How to Activate the Remote Start Feature on Hongqi Vehicles?

1 Answers
VonMakayla
07/29/25 7:16pm
Press and hold the start button on the key fob for more than five seconds to remotely start the vehicle. Advantages: 1. High reliability: Since the remote start mechanism for the engine or electric motor shares identical structural components with manual ignition, it eliminates mechanical wear issues associated with heaters, significantly reducing failure rates. 2. User-friendly operation: Although remote engine/motor start cannot be scheduled like parking heaters, the key fob activation remains extremely convenient. The typical operating range exceeds 50 meters, allowing drivers to pre-start the engine/motor from home or office when the vehicle is parked in ground-level lots.
Was this review help?
8
3
Share
More Forum Discussions

Can I still drive if I don't have enough points on my license?

You can continue driving as long as your license has not accumulated 12 penalty points. If you reach 12 points, you cannot drive. Article 58 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" stipulates that if a motor vehicle driver accumulates 12 penalty points within one scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driving license. If you accumulate 12 or more penalty points within one scoring cycle, the motor vehicle driver must attend a seven-day full-point training course within 15 days. After completing the training, you must take the subject one exam. If you pass the exam, the penalty points will be cleared, and your motor vehicle driving license will be returned. If you accumulate 12 points or more twice within one scoring cycle, or if you accumulate 24 or more penalty points, the driver must not only pass the subject one exam but also take the subject three exam within ten days after passing the subject one exam. If you pass the subject three exam, the penalty points will be cleared, and your motor vehicle driving license will be returned.
18
0
Share

Does Pressing the Clutch Before Braking Affect the Car?

Pressing the clutch before braking is a major mistake, especially in emergency situations, as it increases the risk. More related details are as follows: 1. Correct Operation Method: First, press the brake to slow down the vehicle, then press the clutch to quickly shift gears. The first two steps should not be reversed. Pressing the brake first is to prevent the vehicle from slowing down too much. Remember not to press the brake all the way at once, as this may cause the engine to stall. 2. Proper Use of Brakes: There are numerous accidents on highways caused by incorrect braking methods leading to vehicle rollovers. Therefore, it's essential to use the brakes properly and make accurate judgments. At low speeds, you can directly press the clutch, while at high speeds, pressing the brake serves two purposes: first, to slow down the vehicle, and second, to reduce the engine speed. Pressing the clutch at high engine speeds can damage the clutch plate. Braking is one of the important ways to demonstrate driving skills.
2
1
Share

What Causes the Squealing Sound When Braking a Car?

There are several reasons why a car may produce a squealing sound when braking: 1. Use of low-quality or overly hard brake pads. If inferior or excessively hard brake pads are used, they can create a squealing noise when rubbing against the brake disc during braking. Therefore, it is essential to use high-quality brake pads when replacing them. 2. Presence of sand or foreign objects between the brake pad and brake disc. During normal driving, it is inevitable to encounter complex road conditions. Due to the unique design of disc brakes, sand and foreign objects can sometimes get lodged between the brake pad and brake disc, leading to unusual noises during braking. 3. Severe wear of the brake disc. Using low-quality brake pads or having hard foreign objects trapped between the brake pad and brake disc can cause abnormal wear on the brake disc. If the brake disc becomes excessively worn, it will also produce a squealing sound when braking. 4. Brake pad warning. Many people are unaware of when to replace brake pads. There is no strict mileage requirement for replacement; they should be replaced once they become thin. Some brake pads come with electronic warnings, while lower-end vehicles may use warning indicators. If the wear on the brake pads reaches the warning threshold, a squealing alert sound will be emitted, indicating that the pads need to be replaced promptly.
7
1
Share

What are the reasons for Audi's excessive oil consumption?

Specific reasons are as follows: 1. German cars have a different cylinder processing technology compared to other brands: their engine cylinder walls appear as a honeycomb structure under a microscope, with each tiny pore containing a small amount of oil. This design provides better lubrication for the piston's up-and-down movement within the cylinder compared to flat cylinder walls, minimizing wear between the piston rings and cylinder walls. The honeycomb structure retains more oil than flat cylinder walls, leading to higher oil consumption. 2. German cars have piston rings with excellent toughness but slightly lower tension compared to Japanese cars: this configuration naturally reduces wear on the cylinder walls caused by the piston rings' movement. As a result, German cars show significantly less cylinder wall wear even after hundreds of thousands of kilometers compared to Japanese and Korean cars, maintaining good engine condition. To ensure minimal wear, the gap between the piston and cylinder is slightly larger than in other brands. 3. German cars have higher engine compression ratios: as German cars pursue high power output, their compression ratios are higher than those of Japanese and Korean cars. Higher compression ratios inevitably result in higher temperatures inside the engine cylinders, which causes engine oil to be consumed more quickly. This phenomenon is particularly prominent in turbocharged engines.
17
0
Share

At What Age Can Chinese Citizens Obtain a Driver's License?

The minimum age requirement for Chinese citizens to obtain a driver's license is 18 years old, which must be the legal age of 18. Applicants for a motor vehicle driver's license must meet the following age conditions: 1. For applying for small car C1, small automatic transmission car C2, small automatic transmission passenger car for the disabled C5, or light motorcycle F, the applicant must be between 18 and 70 years old. 2. For applying for low-speed truck C3, three-wheeled car C4, ordinary three-wheeled motorcycle D, ordinary two-wheeled motorcycle E, or wheeled self-propelled machinery M, the applicant must be between 18 and 60 years old. 3. For applying for city bus A3, large truck B2, trolleybus N, or tram P, the applicant must be between 20 and 50 years old. 4. For applying for medium-sized passenger car B1, the applicant must be between 21 and 50 years old. 5. For applying for tractor A2, the applicant must be between 24 and 50 years old. 6. For applying for large passenger car A1, the applicant must be between 26 and 50 years old. 7. Students receiving full-time driving vocational education who apply for large passenger cars or tractors must be between 20 and 50 years old.
10
4
Share

What Are the Reasons for Wipers Not Cleaning Properly?

Wipers not cleaning properly may be due to two reasons: foreign objects between the wiper and the windshield, and wear of the wiper rubber blade. If there are foreign objects between the wiper and the windshield, the wiper will rub and produce abnormal noise when moving back and forth, and the wiper blade area may not be cleaned properly. There may be many fine sand particles on the wiper rubber blade. Wiping water with these fine sand particles is equivalent to using a grinding wheel on the wiper rubber blade, which will cause damage over time, reducing smoothness. As a result, the rough rubber blade cannot clean rainwater properly. Additionally, the wiper blade is usually made of rubber, and prolonged use can cause it to harden. Solutions for wipers not cleaning properly: When the owner finds that the wipers are not cleaning rainwater properly and the wipers emit a sharp noise, they should first check if there are any foreign objects on the wiper blade. If foreign objects are found, they should be promptly removed. If the wiper rubber blade has aged and causes the wiper to not clean properly, it is necessary to replace the wiper rubber blade with a new one in time.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.