How to Adjust Driving Modes in the New Passat?

1 Answers
StOwen
07/29/25 11:14pm
By controlling the torque range to regulate current output, it saves power. Without torque limitation, it offers better dynamic performance with slightly lower economy compared to EV+ECO mode. Focuses on fuel economy by optimally matching the motor and engine to keep the engine operating in highly efficient zones. The powertrain maintains maximum output state, delivering ample power with higher energy consumption than the previous three modes.
Was this review help?
20
4
Share
More Forum Discussions

Can a CVT Transmission Handle Steep Slopes?

CVT transmissions cannot handle steep slopes. The internal structure of a CVT transmission is relatively simple, consisting mainly of two cone pulleys and a steel belt or chain. The CVT transmission relies on the steel belt or chain for power transmission. When the vehicle is under heavy load, the friction between the chain during transmission increases. Due to the lack of a gear structure, the chain may slip or even break. Precautions for CVT Transmissions: 1. No Unauthorized Modifications: CVT transmission-equipped vehicles are prohibited from unauthorized modifications such as CNG (compressed natural gas) or LPG (liquefied petroleum gas) fuel systems. Since the operation of a CVT transmission is highly dependent on the engine's adaptation, unauthorized fuel modifications may lead to reduced or unstable engine torque, preventing the CVT transmission from achieving optimal performance. This can result in abnormal self-learning, clutch slippage, transmission warning lights, poor driving experience, belt slippage, and even transmission damage. Additionally, modified vehicles will not be covered under warranty. 2. Avoid Coasting in Neutral: Due to the different lubrication methods of automatic transmissions, coasting in neutral with low engine speed can cause the internal oil pump speed to mismatch the vehicle's speed, failing to meet the operational requirements. This can lead to excessively high transmission oil temperature, and in severe cases, may cause the vehicle to become immobile or shorten the transmission's lifespan.
20
1
Share

What Foods Should Not Be Consumed While Driving?

Precautions for eating while driving are as follows: 1. Avoid alcohol: Drivers should not consume alcohol or any items containing alcohol before driving, as drunk driving is considered illegal and poses safety hazards to other vehicles on the road. 2. Try to avoid taking medication: Foods that should not be consumed while driving include beverages with beer as an ingredient, lychees, etc. Additionally, it is best to avoid taking medication while driving, as most medications contain hormones that can cause drowsiness, leading to fatigue and lack of concentration while driving, which can create safety hazards and increase the risk of traffic accidents, endangering both the driver and others.
20
4
Share

Will a Motorcycle Get Damaged If Exposed to Rain?

Occasional exposure to rain will not cause damage, but frequent exposure should be avoided. Frequent rain exposure can cause the buttons in electrical components to rust, such as the horn switch, electric start switch, turn signal switch, and headlight switch, which will definitely have an impact. It is important to ensure that the exhaust pipe does not take in water, and the air intake must be protected even more. Below are the maintenance tips for motorcycles: 1. Timely Cleaning: Clean the motorcycle when it gets dirty or after being exposed to rain, as rainwater is acidic and highly corrosive to metal and plastic. 2. Engine Maintenance: At 6,000 kilometers on the odometer, which is during the normal driving phase when changing to the second bottle of semi-synthetic oil, add an anti-wear agent to extend the engine's lifespan and improve the motorcycle's performance. 3. Air Filter: For a high-performance motorcycle, the air filter is like the lungs of an athlete. Therefore, using a clean air filter is essential. If the air filter is damaged, dust and sand can enter the cylinder through the carburetor, wearing out the piston rings and valves. If it is clogged, it will cause poor air intake, incomplete combustion, reduced engine efficiency, insufficient power, and increased fuel consumption.
2
3
Share

How are blue-plate light trucks charged on highways?

Blue-plate light trucks have a basic highway toll rate of 0.090 yuan per ton-kilometer. Below is relevant information about highway tolls: 1. Passenger vehicles: 7 seats or fewer, trucks: under 2 tons. G1 Beijing-Harbin Expressway, G6 Beijing-Tibet Expressway, G7 Beijing-Urumqi Expressway, G45 Daqing-Guangzhou Expressway, G4501 Sixth Ring Road, G102 Tongzhou-Yanqing Expressway, G106 Beijing-Guangzhou Line, S15 Beijing-Tianjin Expressway, S36 Airport North Line, S46 Beijing-Pinggu Expressway. These highways charge 0.5 yuan per kilometer. 2. Trucks over 15 tons: G1 Beijing-Harbin Expressway, G6 Beijing-Tibet Expressway, G7 Beijing-Urumqi Expressway, G45 Daqing-Guangzhou Expressway, G4501 Sixth Ring Road, G102 Tongzhou-Yanqing Expressway, G106 Beijing-Guangzhou Line, S15 Beijing-Tianjin Expressway, S36 Airport North Line, S46 Beijing-Pinggu Expressway. These highways charge 2 yuan per kilometer. G2 Beijing-Shanghai Expressway charges 0.81 yuan per kilometer.
7
0
Share

Is it necessary to fasten the seat belt in Subject 2?

It is necessary to fasten the seat belt in Subject 2. During the Subject 2 exam, fastening the seat belt is a mandatory requirement. You should fasten the seat belt immediately after getting into the car. If you forget to fasten the seat belt before starting the engine, you will be directly deducted 100 points, resulting in a failing grade, and you will need to retake the exam. Below are the precautions for the Subject 2 exam: 1. Adjust your driving posture and seat position after getting into the car to ensure a comfortable sitting position; 2. Adjust the rearview mirror to ensure clear visibility without blind spots; 3. Fasten the seat belt correctly, paying attention to the direction to avoid buckling it incorrectly; 4. After completing all preparations, wait for the instruction to start the exam.
20
3
Share

Where Can China 5 Vehicles Be Registered?

On July 1, 2019, the China 6 emission standard was officially implemented in most regions across the country. Registration for China 5 vehicles ceased on the same day. However, the following regions still allow registration for China 5 vehicles: 1. Guangdong (excluding Guangzhou); 2. Jiangsu (excluding Nanjing); 3. Zhejiang (excluding Hangzhou); 4. Sichuan (excluding Chengdu); 5. Fujian; 6. Guangxi; 6. Ningxia; 7. Hunan; 8. Hubei; 9. Xinjiang; 10. Yunnan. It is important to note that policies in some regions may have changed, so it is advisable to consult the local vehicle management office before registration.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.