How to Adjust Steering During Driving Practice?

How to turn off the auto start-stop in CX4?

The method to turn off the auto start-stop in Mazda CX4: There is an auto start-stop button on the car's center console. Press it to activate the auto start-stop function, and press it again to turn off the auto start-stop system. Here is some additional information: Auto Start-Stop: The auto start-stop system in cars is enabled by default. When the car is powered on, the auto start-stop system is activated. If the owner does not want to use the auto start-stop system, they can turn it off before driving. Mazda CX4 body dimensions: The Mazda CX4 has a body length of 4633mm, width of 1840mm, height of 1535mm, and a wheelbase of 2700mm.

2

1

Share

What Causes a Tire Blowout on the Highway?

Here are the specific reasons for tire blowouts on highways: 1. Low tire pressure: When tire pressure is too low, the wheel's sinking amount increases, radial deformation increases, friction between the tire surface and the ground rises, rolling resistance increases, and the internal stress of the tire body also rises. This causes the tire body temperature to rise sharply, the tire surface rubber to soften, and the aging process to accelerate, leading to localized delamination of the tire body and increased wear on the tire surface. Under these conditions, if the car continues to drive at high speeds on the highway, the above reactions will accelerate, significantly increasing the likelihood of a tire blowout. 2. Overinflated tires: When tire pressure is too high, the tension on the tire body cords increases, accelerating the fatigue process of the cords. Especially when driving with overinflated tires, overloaded, and at excessive speeds, the internal stress on the cords increases further, the tire temperature rises rapidly, rubber aging speeds up, and fatigue strength decreases. This results in severe wear on the central part of the tire surface, sawtooth-like wear on the side tread patterns, and cord breakage, leading to a tire blowout. 3. Incorrect tire installation: Wheel imbalance. Due to uneven mass distribution across different parts of the wheel, when the wheel rotates, centrifugal force generates significant impact forces in the wheel's rotation plane, causing the wheel to bounce and sway. This increases tire wear speed and subjects the cord layers to periodic impact loads, reducing the fatigue resistance of the cords. Especially at speeds above 100 km/h, wear caused by wheel imbalance becomes extremely severe, ultimately leading to a tire blowout.

1

Share

How to Operate the Brake Pedal After a Vehicle Has Driven Through Water

Methods for operating the brake pedal after a vehicle has driven through water: 1. After driving through water, while maintaining low-speed driving, you should slow down or stop to observe; 2. When passing through a waterlogged section, do not stop or shift gears, keep the throttle steady, do not release the throttle, and do not accelerate. Maintain a low gear with medium-high throttle to pass through at a constant speed; 3. If the vehicle stalls while driving, shift to neutral and then tow the vehicle to a location with less water accumulation; 4. After passing through the waterlogged section, remove moisture from the brake pads as soon as possible. While driving at low speed, press the throttle and lightly apply the brakes repeatedly. This will generate residual heat through friction between the brake drum and brake pads, completely evaporating the moisture.

13

5

Share

What class is the Xingrui?

Geely's Xingrui is an A+ class sedan with a wheelbase of 2800mm, almost reaching the standard of a B-class car. Configuration: The Xingrui not only offers spacious room and good loading capacity, but also provides an extremely comfortable riding experience. The interior is full of technological features, equipped with a large central control screen and leather-wrapped seats. The Xingrui also boasts rich safety configurations, with even the entry-level model featuring four airbags. Other models come standard with lane assist, active braking, and body stability systems. Performance: The Xingrui is powered by a 2.0T engine, delivering a maximum horsepower of 190 and a maximum torque of 300NM. The acceleration is smooth without any jerking. The solid chassis also ensures a premium driving experience, giving it a German car feel.

2

Share

How to Replace a Lost ETC Card?

The process for replacing a lost ETC card is as follows: 1. Bring the original and a copy of your ID card to a bank branch counter to apply for card modification or replacement; 2. Fill out an ETC service application form to report the loss of the ETC function, which will take effect within 24 hours of submission; 3. After receiving the new card, go to the designated bank branch to activate the ETC function. The ETC function will be automatically available 5 working days after card activation. The significance of ETC includes: 1. By collecting ETC information from toll stations, it helps narrow down the search scope for vehicles with electronic tags; 2. The interactive service information on the ETC website can provide feedback on customer information and user credibility; 3. It can be integrated with GPS and GIS to comprehensively improve the efficiency and level of highway transportation management and services.

14

2

Share

What Causes Reduced Engine Power in the Buick Verano?

The possible causes of reduced engine power include: poor fuel quality and clogged fuel lines, improper tire pressure, excessive carbon buildup and spark plug wear, dirty throttle body, or belt slippage/cracking. Inspect the vehicle's fuel system and ignition system for malfunctions. Avoid coasting in neutral: The engine's deceleration fuel cut-off feature makes neutral gear operation counterproductive for fuel economy. Regular vehicle observation: If oil stains are found on the ground, determine whether engine oil leakage has occurred and promptly communicate with the 4S dealership to eliminate safety hazards. Timely brake fluid replacement: When brake fluid becomes contaminated with moisture or shows visible impurities/sediment, replace it immediately or perform thorough filtration. Otherwise, insufficient braking pressure may occur, compromising braking performance.

4

0

Share

How to Adjust Steering During Driving Practice?

How to turn off the auto start-stop in CX4?

What Causes a Tire Blowout on the Highway?

How to Operate the Brake Pedal After a Vehicle Has Driven Through Water

What class is the Xingrui?

How to Replace a Lost ETC Card?

What Causes Reduced Engine Power in the Buick Verano?

How to Replace the Air Conditioning Filter in an Elysee?

How early can a vehicle's annual inspection be done?

What is the meaning of vehicle overall dimensions?

What is a green license plate?