How to Adjust High Beam and Low Beam on a Sedan?
1 Answers
How to adjust high beam and low beam on a sedan is as follows: 1. For the standard of car low beam adjustment, it generally only specifies the light intensity and beam height. The low beam should illuminate the area 25-35 meters in front of the car, and the beam height should not be too high to avoid dazzling other vehicles and affecting driving safety. 2. The car low beam can be adjusted by yourself using the knob behind the headlight assembly with tools. Park the car 10 meters away from a wall, measure the distance from the low beam to the central axis, the distance from the high beam to the central axis, and the distance from the low beam to the ground; then move to the wall and mark the corresponding positions on the wall; observe whether the light beam is offset left or right, too high or too low. If the center of the headlight beam does not align with the marked point, it indicates an offset, which can be adjusted by rotating the headlight width adjustment knob to align the center of the headlight beam with the mark on the wall. 3. Generally, the headlight width is preset at the factory, and self-adjustment is not recommended. If there is an offset, fine-tuning can be done. During adjustment, the right headlight beam can be slightly adjusted to the right, which can help see the right side of the road more clearly in low visibility conditions such as rainy or foggy days. However, it is more recommended to go to a 4S shop or repair shop for standard adjustment.
