How to activate the one-touch window roll-down feature with the key for the Great Wall F7?

2 Answers
OAnna
07/29/25 4:29pm
To activate the one-touch window roll-down feature with the key for the Great Wall F7, you need to visit a 4S dealership to enable this function, and you will also need to sign a liability waiver (as one-touch window operation carries certain risks). The method to use this feature is to press and hold the lock or unlock button on the remote key to roll the windows up or down with one touch. One-touch window operation refers to: 1. A system where the car window glass can be adjusted to roll up or down with a single press of a button. 2. Cars equipped with one-touch window operation have a two-stage window control switch. The first stage works like a regular power window, while the second stage allows the window to automatically fully open or close with a single press and release. 3. Currently, most mid-to-high-end car models are equipped with the one-touch window feature, primarily for the convenience of drivers and passengers, preventing the driver from being distracted while operating the windows, thereby improving safety.
Was this review help?
14
4
Share
DanielaFitz
08/14/25 5:35am
My friend just bought a Great Wall Haval F7, and I'll teach you how to activate the one-touch window drop function with the key. After getting in the car, first sit in the driver's seat and make sure the vehicle is powered on but don't start the engine. Then press the settings button on the center console, navigate to the 'Vehicle Settings' menu, and look for an option called 'Remote Control' or 'Window Settings'. After selecting it, check the box for 'Enable One-Touch Window Drop Function', and finally save and exit. After activation, test it out: stand outside the car with the key and hold the unlock button for more than two seconds, and all the windows will simultaneously lower. This feature is super convenient for quickly ventilating and cooling the car in summer, but be careful not to activate it near children to avoid accidental pinching. I've been driving this car for two years, and every time I activate it, I make sure the system is updated to the latest version; otherwise, the settings might fail. Remember to regularly check the battery level, as a weak key signal can affect the function. This operation basically takes a minute or two and doesn't interfere with daily driving at all.
Was this review help?
17
2
Share
Expand All
More Forum Discussions

How to activate the automatic handbrake on a Camry?

Mechanical handbrake, located on the left side of the gear lever, is engaged by lifting the handbrake lever and released to allow the vehicle to move. Electronic foot brake, located on the left side of the brake pedal, is engaged by pressing the brake with the left foot to stop the vehicle, and released by pressing and then lifting the foot. Electronic handbrake, located behind the gear lever, is engaged by lifting it with a finger when the vehicle is stationary, and released by pressing the brake pedal and then pressing the electronic handbrake button before starting the vehicle. Alternatively, it can be automatically released by lightly pressing the accelerator while wearing the seatbelt.
19
1
Share

What are the correct driving steps for an automatic transmission car?

The correct driving steps for an automatic transmission car: 1. Turn the ignition key to the second position (power mode) to allow the car's computer system to perform self-check for at least 6 seconds. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to start the engine. 4. When starting the car after prolonged parking, it's recommended to warm up the engine for 1-2 minutes while stationary. 5. Press the foot brake and shift the gear from N to D, then release the parking brake (for electronic parking brake, simply press the button briefly). 6. Gradually release the foot brake to start moving. 7. Apply the accelerator smoothly according to road conditions for safe driving.
2
1
Share

What Causes the Abnormal Noise After Installing Snow Tires?

The reasons for abnormal noise after installing snow tires include severely worn brake pads, damaged shock absorbers, deformed wheel hubs, tire wear, or damaged drive shafts. Causes: The vehicle's braking force will decrease when encountering objects like nails or stones. Solutions: Promptly replace the brake pads. If the wear on the left and right drive wheels is uneven, it is generally recommended to first install new tires on the non-driven wheels for some mileage. After the four tires have worn in, perform a cross rotation. For regular use, it is best to perform a cross rotation every 20,000 kilometers, as the driven wheels are dragged along and tend to wear unevenly compared to the drive wheels. Have a repair shop inspect further. Replace the wheel hub if necessary.
1
1
Share

What brand is Qoros?

Qoros is an independent automotive brand, which was founded in China. Qoros Auto is a joint venture company providing automotive products and services, headquartered in Changshu, Jiangsu. The models under the Qoros brand include: Qoros 3, Qoros 7, Qoros 5, Qoros 3 City SUV, and Model Young. Taking the Qoros 3 as an example: it is a compact car with a length, width, and height of 4627mm, 1839mm, and 1445mm respectively, and a wheelbase of 2702mm. In terms of power, the Qoros 3 is equipped with an L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 115kw and a maximum torque of 230nm.
16
4
Share

How to Playback Recorded Videos on Camry Dash Cam?

Remove the TF memory card from the dash cam, insert it into a card reader, and then connect it to a computer to access the recorded content. Connect the dash cam to a computer using a USB cable, and the computer will recognize the dash cam as a mass storage device. The dash cam is equipped with a display screen. You can playback videos directly on the dash cam. The general method is to first pause the recording, then press the "MODE" button. Locate the recorded video and click "OK" to play it. Press the MODE button to make a selection and click on the recorded video file.
14
3
Share

What causes the airbag warning light to illuminate on the dashboard?

The reasons for the airbag warning light illuminating on the dashboard: 1. Foreign objects around the airbag sensor wiring harness, especially metal debris causing a short circuit, leading to false warnings. 2. The warning light may illuminate due to erroneous data reported by the car's ECU sensor. 3. If the warning light comes on without reason, it is likely caused by the vehicle being parked in a humid environment for a long time or moisture in the wiring connectors during car washing, resulting in a short circuit. 4. A fault in the airbag itself, mostly caused by loose connectors. However, if the USB also fails, the fault in the airbag itself can be largely ruled out.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.