How to adjust the chassis height of NIO ES8?

What to Do When Feeling Lack of Power After an Oil Change?

If you experience a lack of power after changing the engine oil, you can try the following solutions: 1. Replace the oil filter: A faulty or clogged oil filter can cause issues, so it's generally recommended to replace the oil filter along with the new oil. 2. Clean the engine lubrication system during the oil change: If the engine lubrication system hasn't been cleaned for a long time, deposits can accumulate. Changing the oil may dislodge some impurities, suspending them in the oil and clogging the filter, leading to power loss. 3. Pay attention to the oil quantity when adding oil: Adding too much or too little oil can both cause power issues, which should improve after the second oil top-up.

6

4

Share

Is there a difference between CVT and ECVT?

The following are the specific differences between CVT and ECVT: 1. Structure: The structure of CVT mainly consists of two sets of pulleys and a transmission belt, oil pump, torque converter, actuator, sensors, control computer, etc. The composition is relatively complex, and the steel belt has limited torque capacity, so it is generally only used in small vehicles as a transmission system. ECVT includes complex mechanisms such as clutches, torque converters, or gear shaft sets found in traditional transmission systems, and is composed of a set of planetary gears and two motors. 2. Working principle: In CVT technology, Motor 2 is responsible for starting, low-speed driving, and hybrid driving; Motor 1 is mainly responsible for starting the engine and generating electricity, and the engine does not directly drive the wheels in most cases. The engine is connected to the planetary carrier, Motor 1 is connected to the sun gear, Motor 2 is connected to the outer ring gear, and the outer ring gear is connected to the power output shaft. ECVT not only transmits power but also couples the energy of the engine and motor to achieve power output. It is actually a power combination system, specifically designed for the power distribution mechanism of hybrid models. 3. Power solution: CVT refers to the ordinary mechanical continuously variable transmission. ECVT is the electric transmission mechanism of Toyota's strong hybrid solution, which can achieve electric drive, continuously variable transmission, and energy recovery.

5

1

Share

What is the fuel consumption of the Toyota Land Cruiser 4.0?

Toyota Land Cruiser 4.0 has a MIIT comprehensive fuel consumption of 13.3L/100km. Here is an introduction to the Toyota Land Cruiser 4.0: 1. Exterior: The front grille of the Toyota Land Cruiser still adopts a large-size horizontal chrome strip design, paired with a through-type air intake below the new car. The headlight assembly of the new car will also be traversed by silver chrome decoration. 2. Side Profile: The new car model features prominent wheel arches and fender designs, further enhancing its off-road performance and passing ability. 3. Rear: The Toyota Land Cruiser adopts a floating design. The rear taillights are relatively large in size, paired with a more blackened design for the rear bumper. Additionally, the new car model does not come with a rear-mounted spare tire. 4. Chassis: The new Land Cruiser will be built on Toyota's latest TNGA architecture. Although it still uses a body-on-frame structure, the chassis will undergo lightweight and safety upgrades, including the latest version of the TSS safety assistance suite, resulting in better dynamic performance. 5. Transmission System: It is matched with a 10-speed automatic transmission.

1

3

Share

Is a Physical Examination Required for a Driver's License?

Obtaining a driver's license requires a physical examination. The examination primarily includes checks for vision, height, color blindness, hearing, as well as the upper limbs, lower limbs, torso, and feet to identify any abnormalities. The physical examination items for a driver's license include: 1. Height: Applicants for large passenger vehicles, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized passenger vehicles must be at least 150 cm tall. 2. Color Vision: Applicants must not have red-green color blindness. If they do, they are immediately disqualified, and other tests are unnecessary because recognizing traffic lights is essential on the road. 3. Hearing: Applicants must be able to hear a tuning fork from 50 cm away and distinguish the direction of the sound source. Failure to do so results in disqualification. 4. Vision: Applicants for large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, uncorrected or corrected visual acuity must be at least 4.9 on the logarithmic visual acuity chart.

10

1

Share

What is the actual measured fuel consumption of the Lynk & Co 05?

The official MIIT fuel consumption of the Lynk & Co 05 is 9.5L per 100 kilometers. Here is some related information about the Lynk & Co 05: 1. Lynk & Co 05: It is a compact SUV under the Lynk & Co brand, with a wheelbase of 2734mm, and dimensions of 4592mm in length, 1879mm in width, and 1628mm in height. 2. The Lynk & Co 05 is equipped with: A 2.0-liter turbocharged engine. Its maximum power is 187kW, and the maximum torque is 350 Nm. The engine's maximum torque is achieved between 1800 and 4800 rpm, and the maximum power is reached at 5500 rpm. 3. The front suspension of the Lynk & Co 05: Uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension. The multi-link independent suspension is an improvement based on the double-wishbone suspension, where the two wishbones are replaced with separate links.

20

3

Share

How to Compensate the Other Party in Case of Full Liability for a Vehicle Accident?

After a traffic accident occurs, if one party is fully at fault, they should compensate the other party for all losses. When it comes to compensation, the insurance company should first cover the damages within the compulsory traffic insurance liability limit. Any amount exceeding this limit will then be covered by the insurance company within the third-party liability insurance limit. Below is an introduction to full liability in car accidents: 1. Claim: The term 'claim' covers a wide range of scenarios, including single-party accidents, two-party accidents, multi-party accidents, and even situations where a parked car is scratched by someone else. Essentially, any incident where the insurance company pays for vehicle repairs can be referred to as a 'claim.' 2. Reporting the Accident: In the event of a traffic accident, it is necessary to call the 122 accident hotline. The police will determine the liable party, and the party found at fault should then report the incident to their own insurance company. 3. Inspection and Damage Assessment: After receiving the report, the insurance company will inspect the vehicle and assess the damages to determine the compensation amount. If the claimed amount exceeds the insurance coverage limit, the vehicle owner or the at-fault party will need to pay the difference out of pocket.

6

5

Share

How to adjust the chassis height of NIO ES8?

What to Do When Feeling Lack of Power After an Oil Change?

Is there a difference between CVT and ECVT?

What is the fuel consumption of the Toyota Land Cruiser 4.0?

Is a Physical Examination Required for a Driver's License?

What is the actual measured fuel consumption of the Lynk & Co 05?

How to Compensate the Other Party in Case of Full Liability for a Vehicle Accident?

How Long is the Mercedes-Benz Warranty Period?

How Long Can a Car Battery Last Without Use?

Is it not allowed to drive barefoot?

Can a C1 driver's license operate agricultural vehicles?