How to activate the windshield washer on a Mercedes-Benz C260?

2 Answers
MacValentina
07/24/25 9:00pm
Open the driver's side door and press the brake pedal. Press the one-touch start button to start the engine. The dashboard will light up, indicating that the engine is running. Press the windshield washer switch on the dashboard.
Was this review help?
15
3
Share
KalebFitz
08/11/25 11:20am
After driving the Mercedes C260 for so long, I've found the windshield washer operation super simple. There's a control stalk on the right side of the steering wheel - just gently pull it toward yourself (rearward) to activate the washer jets. The wipers will automatically engage to clean the windshield. This intuitive design offers single spray with a quick pull or continuous spray when held longer. I frequently use this feature during hot weather or when the windshield gets dirty to maintain clear visibility. Pro tip: Regularly check for clogged nozzles and refill washer fluid to ensure smooth operation. When I first got the car, it took me some time to figure this out, though the manual clearly explains the steps. It becomes second nature with practice. Remember to operate the stalk gently while driving for safety.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

How to Replace the Coolant in the Eado?

The method for replacing the coolant in the Eado is: 1. Open the car hood after the engine has cooled down; 2. Open the coolant reservoir cap; 3. Lift the vehicle and open the radiator drain plug, drain the old coolant, then reinstall the drain plug; 4. Lower the vehicle and pour new coolant into the reservoir. The Eado is a compact 4-door 5-seater sedan with body dimensions of 4730mm in length, 1820mm in width, 1505mm in height, and a wheelbase of 2700mm. It has a fuel tank capacity of 53 liters and is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 116 kW and a maximum torque of 260 Nm.
14
1
Share

Where is the airbag computer located in the Jaguar XFL?

Jaguar XFL's airbag computer is located on the vehicle floor panel directly beneath the center storage box. The Jaguar XFL is a mid-to-large-sized 4-door 5-seater sedan with the following body dimensions: length 5093mm, width 1880mm, height 1456mm, wheelbase 3100mm, and fuel tank capacity 74L. The Jaguar XFL is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 147 kW and a maximum torque of 320 N·m. It features a front-engine rear-wheel-drive layout, with double-wishbone independent front suspension and multi-link independent rear suspension.
13
3
Share

Does a new car need waxing?

New cars do not need waxing as they come with a protective wax layer on the paint. Waxing too early may remove the original wax on the new car's surface, causing unnecessary waste. The purpose of car waxing is to protect the paint and extend its lifespan. The benefits of car waxing include: 1. Excellent water resistance, preventing water droplets from corroding the paint or causing dark spots; 2. Reflecting light to prevent incident light from aging or discoloring the paint or base coat; 3. Isolating dust to prevent friction between dust and the car's metal surface, avoiding static electricity; 4. Protecting against UV rays, reducing damage to the paint; 5. Enhancing the brightness and shine of the car's paint.
13
4
Share

What does 2.0G mean for a car?

When a car is labeled with "2.0G," it indicates that the car has a displacement of 2.0 liters. Here is an extended introduction about car displacement: 1. Basic information: Most domestic cars have a model designation consisting of pinyin letters and Arabic numerals on the rear. This designation includes the following three parts: The first part consists of 2 or 3 pinyin letters, which serve as the code to identify the manufacturer. 2. Specific meaning: Car displacement refers to the volume of fluid inhaled or expelled per stroke or cycle. Car displacement is an important parameter for measuring a car. Additionally, some domestic cars do not have this type of model designation on the rear, but their displacement is usually indicated on the body or rear of the car.
4
1
Share

Where is the Bluetooth switch in the old Santana model?

The Bluetooth switch in the old Santana model is located in the car display applications. Here are the specific details about the Santana: 1. Configuration: The Santana series is equipped with RKA tire pressure monitoring devices as standard, along with safety features such as ESP body dynamic electronic stability system, HBA emergency braking assist system, and ASR traction control system. 2. Power: It is powered by a 1.5L naturally aspirated engine. The National V version has a maximum power of 81kW (110PS) and a peak torque of 150N·m, while the National VI version offers a maximum power of 82kW (111PS) and a peak torque of 145N·m. It is paired with either a 5-speed manual or 6-speed automatic transmission.
11
1
Share

When reversing, do you turn the steering wheel in the direction you want to go?

When reversing, you turn the steering wheel in the direction you want to go. Here are specific details about reversing methods: 1. Find a reference point: You can observe the parallel relationship between the car body and the lane line in the rearview mirror, or maintain a certain distance from the lane line while driving. 2. Steering control: While driving, the vehicle has a self-centering force. Once a certain speed is reached, as long as the vehicle's steering parameters are accurate, the car can automatically drive straight, and you only need to hold the steering wheel lightly with both hands. 3. Use the reversing camera: Most vehicles nowadays are equipped with reversing radar and a reversing camera. You can use the reversing camera to assist in reversing, which reduces the difficulty of losing direction while reversing.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.