How to activate the windshield washer on the XT4?

3 Answers
MacSebastian
07/24/25 3:36pm
To activate the windshield washer on the XT4: 1. Pull the windshield wiper lever toward the driver to activate the windshield cleaning function; 2. The rear wiper button is located on the right side—manually rotate it to the corresponding position to activate the wiper; 3. Push the wiper lever toward the front of the vehicle to spray water until the desired cleaning effect is achieved, then release. The Cadillac XT4 is a compact luxury SUV from the Cadillac brand, with body dimensions of 4600 mm in length, 1881 mm in width, and 1627 mm in height, and a wheelbase of 2779 mm. The Cadillac XT4 features the Cadillac User Experience (CUE) with OTA smart cloud update functionality.
Was this review help?
18
4
Share
ElijahRose
08/10/25 7:27am
When driving the Cadillac XT4, the windshield washer function is very convenient to operate. Just pull the control lever on the right side of the steering wheel toward yourself, and the wipers will start sweeping the windshield while the washer nozzles spray cleaning fluid. The fluid is sprayed from several small holes under the hood to cover the glass and remove stains. It is recommended to regularly check the washer fluid level by opening the hood and refilling the reservoir with dedicated cleaning solution; otherwise, the system may fail to spray. In winter, use antifreeze washer fluid to prevent nozzle clogging due to freezing. If the spray performance is poor, the nozzles may be clogged with debris—gently clearing them with a fine needle can restore functionality. During rainy or dusty driving conditions, timely use of this function enhances visibility and ensures driving safety. You can also test this feature when parked to clean accumulated dust on the windshield.
Was this review help?
9
0
Share
Expand All
PrestonAnn
09/25/25 7:37am
Every time I use the windshield washer on my XT4, it's a breeze. There's a paddle on the right side of the steering wheel—just pull it gently toward yourself, and the wipers activate while water sprays onto the windshield. The spray pressure is just right, making it super effective at clearing off mud splatters. I usually make it a habit to check the windshield washer fluid reservoir under the hood, located at the front-left corner. Just pop open the cap and top it off with some store-bought cleaner to ensure there's always fluid ready. In winter, I switch to an antifreeze type to prevent freezing and malfunction. If fog or bird droppings obstruct my view while driving, a quick pull instantly restores clarity. Remember not to wait until the reservoir is empty before refilling—this helps extend the pump's lifespan and reduces repair needs. On rainy highways, this feature is a lifesaver, helping avoid the risk of poor visibility.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What is the correct method for starting a Roewe automatic transmission vehicle?

Turn the ignition key to the second position to power on, allowing the vehicle's computer system to initiate self-check. Depress the foot brake, shift the gear into D (Drive), and release the parking brake. Then smoothly lift the brake pedal, and after the vehicle starts moving slowly, gradually press the accelerator pedal. Start the vehicle.
3
2
Share

How to Use the Nissan Factory-installed Dash Cam?

Press and hold for 1-3 seconds to power off; short press after powering on to toggle WIFI on/off. Short press to lock the currently recorded video file and capture a screenshot of the current footage. Short press to start recording. Press and hold for 10 seconds to restore factory settings and format the TF card. Blue LED flashes once per second during recording.
8
5
Share

How to Issue an Invoice for One Vehicle One Ticket?

Open [Invoice Management/Invoice Issuance] in sequence, select 'Motor Vehicle Sales Unified Invoice Issuance', and enter the invoice issuance interface. Fill in the invoice information, verify that the information on the ticket is correct, and then click the 'Print' button in the upper right corner.
2
3
Share

How to Reset the Maintenance Light on a Leopard with One-Key Start?

Press and hold the SET button until the driving menu appears on the display, then select the 'Other Settings' option. The third item in the submenu is the maintenance mileage reset. Hold down both the SET and TRIP buttons simultaneously until the maintenance mileage reset option is highlighted. Wait for it to become adjustable, then press the SET button twice to complete the reset.
18
4
Share

How to Fix the Black Screen Issue on Roewe i5's Central Control?

When the central control screen does not light up, the first step is to check the battery—whether it is functioning normally and has sufficient power. If the central control battery is in good condition, restart the central control to see if it can boot up normally. If the issue persists after these steps, it is recommended to visit a 4S store for further inspection and repair.
1
5
Share

How to Reset the Service Wrench Light on Roewe 350?

Hold down the two arrow buttons and turn on the ignition switch. After about 3 seconds with the ignition switch on, release the two arrow buttons. At this point, the service menu will appear on the display, asking if you want to reset. Hold for more than 3 seconds; press the "mode" button. The service light will then be reset.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.