How to Adjust the Clock in the 7th Generation Honda Accord?

1 Answers
Ferreira
07/29/25 2:06pm
7th generation Accord time adjustment can be done by pressing the "CLOCK" button. The clock adjustment steps for the 7th generation Accord are as follows: 1. After powering on the vehicle, locate the "SOUND" button on the center console panel, with "CLOCK" labeled on its right. Press and hold the "SOUND" button, then release after hearing a "beep" sound. 2. The time display on the LCD screen will start flashing. Find the "NR" button and "DISC-" button on the center console panel. 3. Use the "NR" and "DISC-" buttons to adjust the time display. The "NR" button is labeled with H below it, used for adjusting the hour display; the "DISC-" button is labeled with M below it, used for adjusting the minutes. 4. Once the time is accurately adjusted, press the "SOUND" button again to save the settings.
Was this review help?
15
5
Share
More Forum Discussions

What is a Lada car?

Lada is a Russian car brand, which is the largest automobile manufacturer in Russia. This brand belongs to the Volga group. Here is some relevant information about Lada cars: Lada cars are not commonly seen in China. In fact, Lada has many SUV models and some off-road vehicles. The Russian automobile manufacturing industry is not very developed, so there are relatively few Russian car brands. The status of Lada in Russia is equivalent to that of Hongqi in China. The most successful model of Lada is the VAZ-2101, which is based on the Fiat 124 four-door sedan. In the 1980s and 1990s, Lada was exported all over the world, with more than 60% of its production being exported abroad.
9
0
Share

What is the purpose of the shark fin on a car?

The shark fin on a car primarily serves functions such as signal reception, static electricity discharge, air disturbance, and decoration. The shark fin-style car antenna has continuously evolved in modern development, integrating various powerful automotive electronic functions like FM, GPS, and GSM. Its built-in structure effectively prevents antenna theft, enhancing safety and security. It also cleverly combines aerodynamic principles with aesthetic design, effectively reducing airflow noise. Signal Reception: Generally, the shark fin on the car roof contains an electronic signal transmitter. The car's navigation system locates the vehicle through the equipment inside the shark fin. Additionally, it can provide signals for devices like the car radio and Bluetooth, enhancing signal strength. Static Electricity Discharge: The shark fin on the car roof can discharge static electricity inside the vehicle in dry environments, avoiding unnecessary issues caused by static. Besides the shark fin, static electricity can also be discharged from the car's rear to the road using a metal chain. Air Disturbance: The shark fin on some performance cars can create air disturbance, aligning with aerodynamic principles. It helps press the car onto the road at high speeds, improving stability.
18
1
Share

How to Choose Between the New Sagitar and Corolla?

It is well-known that most of Corolla's engines are better than the Sagitar's EA211, with the advantage of being more refined and having lower fuel consumption compared to average cars. In terms of transmissions, technically, the Corolla's CVT transmission is superior to the Sagitar 1.6's AT transmission, and it has its own merits compared to the Sagitar 1.4T's DCT transmission. The 1.4T DCT's advantage lies in high torque at low RPM, but for compact cars, the torque transmitted by the CVT is actually sufficient. If you prefer the 'stiff' driving feel of German cars, enjoy flexible acceleration, often go on long trips, and have comprehensive requirements for configurations, then choosing the Sagitar is definitely the right choice. If you prefer quietness, comfort, and cost savings, and most of your driving time is in congested urban areas, then the Corolla Hybrid will not disappoint you.
6
0
Share

How to cancel the exemption application submitted on 12123?

To cancel the application for the exemption mark on 12123, you can cancel it through the 12123 APP, visit the vehicle management office to cancel the application, or call the vehicle management office to cancel the application. Relevant details are as follows: Introduction to 12123: 12123 is a mobile APP where you can apply for an exemption mark. Exemption regulations: After the new regulations were introduced, non-commercial vehicles within 6 years can apply for online exemption. Although the vehicles are exempt from inspection for 6 years, it is still necessary to collect the annual inspection mark every 2 years. Many car owners apply for the exemption mark on the 12123 APP.
19
5
Share

What to Do When Push-to-Start Doesn't Work in Winter?

There are many reasons why push-to-start may not work in winter, and solutions vary depending on the issue. Below are the common reasons and solutions for failure to start: Steering wheel lock causing failure to start: When parking, if the steering wheel is not straightened and remains at a slightly larger angle (e.g., over 30 degrees), the steering wheel will automatically lock as an anti-theft measure. In this case, the key may not turn, preventing ignition. Solution: Apply force to turn the steering wheel while simultaneously turning the key to unlock the steering wheel, then attempt to start the car. Push-to-start may encounter a dead smart key battery: The key is inside the car, but the dashboard always displays a key matching error. This occurs because the smart key battery is dead, and the start system cannot detect the weak signal emitted by the key. Solution: Place the smart key directly on the start button, then press the button to start. If the remote key battery is dead or there is another issue preventing proper matching, insert the key into the emergency backup key slot and press the start button to start the car. New car not pressing the brake before push-to-start: For borrowed or newly purchased cars, push-to-start vehicles require pressing the brake pedal to ignite. Pressing the start button without pressing the brake only activates the car's electrical system but does not start the vehicle. Solution: Press the brake pedal first, then use push-to-start.
16
1
Share

What are the dimensions of the Buick Excelle?

The body dimensions of the Buick Excelle are as follows: Length (mm): The length is 4609mm. Width (mm): The width is 1798mm. Height (mm): The height is 1486mm. Wheelbase (mm): The wheelbase is 2640mm. Additional information: Background: The all-new Buick Excelle was officially launched on October 16, 2017, and for the first time introduced General Motors' new-generation 1.3T/1.0T Ecotec dual-injection turbocharged engines. In 2018, the Super Connected Edition was introduced, featuring an upgraded version of the Buick eConnect connectivity technology and a redesigned in-vehicle human-machine interface. Configuration: In terms of safety features, the 2018 new Excelle is equipped with the SBZA side blind zone warning system, TPMS intelligent tire pressure monitoring system, rear parking radar, Bosch ESP9.1 electronic stability control system, laser-brazed integrated roof, and electronic anti-glare interior rearview mirror.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.