How to Add Refrigeration Oil to a Car Air Conditioner?

1 Answers
Olive
07/30/25 6:17am
Car air conditioner refrigeration oil can be added by following these steps: 1. Open the car hood and locate the high and low-pressure pipes of the air conditioning system. 2. Check if the filling valve is qualified. 3. Connect the red and blue pipes of the air conditioning pressure gauge equipment to the high and low-pressure pipes of the air conditioner, and connect the yellow pipe to the vacuum oil extractor. 4. Close the vacuum machine and remove the high-pressure pipe. 5. Shake the bottle up and down before use and add an appropriate amount from the compressor channel. The car air conditioner, short for car air conditioning device, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to an optimal state. It provides passengers with a comfortable riding environment, reduces travel fatigue, creates good working conditions for the driver, and ensures driving safety.
Was this review help?
16
0
Share
More Forum Discussions

What does the 'stop' warning mean in a diesel vehicle?

Diesel vehicle displaying 'stop' is a mandatory parking alarm light. The main causes for this warning light include low engine oil pressure, insufficient brake fluid level, or excessive coolant temperature. In this condition, the engine must be shut down immediately. When a component in the vehicle malfunctions, the stop light on the dashboard will illuminate. If accompanied by other indicator lights, it indicates a specific component failure requiring prompt repair. Common dashboard warning lights include: tire pressure warning light, coolant temperature warning light, windshield washer fluid indicator, engine malfunction light, battery warning light, brake system warning light, door ajar warning light, seatbelt reminder light, ABS warning light, engine oil pressure warning light, and airbag system warning light.
15
5
Share

How to Install Current License Plate Screws?

The installation method for current license plate screws is as follows: 1. Locate the front and rear fixing points for the license plate on the car, especially identifying the four mounting points for the plate. 2. Align the license plate with these mounting points, ensuring it is straight and properly positioned. Hold it in place manually to prevent misalignment. 3. Insert the screw rods into the corresponding holes on the car's mounting points. Use a flat-head screwdriver to secure the screws, then repeat the process for the remaining three points, being careful not to overtighten. 4. Finally, check if the license plate is properly aligned, make minor adjustments if necessary, and then snap on all four screw caps in sequence.
11
3
Share

Where is the cabin air filter located in the Trumpchi GS5?

The cabin air filter of the Trumpchi GS5 is located behind the glove box on the passenger side. To replace the cabin air filter, you will need to remove the glove box. The Trumpchi GS5 is a mid-size SUV under the Trumpchi brand, equipped with a 1.5-liter turbocharged engine across all models. This engine has a maximum power output at 5000 rpm and a maximum torque range from 1450 to 4250 rpm. The engine features DCVVT technology and multi-point fuel injection, with an aluminum cylinder head and cast iron cylinder block. It is paired with a 6-speed manual transmission.
3
4
Share

Where is the oil filter located on the Mercedes-Benz B200?

The oil filter on the Mercedes-Benz B200 is located next to the right front shock absorber, at the front right of the engine. The function of the oil filter is to remove debris, gum, and moisture from the engine oil, delivering clean oil to various lubrication points. To reduce friction between moving parts in the engine and minimize wear, oil is continuously supplied to the friction surfaces of moving components, forming a lubricating film. Engine oil inherently contains a certain amount of gum, impurities, moisture, and additives. During engine operation, metal particles, airborne contaminants, and oil oxidation products further increase the impurities in the oil. If unfiltered oil directly enters the lubrication circuit, it carries these impurities into the friction surfaces of moving parts, accelerating wear and reducing the engine's lifespan.
14
5
Share

What to Do When the Car Chassis is Scratched by a Stone?

The solution when the car chassis is scratched by a stone is to stop immediately and inspect it, mainly checking whether the oil pan is broken, whether the tie rod is deformed, and whether the brake lines are broken or damaged, as these directly affect driving safety. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the overall shape of the car, receiving the power from the engine to make the car move and ensuring normal driving. To avoid damage caused by chassis scratches, you can apply an undercoating. Undercoating can effectively resist general minor impacts and scratches, protecting the chassis well, and can also cover exposed metal to form a protective layer, isolating it from external contact.
14
4
Share

How to Open the Front Hood of a Leiling?

The method to open the front hood of a Leiling: 1. Locate the hood release lever on the left side of the driver's compartment, near the steering wheel; 2. Pull the hood release lever, and the hood will pop up about 1cm; 3. Lift the hood with one hand while using the other hand to reach under the grille and find the release latch to fully open it. The method to close the Leiling hood is also very simple. It is best not to slam it shut. Instead, lower the hood and place both hands on the front edge, corresponding to the positions of the headlights, then press down gently. You don't need to use too much force—just listen for a click to confirm it's closed. Avoid pressing too hard on the central part of the hood, as it is made of aluminum alloy and excessive force may cause dents.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.