How to Adjust a Motorcycle Digital Dashboard?

What is the ON button?

ON means on, and the OFF button means off. ON and OFF are two common buttons found in cars, typically seen on the light control lever, used to turn the car lights on or off. Besides ON and OFF buttons, cars also include SEL, OK, AC, VOL+, VOL-, MUTE, MODE, and SET. The AC button is the compressor button for the car's air conditioning, functioning as the cooling switch, used when operating the air conditioning in summer. VOL+ and VOL- refer to the volume control buttons in the car, which adjust the volume of the car audio. MUTE is the mute button in the car; pressing this button while playing music will instantly mute the sound.

5

0

Share

Which car does the Zotye T700 imitate?

Zotye T700 imitates the Land Rover. Its exterior features a wide grille with a dotted layout, LED headlights as standard across all models. The taillights of the Zotye T700 also use LED sources and are designed with high recognizability. The trunk is equipped with sensors, allowing it to be opened and closed by simply sweeping your foot left or right. The Zotye T700 has body dimensions of 4748mm in length, 1933mm in width, and 1697mm in height, with a wheelbase of 2850mm. It adopts a front-engine, front-wheel-drive layout, with MacPherson strut independent front suspension and multi-link independent rear suspension, built on a unibody structure.

7

2

Share

Under which brand does the Warrior belong?

The Warrior is a vehicle under the BAIC (Beijing Automotive Industry Holding Co.) brand, categorized as a rugged off-road vehicle. The entire lineup is equipped with a 1.5-liter turbocharged engine, delivering 136 horsepower and 200 Newton-meters of torque. The maximum power output is achieved between 2,000 and 4,400 RPM, while the peak torque is available from 2,000 to 4,500 RPM. This engine features multi-point electronic fuel injection technology and is paired with a 5-speed manual transmission. The Warrior utilizes leaf spring non-independent suspension for both front and rear axles and comes with a part-time four-wheel-drive system, employing a body-on-frame construction. The vehicle's dimensions are 4,080 mm in length, 1,828 mm in width, and 1,870 mm in height, with a wheelbase of 2,300 mm.

7

0

Share

What does the R gear mean when driving?

The R gear is the reverse gear. The car can only be shifted into the R gear after coming to a complete stop and pressing the brake pedal. P is the parking gear, specifically used when parking an automatic transmission vehicle. When shifted into P gear, there is no power transmission, and the locking mechanism inside the transmission locks the power output shaft, preventing the vehicle from moving. Forcing movement in this state can damage the transmission, so towing requires lifting the drive wheels off the ground. N is the neutral gear, functioning on the same principle as the neutral gear in a manual transmission, and is used for brief stops. D is the drive gear, also known as the forward gear, which is the gear used when driving. When shifted into this gear, the driver's task is to control the accelerator and brake pedals—pressing the accelerator to accelerate and the brake to decelerate.

9

2

Share

What does vehicle annual inspection mean?

Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and registration certificate. It is equivalent to conducting an annual physical examination for the vehicle in accordance with the technical requirements for the safe operation of motor vehicles, aiming to promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents. The inspection conducted for motor vehicles to apply for a license plate is called the initial annual inspection, the purpose of which is to verify whether the vehicle meets the conditions for applying for a license plate. The content of the annual inspection includes: 1. Checking whether the vehicle has a user manual and a certificate of conformity, and whether the factory sample marks on the vehicle body are complete; 2. Measuring the internal and external contour dimensions, wheelbase, and axle track of the motor vehicle; 3. Conducting the inspection item by item according to the technical inspection standards. After passing the inspection, the initial inspection change registration form for motor vehicles should be filled out, and the empty vehicle weight, loading capacity, number of passengers, and number of people in the driver's cabin should be recorded as specified by the manufacturer.

4

5

Share

What are the main causes of lead-acid battery plate sulfation?

Reasons for battery plate sulfation: 1. The electrolyte level in the battery is too low, exposing the upper part of the plates to air, causing severe oxidation of the negative plate; 2. Insufficient initial charging or frequent undercharging, and failure to perform regular charging; 3. The electrolyte density in the battery is too high, making it difficult for lead sulfate to dissolve; 4. Frequent over-discharge or deep discharge with small current in lead-acid batteries, leading to massive generation of lead sulfate that penetrates deep into the plates; 5. The battery remains in a semi-discharged or discharged state for extended periods; 6. Impure electrolyte containing excessive organic matter and impurities, which not only promote battery self-discharge but also constitute the primary cause of plate sulfation.

10

4

Share

How to Adjust a Motorcycle Digital Dashboard?

What is the ON button?

Which car does the Zotye T700 imitate?

Under which brand does the Warrior belong?

What does the R gear mean when driving?

What does vehicle annual inspection mean?

What are the main causes of lead-acid battery plate sulfation?

What does it mean when the new engine malfunction indicator light comes on?

What are the steps for parking a manual transmission car?

What are the causes of engine hot piston slap?

What does the TC indicator on a Buick mean?