How to Adjust a Motorcycle's Hydraulic Brake That Isn't Stopping Properly?

1 Answers
OViolet
07/24/25 2:44pm
If a motorcycle's hydraulic brake isn't stopping properly, you can fill the brake pump with brake fluid and bleed the air out. Brake fluid generally refers to hydraulic brake fluid. There are three types of brake fluid. When purchasing, choose a reliable manufacturer, and the higher the grade, the better. Its typical braking pressure is around 2MPa, with higher pressures reaching 4-5MPa. Common issues causing hydraulic brakes to fail include: 1. Brake Fluid: Insufficient brake fluid leads to inadequate pressure to push the brake pads. Check whether the brake fluid reservoir level is within the normal range. 2. Brake Pads: Excessive wear on the brake pads. When the pads wear down, the gap between the pads and the brake disc increases, leading to excessive free play in the brake system. Alternatively, newly replaced brake pads may not yet be fully bedded in with the brake disc. 3. Air in the System: Air bubbles in the brake fluid. Some riders experience reduced braking force after replacing the brake fluid—check if there is air trapped in the hydraulic lines.
Was this review help?
14
3
Share
More Forum Discussions

What documents are required for second-hand vehicle transfer?

The required documents are as follows: The original owner of the second-hand vehicle needs to provide documents including the registration certificate, vehicle license, and ID card. The buyer needs to provide an ID card, and if they are from another city, a residence permit or temporary residence permit is required. For companies or organizations, the original and photocopy of the organization code certificate and the official seal are needed. The original owner's commercial insurance can be canceled (compulsory insurance cannot be canceled), or the insurance can be transferred to the buyer at the insurance company. According to Article 19 of the "Motor Vehicle Registration Regulations," when applying for transfer registration, the current motor vehicle owner must fill out an application form, inspect the vehicle, and submit the following documents and proofs: Identity proof of the current motor vehicle owner. Proof and documents of motor vehicle ownership transfer. Motor vehicle registration certificate. Motor vehicle license. For motor vehicles under customs supervision, the "Customs Supervision Vehicle Deregistration Certificate" or a customs-approved transfer certificate must also be submitted. For motor vehicles that have exceeded the inspection validity period, a motor vehicle safety technical inspection certificate and a compulsory traffic accident liability insurance certificate must also be submitted. Precautions when buying a second-hand vehicle: Incomplete documents. Complete second-hand vehicle documents include: vehicle registration certificate (or original purchase invoice), vehicle license, vehicle purchase tax payment certificate, road maintenance fee documents, and compulsory insurance. Missing vehicle registration certificates, vehicle licenses, or unpaid compulsory insurance and road maintenance fees can cause endless trouble for the buyer. Tampering with the odometer. Most consumers judge a vehicle's condition by the odometer, and sellers often take advantage of this by tampering with it. The odometer is not just a record of usage intensity but also a log for the maintenance and replacement of other vehicle parts. If buyers follow the tampered odometer for maintenance, it can lead to a series of potential safety hazards. New paint covering "external injuries." When consumers buy a second-hand vehicle, if the car has been repainted and there are signs of repairs around the front, rear, and A, B, C pillars, the vehicle may have been involved in a major accident. "Tuning the heart" to raise the price. Many consumers focus too much on the car's "heart" (engine) and neglect the health of the car body. Second-hand car sellers take advantage of this by replacing engine parts to make the vehicle's "heart" appear younger, thereby inflating the price.
12
5
Share

How Long Does the Paint from a 4S Shop Last?

4S shop paint job longevity depends on paint quality and workmanship. With high-quality materials and proper application, the paint can typically last 4-5 years. Automotive paint thickness standards range between 120 to 180 microns, consisting of four layers: electrocoat primer, mid-coat, base color coat, and clear coat. Key functions of automotive paint include: 1. Protecting vehicles from atmospheric corrosion. 2. Enhancing vehicle aesthetics. 3. Identifying vehicle categories. 4. Improving comfort and sealing while reducing vibration noise.
7
3
Share

What Are the Signs of a Dead Car Battery?

Dimming vehicle lights, weak horn sound, and sluggish engine start are all signs of a dead car battery. Methods to deal with a dead car battery: 1. Jump-start: Since the vehicle itself is a platform that uses electricity while charging, a dead battery can be jump-started to recharge. After jump-starting, driving for two to three hours under normal conditions can restore the battery's charge. 2. Charger charging: For vehicles that have been parked for a long time, using a charger to restore the battery's charge is a good method. However, it's important to note that charger operation requires caution, as improper operation may damage the battery.
10
3
Share

Differences between Class C and Class F Refrigerated Trucks

The differences between Class C and Class F refrigerated trucks are as follows: 1. Temperature: Class C refers to refrigerated trucks where the average internal temperature is generally between 12°C and -20°C when the ambient temperature is 30°C. They are typically used for transporting vegetables and fruits, which require relatively precise temperature control, thus demanding considerable experience and skill from the operators. Class F refers to refrigerated trucks where the average internal temperature is generally below or equal to -20°C when the ambient temperature is 30°C. They are commonly used for transporting frozen meat, seafood, frozen foods, etc. These goods generally do not require strict temperature control as long as the temperature remains below -18°C.
15
2
Share

Are the Batteries Exchanged for Old Ones Refurbished Batteries?

Battery is refurbished. Here is the relevant content introduction: Battery refurbishment: Battery refurbishment has formed a complete industrial chain. After processes such as water replenishment, desulfurization, softening repair, opening the case to replace plates, capacity restoration, and polishing, a set of scrapped old batteries can be transformed into a set of brand-new batteries. Regular manufacturers: Generally, when purchasing batteries from regular manufacturers, the products are bought at the price of new ones, with a 15-month warranty period. If you buy refurbished batteries from small workshops, the quality is not guaranteed, and the service life is very short. The value of the exchanged old battery is about one-third of that of a new battery.
8
4
Share

Why was the Landwind X8 discontinued

The main reason for the discontinuation of the Landwind X8 is that the automaker failed to properly address consumer demands and rushed to expand product scale without continuous improvement in product quality. Here are the specific details: 1. Positioning: The Landwind X8 was positioned as a full-range urban SUV. 2. Exterior design: Breaking through the limitations of traditional SUV styles, it focused on inner strength rather than rugged appearance. The clean lines, composed stance, and balanced contours gave the Landwind X8 the fashionable appeal of an urban leisure SUV. 3. Space: In terms of space, the Landwind X8 had the largest body dimensions and wheelbase in its class, providing a spacious and comfortable interior comparable to that of an MPV.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.