide bolts to complete replacement. Types of brake pads include: semi-metallic brake pads, non-asbestos organic (NAO) brake pads, carbon fiber brake pads, and ceramic fiber brake pads. The working principle of brake pads is: utilizing friction between the brake pads and brake drum, as well as between tires and road surface, to convert the vehicle's kinetic energy into thermal energy through friction, thereby stopping the vehicle.
10
4
Share

What is the difference between 28t and 2.0t?

There is no difference between 28t and 2.0t. The function of the engine is to convert the thermal energy of gasoline into mechanical energy by burning and expanding the gas in a sealed cylinder to push the piston to do work. Engine maintenance methods: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the scale in the water tank; 4. Regularly remove carbon deposits from the car; 5. Replace the car's air filter, oil filter, and fuel filter on time. Engine types include: 1. According to the fuel used, they are divided into gasoline engines and diesel engines; 2. According to the stroke, they are divided into four-stroke internal combustion engines and two-stroke internal combustion engines; 3. According to the cooling method, they are divided into water-cooled engines and air-cooled engines; 4. According to the cylinder, they are divided into single-cylinder engines and double-cylinder engines; 5. According to the intake system, they are divided into naturally aspirated engines, turbocharged engines, and supercharged engines.
2
2
Share

What Causes the Sour Smell When Turning on the Air Conditioning in a BMW?

The sour smell when turning on the air conditioning in a BMW is caused by a dirty air conditioning filter that has been used for too long. The functions of the air conditioning system are: 1. To cool, heat, ventilate, and purify the air inside the car; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety. Taking the 2021 BMW 5 Series as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5106mm, width 1868mm, height 1500mm, wheelbase 3105mm, fuel tank capacity 68l, and curb weight 1705kg. The 2021 BMW 5 Series features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0l turbocharged engine, delivering a maximum horsepower of 184ps, maximum power of 135kw, maximum torque of 290nm, paired with an 8-speed automatic transmission.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.