How to Activate the Tire Pressure Monitoring in the Bora?
3 Answers
The tire pressure monitoring system in the Bora is located inside the tires, which contain sensors. The monitoring button is positioned on the multifunction steering wheel. The Volkswagen Bora is equipped with a tire pressure warning system. When the pressure in one or more tires is significantly lower than the set pressure or if there is a structural issue with the tire, the system emits a warning sound, and the instrument cluster display may show a corresponding text message. However, specific tire pressure values are not displayed. Additional information about the tire pressure monitoring system is as follows: 1. The tire pressure monitoring system automatically and continuously monitors the tire pressure while the vehicle is in motion, alerting the driver to leaks or low pressure. It is an active safety device that warns the driver of potential tire hazards, prompting them to take appropriate action. 2. There are two main types of tire pressure monitoring systems: indirect and direct.
Last year I bought a Bora, and recently I was figuring out how to turn on the tire pressure monitoring. After starting the engine, sit tight and you'll see a menu button on the right-hand side of the steering wheel (if there's no multifunction button, look for the physical button below the instrument panel). Press it to enter the interface, use the left and right buttons to scroll to an option resembling a tire symbol, then confirm to enter the tire pressure settings. Here, select 'Activate' or 'Calibrate,' and the system will prompt you that it's turned on but needs you to drive a couple hundred meters to record the normal parameters. Once done, the warning light will come on if the tire pressure is low, reminding you not to overlook it. I found this feature saves fuel and enhances safety, especially in winter when tire pressure fluctuates—just set it once and it works. I always turn on this monitoring for long trips to avoid the risk of a blowout—it really works.
As a long-time Bora owner, activating the tire pressure monitoring is straightforward: First, start the engine and keep the car stationary. Look for the settings button on the steering wheel or dashboard area, press the MENU button to enter the vehicle menu. Use the directional keys to find the tire pressure monitoring option, usually indicated by a tire icon or text, then press the SET button to confirm activation. The dashboard will display a prompt message. However, remember that after activation, you need to drive for a few minutes to allow the system to automatically calibrate and save the data. After that, the monitoring will be operational, and it will alert you promptly if there's any abnormal tire pressure. I recommend checking the actual tire pressure monthly to ensure it's around 2.5 Bar for accuracy. This habit has helped me avoid skidding several times in rainy conditions.
