How to Adjust the Car Body When It's Not Straight While Parking by the Side?

2 Answers
ChristopherDella
07/24/25 5:19am
Here are the methods to adjust the car body when it's not straight while parking by the side: 1. Use the wiper to determine if the front of the car is straight: Compare the wiper with the road markings and maintain a fixed distance or angle while driving. If it deviates, it indicates that the front of the car is not straight. Additionally, depending on each person's height, other parts of the front of the car can also serve as reference points, such as the corner of the roof or the reinforcement ribs. 2. Look into the distance: Actually, the most crucial point to determine if the front of the car is straight is to learn to look into the distance. Observe distant traffic lights, the rear of the car in front, lane lines, etc., to see if the car body is straight.
Was this review help?
11
0
Share
DiReed
08/11/25 1:00am
It's quite common for the car body to be tilted when parking. My driving instructor told me that if you notice the car isn't aligned properly, you shouldn't immediately jerk the steering wheel. The correct approach is to slowly drive forward about half a meter while observing the distance between the rear wheel and the curb through the left rearview mirror. If the right rear wheel is too far from the curb, gently steer to the right; if it's too close, adjust to the left. Turn the steering wheel no more than half a turn at a time, and straighten it immediately after adjustment. The rear of the car will gradually straighten out like a fish's tail. Keep the speed below 5 km/h during the adjustment to avoid scraping the wheel rims. Once parked, remember to engage the handbrake and shift to P. Before getting out, use the rearview mirror to confirm that the car body is about two fists' distance from the curb for the perfect alignment.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

Can the Fit Handle Long-Distance Travel?

The automatic transmission Fit is capable of long-distance travel as long as you avoid racing and keep the speed below 120 km/h. Here are some precautions to take: 1. Check the brakes: Inspect the vehicle's condition (brakes, tire pressure, etc.) before departure and make necessary adjustments to enhance safety. 2. Check the tools: Ensure that the spare tire, jack, and wrench are all in place and that the tools are complete. Also, make sure the spare tire is in good condition. 3. Check the tires: Regularly inspect the tire wear. If the tires are severely worn, replace them promptly to avoid delays and prevent accidents on the road.
15
1
Share

What are the requirements for motor vehicle driver's license photos?

Here are the requirements for motor vehicle driver's license photos: 1. Time requirement: The photo must be taken within 6 months before the applicant applies for the driver's license service. 2. Appearance and clothing requirements: The photo must be a straight-edged, front-facing, color, bareheaded, single-person half-length ID photo without a hat, scarf, uniform, or colored glasses. Long-haired individuals should expose both ears, and the head or face should not have any tilting, turning, heavy makeup, or accessories that affect facial feature recognition. 3. Photo size requirements: The photo size should be 32mm×22mm, with a head width of 14mm~16mm and a head length of 19mm~22mm.
2
0
Share

What type of engine oil should be used for the Sagitar 1.6?

It is recommended to use full synthetic engine oil, as it provides excellent lubrication and can extend the engine's service life. Here is the relevant information: 1. Sagitar: The Sagitar is a joint venture A+ class sedan brand under FAW-Volkswagen. It was introduced to the Chinese market on April 9, 2006, and its predecessor is the fifth-generation Volkswagen Jetta sedan, positioned as a "German high-performance sedan." 2. Full synthetic engine oil: Full synthetic engine oil is a high-grade lubricant. It is derived from ethylene and propylene dispersed from natural gas or crude oil, which then undergo complex chemical reactions such as polymerization and catalysis to form a lubricating fluid composed of large molecules.
20
0
Share

What are the advantages of car leather seats?

Car leather seats offer the following advantages: 1. Easy to clean: Compared to fabric-covered seats, dust only settles on the surface of leather seats and does not penetrate deep into the seat. Therefore, a simple wipe with a cloth can complete the cleaning process. For fabric seats, you may need to purchase seat covers, otherwise, once they get dirty, stains may seep into the seat's interior. 2. Better heat dissipation: Although leather can absorb heat, it performs better in dissipating heat. 3. Aesthetically pleasing: The combination of leather and interior can showcase your personality and elevate the car's class. Ordinary fabrics or other materials cannot match its appeal. Therefore, leather seats are generally the first choice for enhancing a car's premium feel.
5
5
Share

How Often Should the Antifreeze in Nissan X-Trail Be Replaced?

Nissan X-Trail's antifreeze should be replaced every two years or every 30,000 kilometers. To prevent excessive foaming that could reduce the heat exchange efficiency between the antifreeze and engine components, ensure the product is within its validity period when adding it. If suspended particles, sediment, or signs of deterioration or discoloration are found in the antifreeze, it should be replaced promptly, and the system should be cleaned. The antifreeze replacement procedure is as follows: Before completely replacing the antifreeze, conduct a thorough inspection to check for any leaks or cracks in the pipes, with particular attention to the five-way hose. The antifreeze is distributed to different parts of the car through the five-way hose to perform its function. If there is any leakage of antifreeze in this section, replace the hose or resecure the connection as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continue to pour water into the reservoir so that it flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially flowing out of the reservoir will have a faint pink tint. Continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new antifreeze through the radiator hose. Then, pour another container of antifreeze into the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the antifreeze to the "MAX" mark on the reservoir.
14
5
Share

Why does the newly added fuel deplete quickly?

Newly added fuel seems to deplete quickly because most car fuel tanks are designed to be smaller at the top and larger at the bottom. When the tank is full, this design creates the perception that the upper half of the fuel is consumed rapidly, while the lower half burns slightly slower. Here are some details about car fuel tanks: 1. Fuel Tank Design: The fuel tank is one of the most important components of a car. Its capacity determines how far a vehicle can travel on a single fill-up. To maximize capacity, fuel tanks are often designed as large as possible. To achieve this, they are typically not shaped as perfect rectangles, as such shapes are difficult to fit under the car. Irregular shapes allow for better placement. 2. Things to Note: If the owner fills the tank to the brim, the system will automatically add the extra 10% of fuel to the upper half of the tank, making the fuel seem to last longer. Conversely, if the tank isn't filled completely but still shows 100%, the fuel consumption may feel faster.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.