···
Log in / Register

How to Adjust Direction When Reversing into a Parking Space?

3 Answers
RyderLee
07/29/25 8:23am
From the mirror, observe the position of the rear wheel and the car body relative to the corner of the parking space, maintaining a distance of about 30CM. Use the rearview mirrors to monitor the distance between both sides of the car body and the parking space edges, adjusting the direction accordingly. After parking in the garage, listen for the voice prompt.
Was this review help?
2
3
Share
VanJayla
08/12/25 5:06am
I've been driving for over 20 years, and there's a simple method for adjusting direction when reversing into a parking space: look at the rearview mirror or backup camera, and if you notice the rear of the car veering to one side, slightly turn the steering wheel. For example, if the rear wheel is too close to a pillar, you should counter-steer a bit; if it's too far, adjust accordingly. Remember not to over-turn the steering wheel—keep the angle within 5-10 degrees to avoid losing control. Practice in an empty parking lot, trying different angles for parking, as practice makes perfect. Safety first—drive slowly, use the rearview mirror and audio alerts to avoid scraping walls or other vehicles. Staying calm is key when making adjustments; don’t panic, and you’ll handle it easily.
Was this review help?
15
4
Share
Expand All
StGavin
10/05/25 6:02am
When teaching beginners to drive, I often emphasize the correction method for reverse parking: first, check the rearview mirror to determine the deviation, then make slight adjustments to the steering wheel at a small angle. For example, turn left if the car is deviating to the right, and turn right if it's deviating to the left. Keep the angle within 15 degrees, as turning too sharply can easily lead to hitting the curb. Using a parking sensor or camera can be helpful. A safety tip is to keep the reversing speed below 5 kilometers per hour, leaving some space as a buffer. Practice repeatedly in a simulated parking area, noting common mistakes like oversteering, and provide timely feedback for correction. Remember to observe the tire tracks and reference points, and take it step by step to park steadily.
Was this review help?
8
5
Share
Expand All
More Forum Discussions

How Long Does a Dash Cam Battery Last?

Generally, the battery of a dash cam can last for one to two years without issues. Here is some relevant information: 1. Backup Power Source: The battery inside the dash cam serves as a backup power source. The dash cam primarily relies on the car's power supply. Typically, if the car's power is turned off, the dash cam will automatically shut down within a few minutes. 2. Battery Types: Dash cams usually come with two types of built-in batteries: lithium-ion batteries and lithium-polymer batteries. When exposed to high temperatures, both types can experience internal short circuits, separator melting, and chemical volatilization, making them flammable and explosive, which may lead to property damage for the user.
20
5
Share

Why is the dash cam showing a red light?

When a car dash cam shows a red light, it indicates that it is in normal recording mode, so car owners don't need to worry. Here is relevant information: 1. Dash cam: A dash cam is a device that records images, sounds, and related information during vehicle travel. After installation, it can record the entire driving process in video and audio, providing evidence for traffic accidents. 2. Components: It includes a microprocessor, data storage, real-time clock, display, lens module, operation keys, printer, data communication interface, and other devices. If the main unit does not include a display or printer, it should have corresponding data display and print output interfaces.
2
2
Share

Should the seatbelt be unfastened before turning off the engine in Subject 3?

In Subject 3, you should not unfasten the seatbelt before turning off the engine; instead, turn off the engine first and then unfasten the seatbelt. Below are the specific details about car seatbelts: 1. Precautions: Do not drive or ride in a car if the seatbelt is damaged, as it cannot provide adequate protection in a collision. When fastening or unfastening the seatbelt, ensure it is not twisted, as a twisted seatbelt cannot effectively absorb impact forces during a collision. 2. Function: The car seatbelt serves to restrain movement and provide cushioning, absorbing impact energy and mitigating inertia forces to prevent or reduce injuries to drivers and passengers.
3
5
Share

What happens if a car runs out of brake fluid?

Brake fluid, also known as hydraulic brake fluid or pressure oil, is the liquid medium that transmits braking pressure in a hydraulic braking system. It is used in vehicles equipped with hydraulic braking systems and is an indispensable component of the braking system. Within the braking system, it serves as a force transmission medium. Since liquids are incompressible, the pressure output from the master cylinder is directly transmitted to the wheel cylinders through the brake fluid. Here are the consequences of having no brake fluid: Safety issues: It severely affects the transmission response of the braking system, causing air to enter the brake lines, which can lead to brake failure or complete loss of braking, ultimately resulting in traffic accidents and safety hazards.
16
0
Share

Which gear is appropriate for automatic transmission at a red light?

For automatic transmission vehicles, when waiting at a red light, it is generally recommended to shift into the N gear, which is the neutral gear. Here is some relevant information: 1. Auto Hold function: However, if the vehicle is equipped with the ATUO-HOLD function (Auto Hold function), when the speed is 0, the vehicle will automatically apply the handbrake, so the driver does not need to perform any gear operation, and the vehicle will not move even if it is in the D gear. 2. Precautions: When the engine starts, the automatic transmission also has restrictions on the gear position. This is an adjustment made by the manufacturer for safety considerations. Generally, the engine can only be started when the gear lever is in the P or N position.
19
1
Share

What Are the Reasons Why a Car Key Won't Start the Engine?

It may be due to various reasons such as obstructed fuel flow, a dead battery, an empty fuel tank, incorrect gear position, etc. These issues can usually be resolved by oneself. However, other causes like improper fuel quality or excessive carbon buildup require professional attention at an auto repair shop. Below is a brief introduction about engine oil: 1. Function: Engine oil is crucial for the engine. It not only lubricates but also cleans, seals, buffers, prevents rust, and dissipates heat. During engine operation, the oil forms a protective film on the surfaces of various components, preventing direct contact and friction. 2. Precautions: Over time, engine oil loses its effectiveness, so it must be replaced regularly. Failure to do so can accelerate engine wear.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.