How to activate the windshield washer on the GLC260?

How to Repair a 12V Battery After It Runs Out of Power?

12V battery repair method after power loss: 1. Open the battery cover and remove the 6 safety caps; 2. Use a syringe to fill each hole with distilled water. If it's a 1.28 standard electrolyte, the plates may burn due to excessive acid concentration, and the acid in the battery will not evaporate. What's missing is water, so just add about 20 to 30ml of distilled water to each small hole; 3. After filling, let the battery sit for half an hour to allow the sponge around the plates to fully absorb the water, then use a resistor to discharge all the electricity from the battery; 4. After discharging, charge the battery. A pulse charging method can be used because it effectively removes plate sulfation and increases battery capacity; 5. After charging is complete, use a syringe to extract excess water from each hole; 6. Put the caps and cover back on, and the battery is ready for use in the vehicle.

2

4

Share

How many days does it take to replace a bumper at a 4S shop?

Replacing a car bumper at a 4S shop takes 3 to 4 days. The main function of the front and rear bumpers is to absorb external impact: The main function of the front and rear bumpers is to absorb external impact, effectively protecting the vehicle body and serving as a safety device for passengers. When vehicles were first introduced, bumpers were primarily made of metal. With the continuous development of the automotive industry, bumpers have been replaced with plastic materials, which serve to protect both the vehicle and pedestrians. Specific time for bumper replacement: Replacing a car bumper at a 4S shop takes 3 to 4 days. The process involves painting the bumper, which can be completed on the same day. However, it then requires 2 to 3 days for the paint to fully dry before the vehicle can be used normally. In winter, this period may be extended by 1 to 2 days.

1

Share

Is Automatic Transmission Subject 2 or Subject 3 Harder?

Subject 2 tests precision and basic skills, while Subject 3 tests procedures and flexibility. Many people think Subject 3 is harder because it involves driving on the road. However, in actual exams, Subject 2 tends to be more challenging. The reasons are as follows: 1. Challenges of Subject 2: Subject 2 has too many test items, and since it is the first time most people take the in-car test during the entire exam process, many feel nervous. Additionally, due to various reasons related to the test vehicle, visibility and handling are difficult to control, and the overall structure is unfamiliar. Especially when reversing into the parking space, it's easy to cross the solid line by accident. This tests the examinee's ability to adjust the seat height and rearview mirror angle properly before moving. 2. Subject 3 is about details determining success: Don’t resent the coach for being strict, because during the exam, you’ll find that listening to the coach is absolutely the right thing to do.

15

0

Share

Can the ETC be directly transferred to a new car when selling the old one?

If the new car owner did not change the license plate when purchasing the car, and the original car owner had already registered for ETC elsewhere, and the new car owner wants to re-register for ETC, then the previously linked ETC must be canceled for the ETC device to function properly. ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth is on." If inserting and removing twice without the electronic tag attached shows "Tag invalid," this is normal and does not affect activation. Alternatively, you can press the button on top of the electronic tag to enable Bluetooth. Turn on the phone's Bluetooth, open the corresponding mobile app (usually there is a download QR code on the electronic tag), and enter the device activation interface. Click on device connection and wait patiently for the "Connection successful" prompt. Once connected, upload a photo of the vehicle's front to complete activation.

14

0

Share

Does the Number of Passengers Include the Driver?

Does the Number of Passengers Include the Driver? The number of passengers includes the driver. Passenger transportation regulations stipulate: Sedans also fall under the category of passenger vehicles, so overloading a sedan will also result in penalties. The penalties for overloading a sedan are the same as for commercial passenger vehicles. According to the new traffic regulations, driving a commercial passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20%, or driving other passenger vehicles with passengers exceeding the approved capacity by more than 20%, will result in a 6-point penalty; driving a passenger vehicle other than a commercial passenger vehicle (excluding buses) or school bus with passengers exceeding the approved capacity by less than 20% will result in a 3-point penalty. Approved passenger capacity for sedans: Typically, the approved passenger capacity for a sedan is 5 people, but there may be instances of overloading.

19

2

Share

Why don't the brake lights come on when the headlights are on?

There are several reasons why the brake lights may not come on when the headlights are on: Brake light bulb failure: The most likely cause is a burnt-out brake light bulb, as these bulbs are used frequently. The owner can replace the brake light bulb with a new one. Alternatively, check for poor contact and adjust the bulb if necessary. Brake light switch: The owner can also check if the brake light switch is faulty, causing the brake lights not to work. By connecting the brake light switch with a wire, if the bulb lights up, it indicates the switch is damaged, and the owner can replace the brake light switch. Blown fuse: A blown fuse can also cause the brake lights not to work. However, some cars do not have a separate fuse for the brake lights but share it with other electrical devices. The owner can check for non-functioning electrical devices in the vehicle and replace the corresponding fuse.

17

0

Share

How to activate the windshield washer on the GLC260?

How to Repair a 12V Battery After It Runs Out of Power?

How many days does it take to replace a bumper at a 4S shop?

Is Automatic Transmission Subject 2 or Subject 3 Harder?

Can the ETC be directly transferred to a new car when selling the old one?

Does the Number of Passengers Include the Driver?

Why don't the brake lights come on when the headlights are on?

What does the maximum speed value indicate?

Can the Rear Wheel Fender Liner Be Removed?

Is the Lamando equipped with a dry dual-clutch transmission?

What Causes the Malfunction Light to Illuminate, Lack of Power When Accelerating, and Inability to Gain Speed?