How to Adjust Electric Mirrors?
4 Answers
Electric mirrors can be adjusted by using the electric mirror adjustment button located on the left side of the driver's door. Here, 'L' represents the left rearview mirror, and 'R' represents the right rearview mirror. The mirrors are positioned on both sides of the car's front and inside the vehicle's cabin, reflecting the conditions behind, beside, and below the car, thereby expanding the driver's field of vision. Precautions for using mirrors: 1. Each vehicle is equipped with side mirrors on both the left and right sides and an interior rearview mirror. Their positions and angles should be appropriate for the vehicle model. 2. Before starting the car, the driver should observe the side and rear areas for any approaching vehicles or other traffic conditions through the rearview mirrors to make quick and accurate judgments and decisions. 3. When driving on multi-lane roads where frequent lane changes are necessary, always use the rearview mirrors to accurately observe the traffic conditions behind and to the sides. Avoid changing lanes if there is a vehicle approaching from behind.
Adjusting power mirrors is actually quite simple, and I've operated them this way on several cars I've driven. There's a control button near the driver's seat, usually square or with arrows. First, press it to select the left or right mirror—the illuminated light indicates which one is selected. Then use the directional pad to push up, down, left, or right, slowly adjusting to your preferred viewing angle. The key is to ensure you can see the rear wheel and vehicles behind you, eliminating blind spots for safety. I recommend adjusting while parked to avoid distractions while driving—once set properly, it can prevent many accidents. I once had a car with poorly adjusted mirrors and nearly hit the curb, so now I check them before long trips or seasonal changes. The advantage of power mirrors is the ease of adjustment—no need to push manually, especially convenient in winter. With a few tries, you'll get used to it.
Adjusting power rearview mirrors is primarily for driving safety, which I always pay attention to. The operation is quite intuitive: locate the small control panel on the door, first select the left or right indicator to activate it, then use the small arrow button to move the mirror up, down, left, or right. After proper adjustment, you should be able to see the complete outline of the car behind and the edge of the road to avoid blind spot accidents. I once noticed the mirror was misaligned on the highway and promptly pulled over to readjust. Power adjustment is much more convenient than manual, saving you the effort of reaching out. Also, remember not to do it in rainy or low-light conditions, as mistakes are more likely. For long-term use, regularly clean the control buttons to prevent dust buildup that could cause sluggish response—these small details can make your driving experience more secure. Safe driving starts with the details; properly adjusted mirrors provide a wider field of view and fewer accidents.
I figured out how to adjust the electric rearview mirrors when I was a beginner. The control knob is usually near the driver's door. First, press the left/right selector button to choose the target mirror, then use the directional buttons to move it. The up/down buttons adjust the height, while the left/right buttons adjust the angle. Adjust it until you can clearly see a bit of the rear tire and the traffic behind you. I recommend doing this when parked on flat ground rather than while driving—it's much safer and provides better visibility. At first, you might fumble with the buttons, but once you get used to it, it only takes a few seconds. The advantage of electric mirrors is their stability—they don't shake.
