···
Log in / Register

How to adjust the ambient lighting in the 2021 Audi A6L?

1 Answers
Yvonne
09/06/25 5:28am

You can adjust the interior ambient lighting through the MMI display. Press the CAR button to select the system and enter the background lighting interface. The ambient lighting at the front footwells, rear footwells, front door panels, and rear door panels can all be set via the MMI.

Was this review help?
2
0
Share
More Forum Discussions

How to Repair a Cracked Car Windshield?

Use a screwdriver to remove the black protective strips around the windshield. Use a steel wire to pull apart the sealant around the entire windshield. Use a small knife blade to scrape off any remaining black sealant from the car. Apply polyurethane sealant to the windshield frame. Install the windshield.
7
3
Share

How to Clear the Malfunction Indicator Light in a Car?

It indicates there is an engine fault, but this fault does not affect the normal operation of the engine. However, it is necessary to perform inspection and repair. It indicates there is a serious engine fault, which normally requires immediate repair. You can drive in emergency situations, but you need to constantly monitor the engine's working condition.
3
5
Share

What to Do When the Car Door Lock Won't Open?

Check if the vehicle's battery has power. Inspect the car key for any damage. Replace the door lock block cable. Use the spare key to unlock the door. Check if the child safety lock is engaged.
15
3
Share

How to Renew a Driver's License Now?

Remember to bring a 1-inch white background photo. Go to the nearest or most convenient designated driver's physical examination hospital's examination department, follow the steps: get the form → fill out the form (attach the photo) → pay the fee → undergo the physical examination. Go to the nearest or most convenient traffic police station office hall to submit the physical examination form and receive a receipt.
1
2
Share

How to Turn On the Car Headlights?

To turn on the low beams, rotate the light switch to the low beam position. To activate the high beams, push the lever forward to keep them on continuously. Pull the lever inward once to flash the high and low beams alternately. The switch for the headlight washer and the windshield washer is located together.
3
4
Share

How to Reset the Trip Mileage on a Volvo?

There is a protruding small round button on the dashboard. Press and hold this button for a while to reset the trip mileage to zero. Remove the dashboard cover, take off the needles for speed, fuel gauge, water temperature, RPM, etc., then use a flathead screwdriver to adjust the mileage gear - you can roll back or reset it to zero.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.