How to Adjust Left-Right Deviation in Rearview Camera?

[McEthan]

Here are the steps to adjust left-right deviation in a rearview camera: 1. Start the vehicle. 2. Shift the gear to reverse. 3. Turn on the vehicle screen and activate the rearview camera. 4. Exit the vehicle, locate the rearview camera, and adjust its position by rotating it left or right to the appropriate position. Here is additional information about rearview cameras: 1. The rearview camera uses a far-infrared wide-angle lens installed at the rear of the vehicle, displaying obstacles behind the car clearly on the in-vehicle screen. 2. When the reverse gear is engaged, the system automatically activates the high-definition rearview camera at the rear, providing a clear view of the area behind the vehicle on the LCD display, helping the driver monitor rear road conditions.

[VanCassidy]

Last year, I just changed my car, and the reversing camera was misaligned—more blank space on the left and less on the right, making me always afraid of hitting something while parking. The reason was that the camera wasn’t installed straight and was tilted. I decided to adjust it myself: First, I asked a friend to help check the rear camera position, parked the car in neutral, and then manually rotated the camera housing slowly to align the lens straight backward. After adjusting, I went into the vehicle settings menu—usually under the driving assistance options on the multimedia screen—and found the reversing camera calibration function. I dragged the grid lines to align with actual reference points, like garage door pillars. The whole process was simple and took about ten minutes. After the adjustment, there’s been no misalignment since. Remember, if it’s not calibrated properly, reversing becomes dangerous as distance judgment can be off. Always pay attention to whether the image is centered when parking, and check the camera after any impact.

[SanKing]

Reverse camera misalignment is quite annoying. From my experience, the issue could stem from both hardware and software aspects. On the hardware side, a loose camera mount or improper installation position may cause the image to shift left or right. You can check this yourself by gently shaking the camera to see if it's stable. If not, tighten the screws or make slight angle adjustments. For software issues, access your vehicle's system settings (the path varies by brand, typically under Settings > Reverse Assist or Camera Options) to manually adjust the horizon line or reset calibration parameters. Some high-end vehicles require a diagnostic tool, so consult your user manual or visit a professional shop. After adjustments, test it by comparing the actual reverse position with the camera image. For safety, don't rely solely on the camera if misalignment is significant—use mirrors and rear radar first.

[LawsonRose]

When my reversing camera was misaligned, I went straight to the 4S dealership because I lacked the technical skills to adjust it myself and feared causing damage. The professionals quickly identified the cause: either the camera bracket had shifted or the software needed a reset. They used tools to reinstall and secure the camera in place, then performed a comprehensive calibration procedure in the system to ensure the image aligned accurately with reality. The entire process took about half an hour and wasn’t costly. Safety comes first—an inaccurate image during reversing can easily lead to collisions, especially at night or in rainy or foggy conditions when visibility is poor and you rely on it. If the misalignment was caused by an impact, don’t hesitate to get it repaired, and take the opportunity to check other sensors like the radar to ensure they’re functioning properly.