···
Log in / Register

How to activate the rearview mirror heating in XTS?

4 Answers
DominicAnn
07/29/25 11:44am
Method to activate the rearview mirror heating in XTS: The rearview mirror heating function in XTS is linked with the rear windshield heating function. When the rear windshield heating is turned on, the rearview mirror heating will also activate and automatically turn off once a certain temperature is reached. The Cadillac XTS is a mid-to-large-size sedan with body dimensions of 5131mm in length, 1852mm in width, and 1501mm in height, and a wheelbase of 2837mm. In terms of interior, the Cadillac XTS continues the brand's tradition of high-quality materials, featuring extensive use of genuine leather on the dashboard, door panels, and steering wheel, complemented by real wood accents. Chrome trim is applied to areas such as the air vents, door handles, and seat backs, enhancing the overall visual premium feel of the vehicle.
Was this review help?
6
1
Share
VanAthena
08/13/25 8:24pm
I have extensive experience with this - I've driven my XTS for over five years and am very familiar with the rearview mirror heating function. Simply locate the button with a square and wavy lines symbol in the center console's AC control area - the icon looks like a windshield emitting heat. Press it and the feature will activate along with rear window defogging, operating automatically for 15-20 minutes. Important reminder: it only activates when temperatures drop below 4°C, so don't worry if it doesn't respond in summer. I once encountered a malfunction that turned out to be a blown fuse - the corresponding fuse is located in the fuse box behind the glove compartment on the passenger side. During rainy or foggy conditions, activate it right after starting the car. Wait about two minutes and the mirrors will clear up - much safer than wiping with a towel, especially highly practical on highways.
Was this review help?
1
3
Share
Expand All
AmaraLee
10/08/25 6:14am
The operation is extremely simple, just three steps: Get in the car and start the engine, locate the square button labeled REAR DEFOG in the air conditioning area of the center console (with a wavy line or heat symbol icon), then press it directly and check that the indicator light turns on. This function automatically turns off, so no further action is needed. Note two points: It only works when the outside temperature is below 35°F—don't force it on sunny days as it won't function; it's tied to the rear window defroster, so there's only one button. If there's no response, first check the F33 fuse located in the fuse box behind the glove compartment. It's most effective to use after washing the car or during frost—no need to constantly wipe the mirrors while driving, and it greatly improves visibility.
Was this review help?
12
5
Share
Expand All
LeElliott
11/21/25 7:33am
I picked up my XTS last year and also spent some time looking for the function button back then. It's located below the center console on the air conditioning panel - look for the small square icon with wavy lines. The button might also be labeled 'REAR'. Just press it to activate after starting the engine. It only works at low temperatures and shows the most noticeable effect on rainy or cold days. The first time I used it, I noticed it takes a few minutes to start heating up - don't worry about that. This feature heats both the rear window and mirrors simultaneously, and automatically turns off when you lock the car. Whenever your mirrors fog up, just press this button - no need for manual wiping at all. It's really convenient for commuters.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

How to Remove and Install the Wiper Blades on Nissan Qashqai?

Nissan Qashqai wiper blade removal and installation method is as follows: 1. Push the wiper towards the front of the vehicle to the fixed position with slightly more force. Press the fixing button device of the wiper blade, hold the wiper blade at the same time, shake it upwards, and remove the wiper blade. 2. Open the two small buckles of the wiper to remove the old rubber strip. 3. When installing the prepared new rubber strip, use your fingers to spread the two metal pieces and insert them into the first groove. Do not install both sides at the same time, but do it side by side. 4. After the new rubber strip is successfully installed, follow the reverse order of the disassembly process to smoothly reinstall the wiper.
13
4
Share

How long does it take to fully charge a car after starting it?

It takes about half an hour of driving to fully charge the car battery after starting. Here is some related knowledge about car charging: 1. Purpose of charging: The electricity in the battery is mainly used to start the car, which consumes a significant amount. However, once the car is running, the battery no longer consumes electricity. 2. Precautions: While the car is running, the generator charges the battery, so there is rarely a need for dedicated charging. But if the battery is severely depleted due to an accident, it should be charged promptly and not rely solely on the car's own charging system. Generally, after the car engine is turned off, the switches of related equipment in the car should be closed in time, otherwise it may cause severe battery depletion.
14
5
Share

How to Flatten the Rear Seats in the GS4?

Here are the steps to flatten the rear seats in the Trumpchi GS4: 1. Locate the release handle in the middle of the backrest. 2. Pull the handle outward to flatten the seat. Below is additional information about the Trumpchi GS4: 1. The Trumpchi GS4 measures 4545mm in length, 1856mm in width, and 1668mm in height. 2. It has a wheelbase of 2680mm, a minimum ground clearance of 190mm, and a fuel tank capacity of 50 liters. 3. The Trumpchi GS4 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124 kW and a maximum torque of 265 Nm, paired with a 6-speed manual transmission.
18
4
Share

What does Corolla Dual Engine refer to?

Toyota Corolla Dual Engine sedan means it has two "engines" that jointly drive the vehicle, namely a gasoline engine and an electric motor (hybrid). Below is more information about Corolla Dual Engine: 1. The Corolla Dual Engine has a body length of 4630mm, width of 1775mm, height of 1485mm, and wheelbase of 2700mm. 2. The Corolla Dual Engine is equipped with a 1.8L Atkinson cycle engine with the model code 8ZR-FXE. 3. The Corolla Dual Engine features a highly distinctive and advanced exterior design. The front fascia adopts slim LED headlights and "lightning-shaped" LED position lights, combined with chrome trim strips featuring both glossy and matte textures, presenting a premium feel.
8
2
Share

What is the Giulia?

Giulia is Alfa Romeo's first model introduced in China, positioned as a mid-size sedan. Here are the relevant details: 1. The first-generation Giulia, codenamed 105, was Alfa Romeo's main model from the 1960s to the 1970s. The current Giulia, codenamed 952, is a key product of FCA's "Alfa Romeo Revival Plan" and marks AR's return to a longitudinal engine rear-wheel-drive platform after more than two decades. 2. The Giulia is built on FCA's Giorgio platform, measuring 4643mm in length, 1436mm in height, with a wheelbase of 2820mm.
3
2
Share

Where is the relay located in the Venucia T90?

The relay in the Venucia T90 is located inside the engine hood, near the battery or inside the black box above the left and right front shock absorbers. Here is some information about relays: 1. A relay is an electrical control device that causes a predetermined step change in the controlled quantity in the electrical output circuit when the input quantity (excitation quantity) changes to meet specified requirements. 2. A relay is an automatic switching component with isolation function, widely used in remote control, telemetry, communication, automatic control, mechatronics, and power electronic equipment, making it one of the most important control components.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.