How to adjust the clock on the Tiggo 3?

1 Answers
Gayle
07/29/25 5:58pm
First, turn off the ignition switch and set the headlight switch to the first gear position. Then press and hold the adjustment button until the hour field flashes, then release it. Adjust the clock by pressing the adjustment lever. After setting the hour, do not move it; it will automatically switch to the minute field flashing. Then adjust the minutes by pressing the adjustment lever. Once everything is set, release the button. Below is some related information about the Chery Tiggo 3: 1. Certain adjustments have been made to the safety features. The ESP electronic stability system, EBA brake assist control system, and TCS traction control system, which were standard on older models, are no longer standard on the 1.6L manual comfort model and the 1.6L CVT comfort model. 2. In terms of power, the 1.6L naturally aspirated engine (model SQRE4G16) used in the current model will continue to be adopted, with a maximum output power of 93kW (126PS) and a peak torque of 160N·m. The transmission system is matched with a 5-speed manual and CVT gearbox.
Was this review help?
19
5
Share
More Forum Discussions

Which Tesla Model Features Butterfly Doors for the Rear Doors?

Tesla's butterfly doors are featured on the Model-S. Currently, there are two variants of the Model-S available for sale, equipped with a pure electric powertrain as the sole engine option and a single-speed transmission. The vehicle's dimensions are 4970mm in length, 1964mm in width, and 1445mm in height. Below is a brief introduction to the Model-S: (1) In terms of range, the new Model-S is equipped with an all-new electric drive system, incorporating a permanent magnet synchronous motor, silicon carbide electronic components, and improvements in the system's lubrication, cooling, bearings, and wheel design. These enhancements have increased the vehicle's overall energy efficiency to over 93%, directly resulting in a significant improvement in range without any increase in battery capacity. (2) The Model-S is compatible with Tesla's third-generation Supercharger, enabling charging speeds of up to 200kW.
7
4
Share

How long does it usually take to wait for a car in transit as mentioned by 4S stores?

4S stores generally say that a car in transit requires a waiting period of half a month to a month before it can be picked up. Typically, car models with better sales have longer waiting times, and the duration may vary depending on the model and color of the car. The specific time needs to be consulted with the staff at the 4S store. Precautions when buying a car at a 4S store: 1. Be wary of various discounts: Everyone hopes for bigger discounts when buying a car. If the salesperson really meets your requirements and the car price is much lower than originally imagined, you should be extra cautious because 4S stores cannot operate at a loss and will definitely seek more profit in other aspects. 2. Pay attention to contract details: When buying a car, once it involves signing contracts, pay close attention to the details. Never sign anything without reading, or sign contracts without looking at them. Doing so does not protect your interests and may even lead to significant losses later.
14
3
Share

What are the Five Major Assemblies of a Car?

The "five major assemblies" of a car refer to the engine, steering wheel, transmission, front and rear axles, and chassis. Specific details are as follows: Prohibition of Assembly: It is prohibited for any organization or individual to use the "five major assemblies" of scrapped cars or other spare parts to assemble cars. Prohibition of Trading: It is prohibited for scrapped whole cars, "five major assemblies," and assembled cars to enter the market for trading or to be traded in any other way. Prohibition on the Road: It is prohibited for assembled cars and scrapped cars to be driven on the road. Additional Information: Recycling: Dismantling enterprises are only allowed to sell the "five major assemblies" to qualified remanufacturing enterprises. The department in charge of recycling and dismantling under the State Council shall establish a recycling information system. Dismantling enterprises shall truthfully record various information such as the quantity, model, and flow direction of the "five major assemblies" and other main components and upload it to the recycling information system. Relevant departments will formulate supporting regulations to further specify the sales of the "five major assemblies," adding an additional institutional barrier to ensure safety.
17
0
Share

Why is the fuel consumption of the Ford Kuga so high?

Check if the load has increased, inspect tire pressure, and verify if the water temperature is too low or if the engine warms up slowly. Ensure all sensor signals are normal, including the water temperature sensor and speed sensor. Additionally, check the spark plugs and high-voltage wires for issues that may cause abnormal ignition circuits. These problems can be resolved by repairing or replacing parts to address the high fuel consumption. Below is an introduction to the Ford Kuga: 1. Launch Date: The Ford Kuga is an SUV under the Ford brand. On April 22, 2012, the all-new Ford Kuga made its Asian debut at the 2012 Beijing International Auto Show. Dubbed by Ford as the "smarter SUV," it features a luxurious and stylish exterior, a highly modern interior, and numerous leading high-tech configurations in its class. 2. Exterior: The Platinum Edition features a magnetic gray paint finish on the front grille, wheels, and front and rear bumpers. The Luxury Edition builds on this with a new mesh grille and chrome border trim. The Vignale Edition further enhances the appearance with the Vignale exterior package.
18
5
Share

Can the Geely Vision X6 dash cam monitor while parked?

Geely Vision X6 dash cam cannot monitor while parked. Here are the reasons: The parking monitoring function of dash cams is divided into two types, one is full-time recording, and the other is short-time recording that only starts when the vehicle vibrates. Even if the dash cam has a parking monitoring function, it can continue recording after the vehicle is turned off, but the recording time is not long, as the dash cam is not charging after the vehicle is turned off. Here are the functions of dash cams: (1) Protect the legitimate rights and interests of drivers. In the event of a traffic accident, the other party may extort money. With a dash cam, it can provide more intuitive evidence to better protect the interests of the car owner and avoid unnecessary losses. (2) In the event of a rear-end collision or some complex traffic accidents, the playback function of the dash cam can replay the entire accident process, making the responsibility clear at a glance. It can also simplify the handling process by traffic police and quickly clear the road.
10
1
Share

What is a PCV valve in a car?

PCV is the abbreviation for Positive-Crankcase-Ventilation, which means the active ventilation control system for the crankcase (or oil pan). The PCV valve consists of a valve body, valve, valve cover, and spring, and cannot be disassembled. The main functions are as follows: It directs gases from the crankcase into the intake manifold through the PCV valve, with a small amount of air entering the intake manifold directly from the air filter via the PCV valve. This prevents issues such as throttle icing, incomplete combustion, and worsened emissions. It also prevents exhaust gases from entering the atmosphere and keeps the engine oil from deteriorating. The PCV valve is a metering control valve installed between the engine crankcase ventilation system and the intake system. It is controlled by vacuum to regulate the flow of oil fumes from the crankcase ventilation system into the intake system. The flow rate is higher at high engine speeds than at low speeds. Additionally, when an engine backfire occurs, the PCV valve should cut off ventilation to prevent crankcase explosions.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.