How to activate the ventilation function in Volkswagen CC seats?

1 Answers
Jameson
07/30/25 2:09am
The older models of Volkswagen CC have a switch with a fan symbol under the seat. Pressing this switch activates the seat ventilation function. In the newer models of Volkswagen CC, the seat ventilation function is integrated with the air conditioning system. Simply turning on the air conditioning automatically activates the seat ventilation. Seat ventilation refers to the process where, with the air conditioning on, fans inject air into the seats, which then escapes through small holes on the seat surface to achieve ventilation. The Volkswagen CC combines the stability of a sedan with the agility of a sports car, featuring a 4-door frameless design and a sporty interior. It continues the style of Volkswagen's business sedan series, equipped with leather sports seats and a leather smart sports steering wheel.
Was this review help?
4
1
Share
More Forum Discussions

How to set up the dashboard of Changan CS35 Plus?

The meter can display the total accumulated mileage and the single trip mileage. The meter will only work when the ignition is turned on. Press the menu button once to enter the hour adjustment mode. Use the reset/adjust button 9 to adjust the hours, each press of the button. Turn off the ignition, hold down the reset/adjust button. Turn on the ignition, then release the button. Press the button, and the service interval indicator will be reset to zero.
18
2
Share

What is the solution for soft brakes on the BAIC Huansu S3?

It is necessary to check whether the brake pads and brake discs are excessively worn and whether the brake fluid needs to be replaced. After inspection, perform the corresponding replacements. Brake pads or brake discs should be replaced promptly. Additionally, it is essential to check for internal leaks in the brake master cylinder and wheel cylinders.
10
1
Share

Can a new car with over 1,000 kilometers drive on the highway?

A new car that has been run-in for 1,000 kilometers can drive on the highway, but the speed should not exceed 100 km/h. Break-in period for a new car: The initial stage is 0 to 500 km, with the speed maintained at 60 to 70 km/h; the middle stage is 500 to 1,000 km, where the speed can be increased to 90 to 100 km/h; the later stage is 1,000 to 2,000 km, where the speed can be increased to below 120 km/h. During the entire break-in period, it is necessary to control the speed and RPM, avoid aggressive driving, sudden acceleration, hard braking, and sharp steering. Precautions for driving on the highway: When driving on the highway, maintain a safe distance from the vehicle in front. At speeds above 100 km/h, keep a distance of at least 100 meters. There are distance confirmation markers on the highway to help gauge the distance. Stay away from trucks; when driving at high speeds, do not drive side by side with trucks or follow closely behind them—try to overtake them instead. Stay in the middle lane; the leftmost lane on the highway is typically the overtaking lane, while large trucks usually stay in the rightmost lane.
2
0
Share

How to Adjust the Steering Wheel of Beijing Hyundai?

Steering wheel adopts mechanical adjustment method, which can be adjusted telescopically in the front and rear directions as well as up and down. Sometimes the lock release lever does not lock the steering wheel, which is not a malfunction. Pull down the lock release lever on the steering column to adjust the angle and position of the steering wheel. Move the steering wheel towards the driver's chest rather than the face.
2
0
Share

Which Province Has Canceled Gear Shifting?

Guangdong Province has canceled gear shifting. Benefits of canceling gear shifting: For students who are not very proficient in gear shifting, canceling it is a blessing. They no longer have to worry about failing due to shifting into the wrong gear. The gear shifting test not only requires correct gear selection but also matching speeds. For example, shifting into fourth gear at 20 km/h would still result in failure. After canceling gear shifting, if the speed does not match, the maximum penalty is a deduction of 10 points, and the test is still considered passed. Correct techniques for gear shifting in Subject 3: Upshifting: Start by pressing the clutch, shift into 1st gear, engage the half-clutch and accelerate. When the speed reaches around 15 km/h, release the throttle, press the clutch, and shift into 2nd gear. Release the clutch and accelerate. When the speed reaches around 25 km/h, release the throttle, press the clutch, and shift into 3rd gear. Release the clutch and accelerate. Downshifting: Press the brake to reduce speed below 20 km/h, release the brake, press the clutch, and shift into 2nd gear. Continue braking to reduce speed below 10 km/h, release the brake, press the clutch, and shift into 1st gear.
15
2
Share

How to Properly Start a Mondeo Automatic Transmission Car?

After the driver sits in the driver's seat, press the start button once, then press it again; at this point, the vehicle performs a self-check. Depress the brake pedal and press the start button once more to ignite and start the engine. Release the foot brake; you may choose to warm up the car in place. Shift to D gear and release the handbrake. Slowly release the foot brake to start; after starting, you should quickly enter the road and drive at the prescribed speed.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.