How to activate the windshield washer on Baojun 310?
2 Answers
The steps to activate the windshield washer on Baojun 310 are: turn on the ignition switch, then pull the windshield wiper lever to spray water. The windshield wiper is a device used to remove raindrops and dust attached to the car's windshield, which can improve the driver's visibility and increase driving safety. Generally, cars have control buttons for the wiper with three settings: low speed, high speed, and intermittent. You can choose the appropriate setting according to the intensity of the rain. The Baojun 310 is a compact car under SAIC-GM-Wuling, with dimensions of 4032mm in length, 1680mm in width, and 1450mm in height, and a wheelbase of 2550mm. It features a MacPherson strut front suspension and a torsion beam rear suspension.
I've been driving the Baojun 310 for several years, and the windshield washer operation is quite simple. On the right-hand wiper stalk near the steering wheel, there's a small button or lever section usually marked with a water ripple icon. Gently pressing or pushing it forward sprays washer fluid directly onto the windshield while the wipers automatically swipe a few times to clear debris. I routinely check the washer fluid reservoir level under the hood (its cap is labeled "washer fluid") while driving. If no fluid sprays out, it's likely empty or the nozzle is clogged – just gently unclog it with a fine needle. Always use antifreeze washer fluid in winter to prevent line freeze damage. During bug-heavy summers, I clean the nozzles monthly. Operate washers cautiously at high speeds since atomized fluid may briefly obscure vision; I only activate them at low speeds or when stopped, ensuring clear visibility before moving. Avoid overusing to conserve fluid and protect the pump. During maintenance, inspect the entire washer system for leaks or wear.
