How to adjust and press down the headrest on the car seat?

1 Answers
Rick
07/29/25 9:53am
The method to adjust and press down the headrest on the car seat is: Sit in the car, lean back slightly, and use the adjustment button to align the softest part of the car headrest with the back of your head, level with your head. The position of the adjustment button for the car seat headrest varies depending on the car model, but it is generally located next to the two support rods of the headrest or on the side of the headrest. Press the button to adjust the height up and down. Headrests are mainly divided into two categories: non-adjustable and adjustable. Adjustable car headrests are further divided into manually adjustable and automatically adjustable types. Manually adjustable headrests can only be adjusted in one direction for height, while automatically adjustable headrests can be adjusted automatically in two dimensions.
Was this review help?
18
4
Share
More Forum Discussions

What car brands are from Germany?

German car brands include: Volkswagen, Audi, Scania, Lamborghini, Skoda, etc. Taking the Skoda Superb TSI280 as an example, it is a mid-sized 5-door 5-seater hatchback with body dimensions of: length 4869mm, width 1865mm, height 1489mm, and a wheelbase of 2841mm. The Skoda Superb TSI280 is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW and a maximum torque of 250 Nm. It is paired with a 7-speed dual-clutch transmission. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a multi-link independent suspension.
1
0
Share

How Long Can a Car Battery Last After Disconnecting the Negative Terminal?

Disconnecting the negative terminal of a car battery can allow it to last for one to two months, but it is not advisable to leave the car idle for an extended period. Prolonged inactivity not only affects the car battery but also has certain impacts on other components of the vehicle. For instance, if a car is left unused for too long, the tires may deform or even wear out prematurely, the engine oil may oxidize and deteriorate, and the paint may peel off. Disconnecting the negative terminal of the battery effectively cuts off most of the standby power consumption in the vehicle, allowing the battery to discharge naturally. When the natural discharge rate is very low, the car can remain idle for a relatively longer period with the negative terminal disconnected. Therefore, for some push-to-start models or older vehicles, disconnecting the negative terminal during long-term storage can better protect the battery.
2
3
Share

Does the Suzuki Beidouxing have an automatic transmission?

Suzuki Beidouxing does not have an automatic transmission, it only comes with a manual transmission, which relies entirely on the driver's control. Taking the 2019 Suzuki Beidouxing as an example, its body dimensions are: length 3400mm, width 1575mm, height 1705mm, wheelbase 2335mm, fuel tank capacity 42l, and luggage compartment capacity ranging from 633 to 1377l. The 2019 Suzuki Beidouxing is equipped with a 1.4l naturally aspirated engine, with a maximum power of 71kw and a maximum torque of 120nm, paired with a 5-speed manual transmission. It uses a MacPherson independent suspension for the front suspension type.
9
2
Share

What causes the drive shaft vibration in Haval H6?

The reasons for drive shaft vibration in Haval H6 are: 1. The drive shaft is bent and deformed, causing eccentricity; 2. The drive shaft loses balance; 3. The balance piece on the drive shaft falls off; 4. The spline teeth of the second shaft in the transmission cover and the internal spline in the drive shaft pipe are severely damaged. The body dimensions of Haval H6 are 4649mm in length, 1852mm in width, and 1710mm in height, with a wheelbase of 2680mm. Haval H6 is a compact SUV, equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The front suspension of Haval H6 uses MacPherson independent suspension, and the rear suspension uses double-wishbone independent suspension.
5
3
Share

Which Technologies in Lynk & Co are from Volvo?

Lynk & Co's CMA architecture technology is jointly developed by Geely and Volvo. The chassis and engines used in Lynk & Co vehicles are also products from Volvo, although the transmission is not from Volvo. Lynk & Co's model lineup includes the Lynk & Co 01, Lynk & Co 02, Lynk & Co 03, among others. The Lynk & Co 01 and Lynk & Co 02 are SUVs, while the Lynk & Co 03 is a compact sedan. The Lynk & Co 03 measures 4657 mm in length, 1840 mm in width, and 1460 mm in height, with a wheelbase of 2730 mm. The Lynk & Co 03 is equipped with three turbocharged engines: a low-power version 1.5-liter turbocharged engine, a high-power version 1.5-liter turbocharged engine, and a 2.0-liter turbocharged engine.
14
3
Share

How Many Stickers Should Be Affixed to a Motor Vehicle?

Motor vehicles should affix 3 stickers, which are: the Motor Vehicle Inspection Compliance Sticker, the Vehicle Environmental Protection Sticker, and the Compulsory Insurance Sticker. If the driver has held a license for less than one year, a probationary driver sticker must also be affixed to the rear of the vehicle. The annual inspection sticker serves as proof that the vehicle has passed inspection and should be affixed to the front windshield. If lost, the vehicle owner must bring all required documents to the Vehicle Management Office, Motor Vehicle Registration Service Station, or Traffic Police Brigade to apply for a replacement. The environmental protection sticker is a classification sticker issued by the state to indicate the vehicle's emission standards, categorized into yellow and green types. It is issued after reviewing the vehicle type and emission standards, aimed at facilitating energy-saving and emission-reduction inspections as well as regular environmental checks for vehicles.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.