How to Activate the Windshield Washer Function
3 Answers
The steps to activate the windshield washer mode are as follows: 1. It cannot be operated from outside the vehicle; first, open the car door. 2. After opening the door, sit in the driver's seat. 3. On the right side of the steering wheel, you will find a lever-like control, which is the windshield wiper control lever. 4. On the right side of the multifunction steering wheel, you can see the wiper switch. Pull the lever inward, and the wiper will spray windshield washer fluid. Common mistakes when using wipers: 1. A major no-no is dry wiping or using the wipers to remove dust from the windshield on sunny days without spraying washer fluid. Always spray washer fluid before wiping away dust or insects from the windshield. 2. For stubborn or hard stains on the glass, manually clean them first to avoid damaging the rubber blade, which could lead to ineffective wiping or damage to the wiper. 3. If there is a lot of sand on the glass, use a cloth to remove it if possible, as sand particles act like sandpaper on the wiper rubber, causing severe damage to the wiper and potentially scratching the glass.
Using the windshield wiper washer is actually quite simple. Just pull the wiper control stalk next to the steering wheel toward the driver. Hold it down without releasing, and the washer fluid will spray while the wipers make a few sweeps. I learned this when I first started driving—it's pretty straightforward. Remember to check if there's enough washer fluid; sometimes it won't spray if the reservoir is empty, so just top it up with cleaning solution. Additionally, the nozzle direction can be fine-tuned—if the spray is too high or too low, gently adjust it with a needle. When your vision is blurred while driving, always spray and wipe first, especially in rain or when there's bug splatter—safety comes first. For maintenance, check the washer fluid reservoir every two to three months. If it's dirty, it can clog the pipes, so use a dedicated wiper cleaning solution to avoid freezing and damaging the pump in winter. In short, the operation is easy—just one pull does the trick.
I often drive, and to activate the windshield washer, I simply pull the wiper control lever toward me and hold it for a few seconds. This sprays water onto the windshield, and the wipers automatically start cleaning. Just a heads-up, there might be slight differences between car models: some have a separate button on the lever that you can press to activate the washer. If the spray becomes weak over time, it’s likely due to clogged nozzles—clearing them with a fine toothpick usually fixes the issue. Don’t forget to regularly top up the washer fluid; it helps remove grease in summer and prevents freezing in winter. Avoid pulling the lever unnecessarily to prevent premature wear on the pump. This feature is incredibly useful during rain or fog, ensuring driving safety.
