How to Adjust the Air Conditioner's Auto Mode?

Where to Check the Mileage of a Car?

Car mileage can be viewed on the odometer, usually indicated by ODO, with the unit km following the numerical value, representing the total distance the car has traveled. Its function is to inform the driver of the distance covered, allowing for fuel cost calculations and indirectly reflecting the car's fuel efficiency. The car odometer also includes two LCD digital display windows connected to the same signal source, respectively accumulating the current trip mileage and the total mileage. The current trip mileage typically has four digits and can be reset for short-term counting, while the total mileage has six digits and cannot be reset. Generally, there are two types of car mileage: one is the total mileage the vehicle has traveled, and the other is the measurable mileage. The measurable mileage can be manually reset by the owner, usually with a small button (cylindrical) next to the number; pressing and holding it will reset the value. ODO is the abbreviation of the English word 'odograph,' representing the total mileage. TRIP stands for short-distance mileage, also known as the trip mileage, which is convenient for users to calculate the distance of each trip. The trip mileage can be reset by pressing and holding the clear button. It can also be used to calculate fuel consumption. The method to calculate the fuel consumption per 100 kilometers is to fill up the tank, reset TRIPA or TRIPB, drive 100 kilometers, and then fill up the tank again. The amount of fuel added represents the fuel consumption per 100 kilometers.

12

1

Share

What Lights Should Be Turned On When Driving in Heavy Rain?

When driving in heavy rain, turn on the fog lights. Only use the rear fog lights when the rain is extremely heavy. Fog lights emit a particularly penetrating beam that can not only illuminate the road ahead over a longer distance in rainy or foggy conditions, but also enhance visibility, making your vehicle more noticeable to others from a greater distance. Use the parking lights in light rain: The use of lights is crucial when driving in the rain. At the onset of rain when the sky gradually darkens but visibility remains relatively good, you should use the parking lights. Turn on the headlights or fog lights in heavy rain: In heavier rain where visibility is low, the rain itself can obstruct your view. Using headlights or fog lights can improve your visibility of the traffic conditions ahead. Additionally, in foggy conditions or when the side mirrors of the car are obscured by water, the clarity of the view can be reduced. If the vehicle behind you has its fog lights on, your car will be more easily noticed in the mirrors, thus enhancing safety. Do not use hazard lights while driving: Hazard lights are meant for emergency situations only. They should be used in very dangerous circumstances, such as when parking on the roadside, experiencing vehicle malfunctions or being involved in a traffic accident on urban roads, when towing a malfunctioning vehicle (both the towing vehicle and the towed vehicle should turn on the hazard lights), or when driving on highways in low-visibility weather conditions like fog, rain, snow, sandstorms, or hail with visibility below 100 meters.

2

1

Share

How to Enable Bluetooth Music on an Older Mercedes GLK300?

First, power on the vehicle and activate the multimedia system. Locate the Bluetooth function and enable Bluetooth on your phone, setting it to discovery mode. Once the car's system is detected, enter the verification code 0000 or 1234 to complete the Bluetooth connection.

2

Share

How to Enable Lift Mode on Older Mercedes-Benz S350?

Open the driver's door, insert the car key, press the one-touch start button to power on the vehicle, and the dashboard will light up. On the MMI control panel, press the CAR button followed by the SETUP button to enable the lift mode.

17

0

Share

How to reset the tire pressure light on an older BMW 3 Series?

When the tire pressure warning light on the dashboard remains illuminated, you should promptly visit a tire repair shop to inspect and fix the tire. After completing the tire repair, inflate the tires according to the pressure values specified on the label inside the fuel filler cap. Once all four tires have been restored to standard pressure, press and hold the tire pressure reset button next to the gear lever to reset the tire pressure light.

15

3

Share

Can the EGR valve of a National IV diesel vehicle be removed?

National IV diesel vehicles cannot operate without the EGR valve, as it affects the vehicle's exhaust emissions. Without it, emissions will not meet the standards, and the vehicle will fail the annual inspection. Here is some additional information: The EGR valve is an electromechanical product installed on gasoline engines to control the amount of exhaust gas recirculated back into the intake system. It is usually located on the right side of the intake manifold, near the throttle body, and is connected to the exhaust manifold via a short metal pipe.

14

4

Share

How to Adjust the Air Conditioner's Auto Mode?

Where to Check the Mileage of a Car?

What Lights Should Be Turned On When Driving in Heavy Rain?

How to Enable Bluetooth Music on an Older Mercedes GLK300?

How to Enable Lift Mode on Older Mercedes-Benz S350?

How to reset the tire pressure light on an older BMW 3 Series?

Can the EGR valve of a National IV diesel vehicle be removed?

Should the Air Conditioning Be Set to Internal or External Circulation During Long-Term Parking?

Do Cars Need Car Covers?

What is the size of the photo for a driver's license?

What Causes Brake Disc Noise While Driving?