How to Adjust the Audio System in Golf 7 for Optimal Performance?

What Causes Oil in the Intake Manifold?

Reasons for oil in the intake manifold: 1. Prolonged engine idling; dirty air filter; clogged or deformed crankcase ventilation system. 2. Clogged, leaking, or deformed turbocharger oil inlet/return pipes; coking of lubricating oil in the turbocharger's intermediate housing. 3. Cylinder wear causing piston ring blow-by; excessive flow resistance in the exhaust system. 4. Prolonged imbalance between intake pressure and the turbocharger bearing housing pressure, leading to oil leakage from the turbocharger into the compressor due to pressure differential acting on the seals. 5. Overfilling of engine oil increases the unavoidable lubricant content in the crankcase ventilation system, promoting oil entry into the intake pipe through the ventilation system.

7

1

Share

Where is the OBD connector of Geely Panda?

Geely Panda's OBD connector is located below the left side of the steering wheel. You can see the OBD interface by lowering your head. The Geely Panda is a microcar with a 5-door, 4-seat hatchback body structure. Taking the 2016 Cool Fun edition as an example, its body dimensions are: length 3815mm, width 1648mm, height 1530mm, with a wheelbase of 2340mm and a fuel tank capacity of 35 liters. The 2016 Cool Fun edition is equipped with a 1.0L naturally aspirated inline 2-cylinder engine, with a maximum power of 50kW at 6000 rpm, a maximum torque of 88Nm at 3600 rpm, mated with a 5-speed mechanical automatic transmission.

3

4

Share

What is the fuel consumption of the Tank 300?

The official combined fuel consumption of the Tank 300 is 9.3L/100km. The relevant introduction of the Tank 300 is as follows: 1. Body dimensions: The length, width, and height of the Tank 300 are 4720mm, 1930mm, and 1927mm respectively, with a wheelbase of 2750mm, positioning it as a compact SUV. 2. Powertrain configuration: The Tank 300 is equipped with a 2.0-liter turbocharged engine, with a maximum power of 167kw at 5500 rpm, and a maximum torque of 387 Nm between 1800 to 3600 rpm. The engine is paired with an 8-speed automatic transmission.

18

2

Share

What Does Passenger Liability Insurance Mean, and Do I Need to Purchase It?

Passenger liability insurance is one of the main types of commercial vehicle insurance, and the owner can decide whether to purchase it based on their needs. Below is some information about passenger liability insurance: 1. Definition: Passenger liability insurance, also known as seat insurance, covers accidental incidents involving the insured vehicle that result in injuries or fatalities to the driver or passengers. The insurance company will provide compensation according to the terms of the passenger liability insurance policy. 2. Features: When purchasing seat insurance, you can choose the coverage based on your needs and consider your actual circumstances. Seat insurance is a mandatory industry requirement for vehicles engaged in passenger transport and is a highly necessary insurance beyond compulsory traffic insurance. Seat insurance is divided into 20 tiers, and the higher the coverage, the greater the potential compensation.

18

3

Share

How to Turn on the Fog Lights on the 10th Generation Civic?

The method to turn on the fog lights on the 10th Generation Civic is: Rotate the light control switch from the 'off' position upwards to the front fog light position. The Civic is a compact car under Honda. Taking the 2019 Civic Shangqing Edition as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4658mm in length, 1800mm in width, and 1416mm in height, with a wheelbase of 2700mm. The 2019 Civic Shangqing Edition is equipped with a 1.0T turbocharged engine, delivering a maximum power of 92 kW and a maximum torque of 173 N·m. It adopts a front-engine, front-wheel-drive layout, with a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.

2

1

Share

How to Install the Borui Generator Belt?

Borui generator belt installation method is as follows: 1. First, drive the vehicle onto the lift and disconnect the battery. 2. Remove the water pipe joint bracket, insert the tool into the special opening of the belt tensioner, then use a wrench to turn the automatic belt tensioner clockwise and loosen the engine auxiliary system belt. 3. Then install the belt and fix the tensioner. The following is part of the introduction about the tensioner: 1. The tensioner is a tensioning device for belt transmission. When the center distance of the belt cannot be adjusted, the tensioner can be used to tension the belt. 2. The tensioner is a follower wheel pressed on the belt to change the wrap angle of the pulley or control the tension of the belt.

12

5

Share

How to Adjust the Audio System in Golf 7 for Optimal Performance?

What Causes Oil in the Intake Manifold?

Where is the OBD connector of Geely Panda?

What is the fuel consumption of the Tank 300?

What Does Passenger Liability Insurance Mean, and Do I Need to Purchase It?

How to Turn on the Fog Lights on the 10th Generation Civic?

How to Install the Borui Generator Belt?

How to Lift Up the Rear Seats of a Tesla?

What is the fuel tank capacity of the BMW X1?

Where is the trunk button on the Toyota Camry?

How to Turn On the Air Conditioning in the Excelle?