How to add windshield washer fluid to Changan Oshan X5?

What Causes a Truck to Lose Power When Accelerating?

Insufficient power and lack of acceleration when pressing the accelerator pedal can be caused by issues such as damaged spark plugs or clogged fuel lines. The best method for accelerating is to press the pedal smoothly and gradually. When rapid acceleration is needed, quickly pressing and releasing the pedal multiple times can achieve the optimal effect. The specific reasons for a car's lack of power and slow acceleration when pressing the accelerator are as follows: 1. Clutch Slipping: Insufficient friction in the clutch friction plate; shifting gears prematurely or disengaging before the clutch is fully engaged; prolonged driving with the clutch partially engaged or coasting with the clutch pressed; shifting or disengaging gears improperly, and applying sudden throttle when the gear is not fully engaged, leading to abnormal wear of the clutch plate. 2. Engine Issues: Power comes from fuel combustion, and the engine is responsible for supplying fuel and converting chemical energy into mechanical energy. Therefore, when the car lacks power and accelerates slowly, the engine system should be a key focus for inspection. 3. Engine Oil System: The importance of engine oil is undeniable—it ensures proper lubrication, reduces resonance, and enhances engine smoothness. Long-term oil deficiency can lead to reduced power and increased fuel consumption in mild cases, and in severe cases, piston knocking and mechanical damage to related components. Additionally, a faulty fuel pump or clogged fuel filter can also cause a drop in engine power. 4. Engine Air Intake System: Besides fuel, the engine requires air. If components like the air filter or throttle valve are clogged or malfunctioning, leading to insufficient air intake, the car may experience weak acceleration, slow speed increase, and jerking sensations.

4

1

Share

Can I still drive for a while with a tire pressure of 190 kPa?

A tire pressure of 192 kPa is not suitable for continued driving. Driving continuously with a tire pressure of 192 kPa will cause the steering wheel to sink and lead to veering, as well as increase fuel consumption. Moreover, continuing to drive with a tire pressure of 192 kPa will accelerate tire wear and shorten its lifespan. If driving at high speeds with a tire pressure of 192 kPa, the risk of a tire blowout significantly increases. Hazards of low tire pressure: Increased friction coefficient with the road surface, leading to higher fuel consumption; Causes the steering wheel to feel heavy and increases the likelihood of veering, posing safety risks; Increases movement in various parts of the tire, leading to excessive rolling and abnormal heat generation; Reduces the functionality of the cords and rubber, potentially causing delamination or cord breakage, and excessive friction with the rim, resulting in damage to the bead area and abnormal wear; Multiplies the friction between the tire and the ground, causing a sharp rise in tire temperature, softening the tire, and drastically reducing its strength. High-speed driving under these conditions may lead to a tire blowout; Increases tire body deformation, making the tire sidewalls prone to cracking and generating excessive flexing movement, leading to overheating, rubber aging, fatigue in the cord layers, and cord breakage. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders.

15

3

Share

What Are the Reasons for Abnormal Noise When Braking While Driving?

Driving when braking abnormal noise reasons are as follows: Brake pad break-in: Among them, the break-in of the brake pads is a very important part. Newly replaced brake pads also need to be broken in to better integrate with the old disc. Solution: Frequent driving for break-in. Debris ingress: While the vehicle is moving, many tiny sand particles enter between the pad and the disc, causing friction and abnormal noise. Solution: Flush the brake disc. Brake system malfunction: Missing or damaged fixing screws of the brake disc can also cause abnormal braking noise. Solution: Replace the brake disc, regular inspection and maintenance.

1

2

Share

What Causes the Humming Noise After Replacing the Front Wheel Bearing?

If there is still a humming noise after replacing the front wheel bearing, it may be due to improper installation of the front wheel bearing, excessive size of the shaft or sleeve supporting the bearing, or impurities inside the bearing. Below are some techniques to diagnose abnormal noises from wheel bearings: 1. Front wheel bearing issue: Simply lift the entire vehicle, accelerate the front wheels by applying throttle, and if the noise increases with speed, it indicates a bearing problem. If there is no noise, the issue is likely tire-related. 2. Rear wheel bearing issue: For vehicles that cannot be driven, try replacing the wheels with newer ones. If the noise persists, it's a bearing problem; if not, it's tire noise. 3. Bearing damage: If the wheels wobble and the vehicle shakes noticeably while driving, this is caused by bearing damage, and the abnormal noise originates from the bearing.

1

Share

What are the new regulations for out-of-town vehicle inspection in Chengdu?

Chengdu's new regulations for out-of-town vehicle inspection are as follows: Main content: For motorcycles registered within 6 years, they will be exempt from inspection to reduce the burden of vehicle inspection on the public. The owner of the motor vehicle can apply for the inspection compliance mark within three months before the expiration of the motor vehicle inspection validity period. Before applying, the owner of the motor vehicle should handle all traffic safety violations and accidents related to the vehicle. Legal basis: Article 49 of the "Motor Vehicle Registration Regulations" states that the owner of the motor vehicle can apply for the inspection compliance mark within three months before the expiration of the motor vehicle inspection validity period. Before applying, the owner of the motor vehicle should handle all traffic safety violations and accidents related to the vehicle.

19

0

Share

Is It Dangerous When the Light Is Off but Still Glows Slightly?

It is quite common for the light to still glow slightly when turned off. The reasons are as follows: 1. Capacitor step-down current limiting method: The driver of this LED light uses a very simple capacitor step-down current limiting method, rather than a dedicated and standard isolated switching constant current source; 2. Induced electricity: Although the switch is installed on the live wire, the neutral wire is only at 0 potential relative to the live wire and actually may still have a certain voltage, or induced electricity generated by other circuits. Combined with the high luminous efficiency of small-power LED lights; 3. Discharge causing flickering: After the power is turned off, the fluorescence or accumulated induced electricity discharges to a certain extent, resulting in flickering, which is understandable.

3

4

Share

How to add windshield washer fluid to Changan Oshan X5?

What Causes a Truck to Lose Power When Accelerating?

Can I still drive for a while with a tire pressure of 190 kPa?

What Are the Reasons for Abnormal Noise When Braking While Driving?

What Causes the Humming Noise After Replacing the Front Wheel Bearing?

What are the new regulations for out-of-town vehicle inspection in Chengdu?

Is It Dangerous When the Light Is Off but Still Glows Slightly?

Why Does the Wiper Shake?

What Components Make Up an Automotive Refrigeration System?

Can traffic violations be handled if the vehicle license is not under my name?

Can You Still Drive with Tire Pressure at 190?