How to Adjust the Clock on a Peugeot 508?

1 Answers
MacJocelyn
07/29/25 6:01pm
To adjust the clock on a Peugeot 508, press the setup button on the center console, then select display settings and proceed to adjust the clock. Taking the 2021 Peugeot 508 as an example, it is a mid-size sedan with the following dimensions: length 4870mm, width 1855mm, height 1455mm, wheelbase 2848mm, and a curb weight of 1490kg. The 2021 Peugeot 508 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is powered by a 1.6L turbocharged engine, delivering a maximum horsepower of 170PS, maximum power of 125kW, and maximum torque of 250Nm, paired with a 6-speed automatic transmission.
Was this review help?
6
0
Share
More Forum Discussions

How to Judge the Distance of the Car Front When Driving?

Methods to judge the distance of the car front when driving: If there is a car ahead, when you see the front of your vehicle approaching the lower edge of the front car's bumper in the driver's compartment, it means the front of your car is about two meters away from the front car; if you see the upper edge of the front car's bumper, it means the front of your car is 0.5 meters away from the front car. If the vehicle you are driving is an SUV, the same two reference points apply. Seeing the lower edge of the bumper from the driver's compartment indicates the front of the car is 1.2 meters away from the front car, while seeing the upper edge means the front of the car is 0.3 meters away. To judge the distance of the wheels, if the driver sees the road surface coincide with the protruding point of the right wiper blade inside the car, it means the tire is pressing the line.
2
0
Share

How to Deactivate the Car Anti-Theft Function?

Methods to deactivate the car anti-theft function: First, locate the wiring distribution of the anti-theft system, which is usually found under the steering wheel and behind the panels below the A-pillar. Then, simply unplug the input wire of the anti-theft device, rendering it ineffective. Some anti-theft devices are protected by fuses; in such cases, locate the corresponding fuse and remove it to deactivate the car's anti-theft system. The car's electronic anti-theft alarm system adds electronic identification to the vehicle to prevent theft. After the owner remotely locks the doors, the alarm enters a guarded state. If someone attempts to pry open the door or use a key to open it, the anti-theft device will immediately sound an alarm. If the doors are not properly closed before driving, the warning light will flash continuously for several seconds. After turning off the engine and remotely locking the doors, if any door remains unclosed, the car lights will keep flashing and the horn will sound until the door is properly closed.
17
3
Share

Where is the Ford diagnostic port located?

Under the instrument panel cover below the buttons on the front left side of the driver's seat, there is a connector inside which serves as the diagnostic port. The vehicle diagnostic system is an extended detection system designed for automotive fault diagnosis. Here are some relevant introductions: 1. Standardization: To standardize the diagnosis of emission-related and drivability faults, starting from 1996, all new vehicles sold in China must have similar diagnostic instruments, fault codes, and repair procedures that comply with regulatory requirements. 2. Internationalization: With increasing economic globalization and automotive internationalization, the OBD system, as the foundation for drivability and emission diagnosis, will be implemented and applied more widely. The OBD program simplifies and unifies automotive fault diagnosis, eliminating the need for technicians to learn each manufacturer's new system separately. The OBD system continuously monitors whether the vehicle's emissions exceed standards during engine operation and will issue an immediate warning if they do.
9
3
Share

What version is the Land Rover Fire Cloud?

2012 Land Rover Range Rover 5.0T version. The relevant introduction of Land Rover Range Rover is as follows: Model: The Land Rover Range Rover is the flagship model of Land Rover. The Range Rover is a luxury all-terrain SUV. The new Range Rover's 3.0-liter engine is a twin-charged engine, which means it has both turbocharging and supercharging. This type of engine can use different charging methods under different working conditions, thereby improving engine efficiency, increasing power, and reducing turbo lag. Power: The new Range Rover uses three engines in total: a low-power 3.0-liter twin-charged engine, a high-power 3.0-liter twin-charged engine, and a 5.0-liter V8 supercharged engine. The model equipped with the 5.0-liter V8 supercharged engine is the top-tier model. This vehicle not only has strong off-road performance but also excellent on-road performance. All three engines are paired with an 8AT transmission, which provides smooth gear shifting.
8
5
Share

What are the symptoms of a faulty BMW electric water pump?

BMW's electric water pump failure can directly lead to engine overheating, even failure to start, and a warning light will appear on the dashboard. Many BMW models use electric water pumps, which do not rely on the engine to drive them. Instead, the electric water pump is directly driven by an electric motor, so it does not consume engine power. Below are the specific symptoms of a faulty electric water pump: 1. High water temperature: The car's cooling circulation capacity weakens or even stops, leading to high water temperature, especially noticeable in southern summers. 2. Water pump leakage: Coolant leaks near the water pump area. Leaking coolant leaves traces of coolant color on the water pump's ventilation holes, resulting in symptoms like high water temperature due to insufficient coolant. 3. Abnormal noise from the water pump: The water pump produces unusual noises when the engine is running, which may be subtle and difficult to detect.
20
0
Share

Where is the rearview mirror heating for BYD Qin Plus DMI?

In addition to the folding function, the BYD Qin Plus DMI rearview mirrors also feature electric adjustment for mirror angles and a heating function. The exterior rearview mirror heating button is located in the air conditioning system interface on the central control screen. Here are the relevant details: 1. Rearview mirror heating on the air conditioning control panel: Press the rearview mirror heating button on the air conditioning control panel to activate the exterior rearview mirror heating. The exterior rearview mirror heating will automatically turn off after approximately 12 minutes. 2. Location: The rearview mirrors are located on the exterior front of the vehicle and in front of the passenger compartment. They reflect the situation behind and to the sides of the vehicle, thereby expanding the driver's field of vision. Rearview mirrors are important safety components, and proper usage methods along with reasonable mirror angle adjustments can enhance the driver's safety and comfort.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.