How to Adjust the Clock on Highlander's Center Console?
3 Answers
Method to adjust the clock on Highlander's center console: 1. Press and hold the DISP button on the right side of the steering wheel until the multifunction display on the instrument panel shows the CLOCK option; 2. Press and hold the DISP button until the time display starts flashing, then press the DISP button again to adjust. The Highlander is a mid-size SUV under GAC Toyota, with exterior dimensions of 4890mm in length, 1925mm in width, and 1715mm in height, and a wheelbase of 2790mm. It is equipped with a 2.0T turbocharged engine, paired with a 6-speed automatic transmission, delivering a maximum horsepower of 220 and a maximum power output of 162 kW, with the maximum power achieved between 5200 to 5600 rpm.
I've adjusted the center console clock on the Highlander many times before, and it's quite straightforward. First, you need to sit in the car, start the engine, and make sure it doesn't stall. Then, locate the small gear icon on the center console screen and open the settings menu. Scroll down to find the time or date option, select manual setup, and the screen will display the current time. Use the buttons on the steering wheel or directly tap the numbers on the touchscreen to adjust the hours and minutes. Press confirm once you're done to save the settings. Just a heads-up: if the car battery has been replaced or disconnected, the time will reset to zero, and you'll need to set it again. Also, an incorrect time at night can mess up your navigation, so checking the clock system during annual maintenance is a good habit. Avoid pressing random buttons to prevent other settings menus from popping up and interfering with the process. Overall, it's not difficult—just practice a few times, and you'll get the hang of it.
From a beginner's perspective, let me explain the process of adjusting the central control time. When I first bought the car, I didn't understand it either. Basically, after turning on the system, you tap the settings entry on the central control main screen, where there's a clock option. Click into it, and you can manually adjust the time digits. It's quite convenient to use the knob to rotate a few times or lightly tap the screen with your finger to change the numbers. I recommend finding an open space to park and focus on the operation when adjusting the time—safety first. Also, setting the time accurately is crucial for clocking in at work, so don't let it cause any delays. If you accidentally exit to the main menu, don't worry, just re-enter the settings. It's really simple, don't overcomplicate it. Get familiar with the car's interface in your daily use to minimize distractions while driving. Remember to save after adjusting and confirm the display is correct before turning off the car.
