How to Add a Driving License Category?

1 Answers
VonParker
07/30/25 2:08am
To apply for adding a driving license category, you must meet the corresponding conditions at the vehicle management office. After passing all the required tests, you will obtain the additional driving qualification. Below is relevant information about driving license additions:1. Laws and Regulations: According to Article 40 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' first-time applicants for a motor vehicle driving license or those applying to add a permitted driving category must schedule the subject two test.2. Application Conditions: To upgrade from original permitted categories C1, C2, C3, or C4 to a B1 license, you need at least 3 years of driving experience and no full-point penalty records in the last two scoring cycles. To upgrade from B1 or B2 to an A2 license, at least 3 years of driving experience and no full-point penalty records in the last two scoring cycles are required. To upgrade from A1 to A2, at least 1 year of driving experience and no full-point penalty records in the last scoring cycle are necessary.
Was this review help?
13
3
Share
More Forum Discussions

What Causes Severe Jerking When Braking to a Stop?

Severe jerking when braking to a stop is mainly caused by excessively worn brake pads that need replacement. Here are methods to determine when to replace brake pads: 1. Judging by the wear condition of the brake pads: A new brake pad typically has a thickness of about 1.5cm, which gradually thins with continuous friction during use. When visual inspection shows the brake pad thickness has reduced to approximately 1/3 of its original thickness (about 0.5cm), the owner should increase self-inspection frequency and prepare for replacement. 2. Judging by sound: When the wear indicators on both sides of the brake pad are directly rubbing against the brake disc, it indicates the brake pads have exceeded their wear limit. If a hissing sound accompanies light braking, this means the brake pads must be replaced immediately.
14
5
Share

2019 Sagitar Brake Noise Issue?

The causes of brake noise in the 2019 Sagitar are as follows: 1. Break-in period for new cars, where brake pad bedding is a crucial part. It usually takes a few hundred kilometers of driving before the brakes feel smoother. 2. Brake noise may occur after driving through water, mainly due to loss of lubrication caused by driving through puddles on rainy days, leading to brake wear or possible rust from water exposure. 3. While driving, very small particles may get between the brake pads and rotors, sometimes causing noise due to friction. This usually doesn't require repair, as the particles will fall out during normal driving. 4. Excessively worn or too thin brake rotors may also produce noise. 5. Missing or damaged brake rotor mounting screws can cause brake noise. 6. Brake system malfunction, which requires inspection and repair.
17
2
Share

What is the reason for the high RPM of the Emgrand GL?

The reason for the high RPM of the Emgrand GL: There is a fault in the intake system, and it should be inspected and repaired at a 4S shop as soon as possible. More information about the Emgrand GL is as follows: 1. The Emgrand GL is equipped with a 3.5-inch TFT color screen trip computer, an 8-inch touch screen, as well as intelligent connectivity systems such as G-Netlink, G-Link, and CarPlay, along with technological features like GPS navigation and voice control. 2. Among the 10 standard features of the Emgrand GL, 6 are focused on comfort and convenience, including keyless entry with one-button start, a multifunction steering wheel, automatic climate control, one-touch up and down power windows with anti-pinch function for all four doors, rear USB charging ports, and a 4/6 split-folding rear seat backrest.
1
3
Share

How to deal with the abnormal noise from the sunroof of the 2013 Corolla?

The causes and solutions for the abnormal noise from the sunroof of the 2013 Corolla are as follows: 1. Insufficient lubrication of the sunroof slide rails: The noise may be due to poor lubrication in certain areas. Try applying some lubricating grease. 2. Dust accumulation in the sunroof tracks: Keeping the sunroof open for a long time can lead to dust accumulation on the slide rails. Cleaning them should eliminate the noise. 3. Loose screws in the sunroof: Long-term use may cause some parts or screws to loosen. Tightening the screws should stop the noise. 4. Aging of the rubber seal: The sunroof rubber seal, exposed to rain or sun for a long time, can age and produce noise when opening or closing. Rubber conditioner can temporarily restore the seal's performance. Open the sunroof fully and spray rubber conditioner on the seal to eliminate the noise.
10
0
Share

What does 100V on tires mean?

100 represents the tire load index, indicating a maximum load capacity of 800 kilograms. The letter V denotes the maximum speed rating, meaning the tire should not exceed 240 kilometers per hour. When selecting tires for your vehicle, it's crucial to choose the same specifications as the original tires to ensure proper operation of the motor vehicle. Here are the relevant details: 1. Load Index: The load index represents the maximum load capacity of a single tire in coded form. For example: A tire with a load index of 100 has a maximum load capacity of 800kg. This information is marked on the sidewall of every tire. 2. Tire Function: Vehicle tires are critical safety components that directly contact the road surface. They bear the vehicle's weight and work together with the suspension system to absorb shocks during driving. High-quality tires ensure good ride comfort and smooth driving performance, while maintaining excellent traction between the wheels and road surface.
4
5
Share

How Many Years Can a Fit Engine Last?

The lifespan of a Fit engine cannot be measured in years, but it can generally last around 300,000 kilometers. The maintenance methods for a Fit engine are as follows: 1. Use high-quality engine oil. Engine oil, also known as lubricating oil, serves to lubricate, clean, cool, seal, and reduce friction in the engine. Only by using qualified lubricating oil can the wear and tear of engine components be minimized, thereby extending the engine's service life. 2. Use qualified coolant. A car engine relies on the radiator to dissipate heat, and any issues with the radiator can cause fatal damage to the engine. It is essential to ensure that the coolant level in the radiator remains within the normal range. As part of regular maintenance, the antifreeze should be replaced every year. 3. Regularly clean the radiator scale. Rust and scale can restrict the flow of coolant in the cooling system, reducing its heat dissipation efficiency and leading to engine overheating or even damage. Therefore, during routine maintenance, it is important to choose a coolant with the appropriate ratio based on specific conditions. When adding coolant, ensure the level is between the maximum and minimum marks.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.