How to Adjust the Brightness of the Reversing Camera?

Is it allowed to turn right at a red light?

Full-screen traffic signals allow right turns on red. Below are specific explanations regarding penalty points and fines after turning right: 1. Presence of a no-right-turn sign: If there is a no-right-turn sign next to the circular signal, turning right at this time is considered running a red light, which will be captured by traffic cameras, resulting in 6 penalty points and a fine. 2. Failure to yield to pedestrians: Turning right at a circular red light without yielding to pedestrians may result in 3 penalty points and a fine. Especially at crosswalks, pedestrians on the crosswalk have the right of way. Failing to yield to pedestrians when turning right at a circular red light will result in 3 penalty points and a fine. Even if there is no no-right-turn sign at the circular signal, drivers must still yield to pedestrians. 3. Incorrect lane: If the current lane is not designated for right turns, turning right is not allowed. Otherwise, it will be considered a violation of road traffic signs, resulting in a fine and 2 penalty points.

15

1

Share

Is it harmful to stall and park in D gear?

For automatic transmission vehicles, it is generally not possible to stall while in D gear during driving. If the car stalls once in a while with the gear still in D, it won't have any significant impact on the vehicle. The only issue is that you won't be able to remove the key unless the gear is in P. Simply switch to P gear after powering on again. The correct stalling procedure is as follows: 1. Stall in P gear. Only by stalling in P gear can you remove the key. If the car stalls in D gear, you must switch to P gear before starting the engine to avoid damaging the transmission. 2. Do not shift to D gear after stalling. Gear shifting should only be done after the vehicle has come to a complete stop. 3. Shift to N gear only after the vehicle has come to a complete stop, and the same applies to R gear. This will prevent damage to the transmission.

18

4

Share

What is the function of the engine camshaft?

The function of the camshaft is to open the valves. The following is a related introduction about the engine camshaft: 1. Structure: The main body of the camshaft is a cylindrical rod approximately the same length as the cylinder group. It is fitted with several cams to drive the valves. The camshaft is supported in the camshaft bearing hole through the camshaft journal, so the number of camshaft journals is an important factor affecting the support stiffness of the camshaft. If the stiffness of the camshaft is insufficient, bending deformation will occur during operation, affecting the valve timing. 2. Camshaft position: The position of the camshaft can be divided into three types: lower-mounted, mid-mounted, and top-mounted. The camshaft of the lower-mounted valve mechanism is located in the crankcase, the camshaft of the mid-mounted valve mechanism is located in the upper part of the engine block, and the camshaft of the top-mounted valve mechanism is located on the cylinder head.

1

0

Share

What Causes a Car's Air Conditioner to Stop Blowing Air Suddenly?

The blower, being the core component that determines whether the air conditioner blows air or not, will definitely stop functioning if it malfunctions. Possible causes of blower failure include overheating damage to internal coils or capacitor failure. Car owners can diagnose potential issues by turning the air conditioner's fan speed and air volume to maximum and listening for abnormal sounds from the blower. Relevant information about car air conditioner filters is as follows: Introduction: A car air conditioner filter is a specialized filter designed for purifying the air inside the vehicle cabin. It utilizes activated carbon composite filter cloth, which combines highly efficient adsorption material (activated carbon) with long-fiber non-woven fabric, featuring a compact structure. Function: It effectively filters smoke odors, pollen, dust, harmful gases, and various odors. The filter also efficiently captures and adsorbs particulate impurities, achieving oil filtration and air purification performance.

13

4

Share

Is a Car Considered a Total Loss if It Has Been Cut?

Cutting the rear quarter panel is considered a major accident for a car. If the rear quarter panel of a car has been cut and replaced, then it is classified as an accident vehicle. If only panel beating repairs were done without involving cutting and welding, it is not considered an accident vehicle. The rear quarter panel is also sometimes referred to as the rear apron. In rear-end collisions, the first part to be damaged is the rear bumper, followed by the rear apron. More relevant information is as follows: Replacement: Replacing the rear apron is not a simple task. It involves drilling each weld point one by one; just drilling out the weld points of the rear apron can take half a day. Additionally, welding and applying sealant afterward is very troublesome. Therefore, whether to replace or repair will depend on the actual situation. Note: Generally, if the rear apron is slightly dented, it can be slowly pulled out using a frame or a pull hammer without cutting the rear apron. However, if the spare tire floor is severely deformed, especially if the frame is damaged, then cutting the rear apron is unavoidable. The rear apron is cut off, the frame and spare tire chassis are straightened, and finally, a new rear apron is welded on.

3

5

Share

Is It Advisable to Pour Water on a Car to Cool It Down After Exposure to Sunlight?

It is not advisable to use the method of pouring water to cool down a car after it has been exposed to sunlight. Here are the specific details: Hazards of cooling with cold water: Metal components in a car have the property of expanding with heat and contracting with cold. After exposure to sunlight, the temperature of the car's paint surface is very high. If you rinse it with water at this time, the paint surface can easily be damaged, and paint peeling may occur. Correct cooling methods: Before driving, check whether the cooling water is sufficient and whether the thermostat is functioning properly. While driving, always pay attention to the reading on the water temperature gauge, which should not exceed 95°C. When the temperature is too high, to enhance the convection of cooling air, you can lift the engine hood to facilitate ventilation and heat dissipation.

10

1

Share

How to Adjust the Brightness of the Reversing Camera?

Is it allowed to turn right at a red light?

Is it harmful to stall and park in D gear?

What is the function of the engine camshaft?

What Causes a Car's Air Conditioner to Stop Blowing Air Suddenly?

Is a Car Considered a Total Loss if It Has Been Cut?

Is It Advisable to Pour Water on a Car to Cool It Down After Exposure to Sunlight?

How to Determine if Fake Engine Oil Has Been Added?

What is the function of the car air conditioner ION?

Is Engine Air Leak Serious?

Can Alcohol Be Sprayed in a Car for Disinfection?