How to Adjust the Ambient Lighting in BMW 5 Series?

How to Perform Tire Rotation?

Tire rotation methods are as follows: 1. For bias-ply tires, swap the tires on the same axle to ensure even wear on both sides; 2. For radial tires, rotate them within the same side of the vehicle. The benefits of tire rotation include: 1. Promoting even tire wear; 2. Extending tire lifespan; 3. Preventing irregular tire wear; 4. Enhancing driving safety. Tire maintenance methods are: 1. Maintain correct tire pressure; 2. Regularly inspect tires for bulges, cracks, cuts, punctures, or abnormal wear; 3. Check tire surfaces for stones, nails, or other hard objects and clean them promptly; 4. Perform four-wheel rotation.

13

3

Share

What car is the 'keys' in the middle of the steering wheel?

The 'keys' in the middle of the steering wheel is not a car brand's logo. The 'keys' emblem on the steering wheel is actually 'key!s', which is a brand of quick-release steering wheels specifically designed for competitive racing. Since modified steering wheels are universal, any steering wheel that fits its base can be installed. The steering wheel is a wheel-shaped device used to control the direction of travel, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. As quick-release steering wheels are mostly used in competitive racing, to reduce weight and simplify the structure, such steering wheels are not equipped with airbags or other electronic control systems.

15

3

Share

Where is the door drain hole of the Infiniti Q50L?

The door drain hole of the Infiniti Q50L is located inside the door seal strip at the bottom of the door. You can see it by flipping the door seal strip outward. Since the drain holes on the door are positioned low, they are prone to clogging with mud when driving on muddy roads. Therefore, it is essential to clean the door drain holes promptly. Taking the 2019 Infiniti Q50L as an example, its body structure is a four-door, five-seat sedan with the following dimensions: length 4867mm, width 1823mm, height 1456mm, wheelbase 2898mm, fuel tank capacity 76L, trunk capacity 500L, and curb weight 1721kg.

15

5

Share

How to Solve High Oil Pressure?

The solutions for high oil pressure are: 1. Adjust the clearance between the shaft neck and bearing of the pressure lubrication part; 2. Clean the oil pipes and oil passages, and maintain the filter; 3. Select the appropriate oil grade; 4. Replace the oil with suitable viscosity; 5. Check and adjust the pressure relief valve on the oil pump test bench to ensure the oil pressure meets the specified requirements. The causes of high oil pressure are: 1. Excessive oil viscosity; 2. Improper adjustment of the pressure relief valve; 3. Faulty oil pressure gauge or sensor. The functions of engine oil are: lubrication and anti-wear, auxiliary cooling, cleaning, sealing and leak prevention, rust and corrosion prevention, and shock absorption.

4

3

Share

Can the Subject 2 test results be checked on the same day?

Subject 2 test results cannot be checked on the same day. If you pass the driving test Subject 2 on the same day, the results can be checked after 24 hours. The following is an introduction to the content related to Subject 2: 1. Test requirements: The requirement for parallel parking is that the driver must park the vehicle in the right parking space without the wheels touching the lane boundary or the parking space boundary. 2. Subject 2 test content and requirements: The five assessment items are reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Subject 2 requires 26 class hours, including 2 hours of theoretical knowledge, so the actual practical hours are 24.

14

5

Share

What does trcoff mean?

trcoff refers to the Traction Control System. Pressing and holding this button can deactivate the Traction Control System. The Traction Control System relies on electronic sensors to detect when the driven wheels are rotating slower than the driving wheels, at which point it sends a signal to adjust ignition timing, reduce throttle opening, decrease fuel supply, downshift, or apply braking to the wheels to prevent wheel slippage. The functions of the Traction Control System are: 1. To prevent wheel spin when driving on slippery surfaces such as snow, ensuring smooth vehicle starting and acceleration; 2. To apply braking force to limit wheel slippage when the driving wheels lose traction, enabling stable vehicle turning during acceleration in corners; 3. To control the risk of vehicle skidding on steep slopes or rough rocky terrain.

12

2

Share

How to Adjust the Ambient Lighting in BMW 5 Series?

How to Perform Tire Rotation?

What car is the 'keys' in the middle of the steering wheel?

Where is the door drain hole of the Infiniti Q50L?

How to Solve High Oil Pressure?

Can the Subject 2 test results be checked on the same day?

What does trcoff mean?

What does the exclamation mark warning light in a Mercedes-Benz mean?

How to Find the Entrance of the S-curve in Subject 2?

Do I need to bring my ID card for the Subject 1 exam?

How to Repair a Cracked Rear Bumper?