How to Add Antifreeze and Windshield Washer Fluid to Volkswagen Lavida?

1 Answers
AubreeMarie
07/30/25 1:19am
Methods for adding antifreeze and windshield washer fluid to Volkswagen Lavida: 1. Open the cap of the antifreeze reservoir and directly add antifreeze until the liquid level reaches between the maximum and minimum scale lines; 2. The windshield washer fluid filler port is located under the blue cap on the right side of the engine compartment. Unscrew the cap, clean out the original washer fluid, and then add new washer fluid, being careful not to exceed the scale line. The Lavida is a sedan produced by Shanghai Volkswagen, which not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. In terms of body dimensions, the Lavida measures 4605mm in length, 1765mm in width, and 1460mm in height.
Was this review help?
5
4
Share
More Forum Discussions

What are the requirements for Ruqi Chuxing drivers?

Ruqi Chuxing driver requirements are as follows: License: Must possess a ride-hailing driver qualification certificate. Driving License: A C1 or above motor vehicle driving license with at least 3 years of driving experience. Criminal Record: No records of traffic crime, dangerous driving crime, drug abuse, drunk driving, or violent crime; no record of accumulating 12 penalty points within the last 3 consecutive scoring cycles. Residence Permit: For those without a ride-hailing driver certificate, must have Guangzhou household registration or a Guangzhou residence permit. Age: Must be below the national legal retirement age, with at least junior high school education, and in good health.
4
4
Share

How long after drinking two bottles of alcohol can you drive?

It is recommended not to drive after drinking alcohol. Due to the metabolism of alcohol, it is advised to refrain from driving after consuming alcohol for safety reasons. Always adhere to traffic rules and drive safely. After drinking, sufficient time must be allowed for the alcohol to be fully absorbed and metabolized in the body to avoid detection. For the sake of yourself and your family, never drive after drinking. It is essential to abstain from driving for a full 24 hours. Recommendation: Drinking warm water and consuming more fruits can effectively aid in excretion, thereby helping to quickly dilute the alcohol in the bloodstream. During this period, it is best to avoid consuming spicy or stimulating foods.
18
2
Share

How Many Years Until a Family Car Requires Biannual Inspections?

Cars over 15 years old require two inspections per year. Vehicles that fail to undergo annual inspections will be temporarily impounded. Below are relevant details: Expired inspection: Apply for the annual inspection decal at the DMV or traffic police station. Before going, ensure you have all required materials: the handler's driver's license, original and copy of compulsory traffic insurance (the copy will be filed by authorities). All materials must be originals. Vehicle inspection: Aims to examine core technical conditions, prompt maintenance improvements, ensure roadworthiness, and guarantee driving safety. Post-inspection: After passing all tests, pay fees, get the secondary license annotated, receive the inspection decal, and affix it to the top-right corner of the windshield.
12
5
Share

What Happens When Rear Wheels Lock Up?

When the front wheels lock up, the car can only move straight and cannot turn. When the rear wheels lock up, the car can still turn, but it is prone to drifting. Effect: If the front wheels lock up and skid first during driving, the vehicle will lose steering capability; if the rear wheels lock up and skid first, the car may slide sideways under slight lateral force; if both front and rear wheels lock up simultaneously, the vehicle will skid in a straight line. During driving, it is required that the front wheels lock up earlier than the rear wheels to prevent the vehicle from fishtailing. Brake: Wheel lock-up occurs when the brake (including disc and drum types) clamps the tire, causing no relative movement between the tire and the brake, resulting in the tire skidding relative to the ground.
2
1
Share

How to Add Transmission Fluid for Toyota Corolla?

When adding transmission fluid to a new Corolla, open the engine compartment, then remove the transmission dipstick and use a funnel to directly pour in the fluid. For the new Corolla, whether to change the transmission fluid can be determined based on the operating condition of the vehicle's transmission. If gear shifting feels rough, especially when the speed exceeds 100 km/h and the transmission noise becomes noticeably louder, it may be time to consider changing the transmission fluid. More details about transmission fluid are as follows: 1. Transmission fluid is a lubricant that keeps the transmission system clean, ensuring normal operation and extending the lifespan of the transmission components. Depending on the transmission type, transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid, typically red in color. 2. Over time, the viscosity of transmission fluid thins, leading to reduced lubrication, decreased sealing performance, increased resistance, and accelerated wear. This results in unstable pressure and affects the precision of the hydraulic system. The control and shifting precision of the transmission deteriorate, impacting smoothness and response speed. Deteriorated fluid also loses its cooling and anti-oxidation properties, making it prone to overheating issues, creating a vicious cycle that further shortens the lifespan of the fluid and transmission components. 3. Currently, there are three mainstream methods for changing automatic transmission fluid: The first method is similar to an oil change, where the transmission drain plug is loosened to drain and refill the fluid. The second involves removing the oil pan for draining and refilling. The third and more advanced method uses a circulation machine to replace the automatic transmission fluid.
5
4
Share

What is the bulb model for the Elantra?

The low beam bulb model for the Hyundai Elantra is H7, and the high beam bulb model is H11. Other bulb models can be found in the specific instruction manual. Car lights refer to the lamps on the vehicle, serving as tools for road illumination during nighttime driving and as signaling devices for various vehicle movements. Car lights are generally categorized into headlights, taillights, turn signals, etc. More details about the Hyundai Elantra are as follows: 1. In terms of appearance, only minor adjustments were made to the headlight assembly, with the LED daytime running lights changing from a C-shape to a more complex design, while the rear retains its original styling. 2. In terms of configuration, it comes standard with rear parking sensors, tire pressure monitoring, projector headlights, LED daytime running lights, frameless wipers, four power windows, and power-adjustable exterior rearview mirrors. 3. Additionally, safety features such as ESC (Electronic Stability Control), hill-start assist, emergency braking alerts, and front side airbags are standard across all models. Furthermore, the new car offers a choice of three styles of 16-inch and 17-inch wheels, with tire specifications of 205/55-R16 and 225/45-R17, respectively. 4. In terms of power, the new car will use a 1.4T and a 1.5L engine. The 1.4T engine delivers a maximum power of 95.6kW (130PS) and a peak torque of 211Nm, paired with a 7DCT transmission. The 1.5L engine offers a maximum power of 84.5kW (115PS) and a peak torque of 143.9Nm, matched with either a 6-speed manual or CVT transmission.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.