How to Add Engine Oil to a Sedan?
3 Answers
The method for adding engine oil to a sedan is as follows: The steps for changing the engine oil are: 1. Lift the car, remove the underbody panel, and place a container with a capacity of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain plug after draining and wipe it with a tissue to check for oil leaks; 3. Reinstall the underbody panel and lower the car, then use a funnel to align with the oil filler port to add engine oil. Engine oil serves the functions of lubricating and reducing friction, assisting in cooling, sealing to prevent leaks, and preventing rust and corrosion. The types of engine oil are: 1. Conventional mineral oil; 2. Semi-synthetic oil; 3. Fully synthetic oil.
I'm a car modification enthusiast and often tinker with my beloved vehicle. When adding engine oil, safety comes first: first, park and turn off the engine, then wait about ten minutes for it to cool down—don’t touch it when it's too hot to avoid burns or pressure issues. Pull out the dipstick, wipe it clean, reinsert it, and then pull it out again to check the oil level line. If it’s below the 'min' mark, it means you need to add oil. When opening the oil filler cap, unscrew it carefully and use a funnel to slowly pour in the same type of oil—the specification must match your vehicle’s manual. Don’t randomly switch viscosity or brands, as it can damage the engine. Add a little at a time, then pause to check the dipstick. Don’t pour it all in one go, as overfilling can cause abnormal oil pressure or allow oil to enter the cylinders, damaging engine components. After adding oil, I start the car and let it idle for a few minutes, then check the oil level again to ensure it’s stable. I also clean up any spilled oil to avoid corrosion on parts. Regular maintenance like this can prevent sudden oil shortages on the road and extend your car’s lifespan. By the way, don’t skimp on oil—synthetic oil is more durable and better suited for long trips.
As a new driver who just got my license, I'm most worried about manually damaging the car. Adding engine oil is actually very simple, don't be afraid. After parking and turning off the engine, wait a few minutes for it to cool down for safety. Pull out the dipstick, wipe it clean, reinsert it and pull it out again to check the level - if it's low, open the oil filler cap (usually marked with a twist symbol). When buying oil, check your car manual for the recommended type, don't just pick randomly. Use a funnel to pour it in, adding small amounts at a time - don't rush to empty the whole bottle at once to avoid messy overflow. After adding, I usually start the car and drive a few hundred meters, then check if the dipstick shows stable levels. Make it a habit to check oil levels monthly to prevent small issues from becoming major repairs, saving both money and hassle. If your car frequently runs low on oil, it might indicate aging seals - get it checked at a shop promptly. Keep a small funnel and paper towels in your beginner's toolkit for easier cleanup.
