How to Adjust a Car Three-Band Equalizer?

What is the minimum ground clearance of the Audi A6?

The minimum ground clearance of the Audi A6 is 117mm. Minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the level ground when the vehicle is fully loaded. Taking the 2020 Audi A6 as an example, it belongs to the mid-to-large-sized car category with the following body dimensions: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, fuel tank capacity 73 liters, and curb weight 1800kg. The 2020 Audi A6 features a five-link independent front suspension and a five-link independent rear suspension. It is equipped with a 2.0L turbocharged engine delivering maximum power of 190PS (140kW) and maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.

13

3

Share

Do You Need to Get a Score Report After Passing Subject One?

After completing Subject One, you can obtain your score report. The examination venue will uniformly print it, which includes the examinee's photo and test scores. The examinee then signs the report, and it is finally placed in the driving test archive folder. Below is an extended introduction about Subject One: Subject One Exam Content: Subject One refers to the driver's theory test, conducted at the Vehicle Management Office, which all license applicants must pass. The exam content includes the most basic knowledge such as driving theory fundamentals, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the driver's theory test is arranged independently by local Vehicle Management Offices. Subject One Exam Standards: The total duration of the Subject One exam is 45 minutes, consisting of 100 questions in the form of true/false and multiple-choice questions. The maximum score is 100, with a passing score of 90. The exam papers are randomly selected and combined by the computer driver examination system according to the proportion specified in the "Motor Vehicle Driver's License Work Regulations."

20

0

Share

What does it mean when Subject 2 application status changes from 'Under Review' to 'Applying'?

It refers to the appointment acceptance process. If you have already selected an examination venue but haven't received the result yet, the status will show as 'Applying'. If it remains 'Under Review' for too long, it might indicate an unsuccessful appointment, as some locations have high applicant volumes. If acceptance isn't confirmed after five working days, you'll need to make another appointment. A persistent 'Applying' status means your appointment hasn't been confirmed yet and is still being processed, requiring patient waiting. Tip 1: Try to schedule your appointment as early as possible within the system's available time slots for candidates. Tip 2: Avoid peak appointment periods by not selecting examination sessions marked as 'crowded'. Tip 3: Prioritize examination sessions with higher ranking in the appointment queue.

16

4

Share

How to Remove Adhesive from Car Windows?

Methods to remove adhesive from car windows include: 1. Apply vinegar to the adhesive with a cotton swab, wait for the vinegar to dissolve the adhesive, then wipe it off with a cloth; 2. Apply essential balm to the adhesive and scrape it off with a knife; 3. Evenly apply alcohol to the residual adhesive, let it soften, then wipe it clean; 4. Spray a specialized thermal insulation cleaner on the adhesive, which will melt it quickly, then wipe it off with a cloth. The functions of car windows are: 1. To shield from wind and rain, and reduce noise; 2. To lower wind resistance and improve airflow; 3. To protect the safety of passengers. Maintenance tips for car windows include: 1. Use specialized or suitable wiper blades and replace them timely; 2. Keep the windshield clean; 3. Use automotive-specific glass cleaner.

1

5

Share

How Long Does the Lifespan of Geely CVT Transmission Last?

The lifespan of Geely CVT transmission largely depends on the service life of the steel belt. The commonly used pressure steel belt is designed to last for 30 years or more. For a well-maintained CVT transmission, it can generally be used for 200,000 to 300,000 kilometers or about 15 to 20 years. Methods to extend the lifespan of the transmission are as follows: 1. Replace the transmission fluid according to the specified time or mileage. Although many manufacturers claim that the transmission requires no maintenance for life, the replacement cycle of transmission fluid is generally between 60,000 to 80,000 kilometers (varies by model). After the first maintenance, it is recommended to replace it every 40,000 to 60,000 kilometers to prevent the transmission fluid from deteriorating. 2. Do not keep the gear in D for a long time when not driving. Keeping the gear in D means the transmission is working, with internal parts rubbing against each other and stirring the fluid, which raises the temperature of the transmission. Over time, this can cause the transmission fluid to deteriorate prematurely, reducing its lubrication and cooling effects, thereby increasing wear on the transmission. 3. Pay attention to daily driving habits. The gear and speed should match; neither low gear at high speed nor high gear at low speed is advisable. Also, avoid coasting in neutral, as a vehicle without power not only interrupts the oil supply to the transmission but is also in a passive state, which is very dangerous. Do not shift into P gear before the car has completely stopped, as this can easily damage internal parts.

10

3

Share

How to Solve the Abnormal Noise in Classic Focus?

Common abnormal noises in Focus and their solutions are as follows: 1. Regarding the abnormal noise after cold start of Focus: After cold start, noise is generated in the engine area, the frequency of which is related to the engine speed. The noise basically disappears as the running time increases or the engine temperature rises. 2. Abnormal noise in the engine compartment after Focus starts: Most of the noise comes from the electronic power steering pump. Due to the design, the electronic power steering pump provides high oil pressure at low speeds and lower oil pressure above a certain speed. Therefore, the high-frequency noise of the steering pump is louder at idle, which is a normal phenomenon. 3. When the car is cold and idling, lifting the clutch pedal in neutral reveals noise, which disappears when the clutch is pressed. This may be caused by the gap between the spline sleeve on the clutch plate and the clutch plate's engagement position, or by the contact between the release bearing and the pressure plate. 4. Abnormal noise in Focus manual transmission cars when the clutch is half-engaged: After the friction surface of the clutch plate becomes smoother, the noise is caused by the vibration of the clutch plate during friction with the clutch pressure plate or flywheel.

3

5

Share

How to Adjust a Car Three-Band Equalizer?

What is the minimum ground clearance of the Audi A6?

Do You Need to Get a Score Report After Passing Subject One?

What does it mean when Subject 2 application status changes from 'Under Review' to 'Applying'?

How to Remove Adhesive from Car Windows?

How Long Does the Lifespan of Geely CVT Transmission Last?

How to Solve the Abnormal Noise in Classic Focus?

Why is there noise when the BMW wiper is working?

What is the tire model of the Baojun 530?

Three Sentences to Report to the Examiner in Subject Three?

What is the method for starting an automatic transmission car?