How to adjust the clock in Wuling Hongguang?
2 Answers
Wuling Hongguang clock adjustment method: 1. First, press and hold the clock button until you hear a beep, then release the button. The time display will start flashing; 2. To set the hour, press and hold the preset button (H side) until the hour reading increments to the desired time; 3. To set the minutes, press the M side, following the same principle as setting the hour; 4. Finally, press the clock button to confirm the set time. Here is some relevant information about Wuling Hongguang: 1. Wuling Hongguang is equipped with two engines, PTEC1.2L and PTEC1.4L, designed and manufactured according to General Motors' global powertrain standards; 2. It adopts DOHC double overhead camshaft four-valve per cylinder design technology, with the 1.4L engine capable of delivering 75 kW power and 131 N·m maximum torque.
Adjusting the time on the Wuling Hongguang is actually quite simple. I remember figuring it out the first time I drove this car because the clock was always a few minutes slow. Here's how to do it: First, park the car and turn off the engine to ensure safety and avoid distractions. Then, look at the dashboard—there's usually a small knob or button on the left side. Press and hold it for a few seconds, and you'll see the time digits start flashing. Next, turn the knob to adjust the hours, then press the button again to switch to adjusting the minutes, and similarly turn the knob to set them. After adjusting, wait about 5 seconds for it to save automatically. The process is similar for both older and newer models of the Wuling Hongguang, but pre-2010 models may use the knob directly, while post-2015 models might require setting it through the radio menu—same logic applies. Oh, and if the time is inaccurate, it could be due to a weak battery or damp weather affecting the contacts. It's a good idea to check the battery or service the connectors. Calibrating the time during each oil change can save you a lot of hassle.
