How to Add Windshield Washer Fluid to the Sylphy?
4 Answers
Sylphy adding windshield washer fluid requires opening the hood, locating the cap with a windshield and spray pattern, opening it, and filling it up. Generally, about 3 liters are needed. Functions of Windshield Washer Fluid: 1. Cleaning Performance: Windshield washer fluid is formulated with various surfactants and additives. Surfactants typically have wetting, penetrating, and solubilizing functions, thus aiding in cleaning and removing dirt. 2. Anti-freeze Performance: The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing anti-freeze properties and quickly dissolving frost. 3. Anti-fog Performance: A single-molecule protective layer forms on the glass surface. This protective film prevents the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear view. 4. Anti-static Performance: After cleaning with windshield washer fluid, substances adsorbed on the glass surface can eliminate static charges on the glass, providing anti-static properties. 5. Lubrication Performance: The ethylene glycol in the washer fluid has high viscosity, which can lubricate and reduce friction between the wiper and the glass, preventing scratches. 6. Anti-corrosion Performance: The washer fluid contains various corrosion inhibitors, which are completely safe and non-corrosive to all types of metals, car paint, and rubber.
The first time I added windshield washer fluid to my Sylphy, I was a bit nervous, but it turned out to be super easy. After opening the engine compartment, you can spot the blue cap with a windshield icon on the left side—it's highly recognizable. Gently twist off the cap (don't use excessive force to avoid damage), then slowly pour the bottled washer fluid until the level approaches the MAX line, making sure not to overfill. After pouring, remember to seal the cap tightly and close the hood—mission accomplished. I recommend using professional washer fluid; avoid tap water in summer as it can leave mineral deposits in the nozzles, clogging them and reducing wiper efficiency. In winter, switch to an antifreeze formula to prevent frozen pipes. I check the fluid level weekly to maintain clear visibility and drive with peace of mind. This whole process requires no tools and takes just a minute or two.
As a new car owner, I just bought a Sylphy and didn't know how to add windshield washer fluid, but after some exploration, I found it quite straightforward. Opening the engine hood is easy, and the filler port is located in the right corner inside, clearly marked with a small blue cap. Unscrew it and pour in the washer fluid, being careful not to spill it elsewhere—just align the bottle opening properly. After filling, securely close the cap. I once tried using regular bottled water, which clogged the nozzles and almost cost me a hefty repair bill. Since then, I only use certified windshield washer fluid, adding a bit of bactericide to prevent bacterial growth. Each operation takes just a few minutes, and after a couple of tries, even a beginner can get the hang of it. Making it a habit is beneficial for vehicle maintenance.
The steps to add windshield washer fluid to the Sylphy are simple: Open the engine hood, locate the filler port with the cleaning symbol on the left side, open the cap and pour the washer fluid up to the full line, then securely close the cap to finish. Be careful not to overfill and cause spillage—using a funnel can help. Only use professional fluid to avoid clogging the nozzles. In winter, use antifreeze-type fluid to protect the system safely.
