How to Adjust Idle Speed with Electronic Throttle?

1 Answers
VonKiara
07/25/25 12:15pm
Methods for adjusting idle speed with electronic throttle: The idle speed of an electronic throttle cannot be adjusted manually. It can only be adjusted using a car's computer diagnostic tool through the engine's control software. Nowadays, the idle speed adjustment for many car engines is based on the electronic throttle's regulation of the incoming air volume. Generally, this adjustment is managed by the engine's control system, and there is no way to manually adjust the electronic throttle's idle speed. Symptoms of unstable idle speed include: engine shaking during idle operation and uneven RPM. Causes may include: clogged idle air ports, malfunctioning idle control devices, weak spark in individual spark plugs, poor sealing of certain valves, leaks in the intake manifold, incorrect ignition timing (too early or too late), or improper idle speed adjustment.
Was this review help?
16
3
Share
More Forum Discussions

What Happens When a Car Lacks Engine Oil?

When a car lacks engine oil, it may experience increased noise, engine cylinder scoring, and abnormal operation of the solenoid valve. Increased Noise: When the engine oil is insufficient, it may lead to excessively low oil pressure, causing the oil pressure warning light on the dashboard to illuminate, alerting the driver. The engine noise may become louder due to the lack of oil, and the engine will also suffer from inadequate lubrication. Engine Cylinder Scoring: During operation, the engine oil forms an oil film on all necessary lubrication points, preventing direct contact between these components and thereby reducing wear. If these rubbing components come into direct contact, it will not only cause severe wear but also generate extremely high heat instantly, as the engine operates at very high speeds. This heat may lead to engine cylinder scoring. Abnormal Solenoid Valve Operation: When the oil level is too low, resulting in insufficient oil pressure, the engine's variable timing solenoid valve may malfunction. This can prevent precise control of the engine's intake and exhaust valves, leading to symptoms such as reduced power and increased fuel consumption.
19
1
Share

What are the differences between the second-generation and third-generation GM 6AT?

The differences between the second-generation and third-generation 6AT lie in the interior and exterior design as well as the body dimensions, with the third-generation model featuring a larger body size. Exterior Design: The third-generation Haval 6AT has been upgraded with a larger body size, featuring a more exaggerated exterior design and standard matrix LED headlights. The interior introduces dual floating screens for the first time, providing an unobstructed view of the dashboard and a strong sense of technology. The exterior dimensions measure 4653mm in length, 1886mm in width, and 1730mm in height, compared to the second-generation model's 4600mm, 1860mm, and 1720mm, showing improvements in all three dimensions. Engine: The second-generation model has a wheelbase of 2680mm, while the third-generation model is extended to 2738mm, an increase of 58mm, resulting in a noticeable improvement in interior space. The second-generation and third-generation models use different engines. The second-generation model is equipped with two engine options: a low-power 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The third-generation model uses a high-power 1.5-liter turbocharged engine.
17
2
Share

How to Repair a Slightly Dented Car Door?

Body panel repair is the best solution for fixing small dents on car doors and external dents on vehicles. Of course, after panel repair, another process is required, which is painting. This is because the metal panel surface will experience paint wear and peeling due to tool operations during the panel repair process. Methods for dealing with scratches on the car are as follows: 1. Hairline scratches: Hairline scratches can usually be removed by polishing or applying a rubbing compound. A simple wipe is often enough to make the hairline scratch disappear. 2. Light scratches: For light scratches, just prepare a tube of toothpaste. Toothpaste is very effective for shallow scratches that haven't damaged the car's primer. It can especially clean off traces left by other vehicles' paint during minor collisions or residues from sticky products like adhesives, most of which can be wiped away completely. 3. Moderate to deep scratches: Moderate and deep scratches cannot be repaired by polishing. For small dents with a depth not exceeding 5mm, they can be leveled by filling with putty before proceeding with touch-up painting.
3
3
Share

What Causes the Clicking Sound When Turning the Steering Wheel After Installing Coilover Suspension?

The reasons for the clicking sound when turning the steering wheel after installing coilover suspension are as follows: Loose Shock Absorber Mounting: Long-term vibrations during driving can cause the mounting nuts to loosen, leading to abnormal noise from the shock absorber. Solution: Tighten the mounting nuts. Insufficient Shock Absorber Oil: Lack of oil in the shock absorber can also cause abnormal noise. Check for oil leakage. If there is leakage, it is recommended to replace the shock absorber directly. If there is no leakage, inspect other components of the shock absorber system. Worn Rubber Bushings: Worn rubber bushings at both ends of the shock absorber create play at the mounting points, causing noise during driving. Solution: Replace the rubber bushings. Deformed Components: Deformation of the shock absorber piston rod, cylinder tube, or oil reservoir can cause abnormal noise and lead to shock absorber failure, even posing safety risks. Repair is not recommended (as it is complicated). Instead, replace the shock absorber with a new one.
6
5
Share

To What Extent Does the Rear Quarter Panel Need to Be Cut?

Rear quarter panels need to be cut when they are severely damaged and cannot be restored through welding. In cases where the rear quarter panel is damaged, whether it is replaced entirely or only the rear section is cut and replaced, it will increase the vehicle's damage to some extent. Impact of Cutting the Rear Quarter Panel: Although cutting the rear quarter panel does not affect performance, it can impact the aesthetic appearance of the car's paint. If the metalworking process is not done properly, the paint may crack over time. Therefore, if the rear quarter panel only has scratches, some corrections can be made, followed by welding and repainting. Cutting the Rear Quarter Panel Counts as a Major Accident: Cutting the rear quarter panel qualifies the car as a major accident vehicle because if the rear quarter panel has been cut and replaced, it indicates that the car has been involved in an accident where standard metal repairs were insufficient. However, if only metal repairs were performed without cutting or welding, it does not count as an accident vehicle, indicating only minor scratches or scuffs.
8
5
Share

What is the reason why the chassis of a Land Rover cannot be raised?

The reason why the chassis cannot be raised or lowered normally is that the air pump of the chassis lifting system cannot operate normally, or there is air leakage in the related air pipes connected to the air pump. When starting the engine and operating the chassis lifting, it is normal to hear the sound of the air pump working below. It is recommended to check whether there is a fault in the lifting system control unit. In addition, a fault in the chassis lifting height sensor can also cause it to malfunction. The following is relevant information about Land Rover: 1. Introduction: Land Rover is a British brand of all-terrain vehicles and sport utility vehicles, belonging to Jaguar Land Rover, currently including the Range Rover series, Discovery series, and Defender series. Land Rover was initially named after a single model by Rover Cars and later developed into a brand. 2. Appearance: The side lines of Land Rover vehicles are very clean and neat, with a very clean overall side profile, featuring simple engraved lines on the front and rear fenders. The LED daytime running lights are arranged along the seams of the headlight assembly, providing high visibility at night. The shape of the headlight assembly, combining squares and circles, carries the typical Land Rover family characteristics. The front face adopts a honeycomb grille design.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.