How to activate the one-touch window lowering feature on Citroen C-Quatre?

2 Answers
DelMaci
07/23/25 8:46pm
The method to activate the one-touch window lowering feature on Citroen C-Quatre is: 1. Press the window switch down completely. 2. Then hold it until the window fully closes and continue holding for 10 seconds. 3. Repeat this process for each window switch. 4. The activation will be successful. Additional information: 1. One-touch windows generally have an "anti-pinch" function to prevent potential hand injuries. 2. Only the driver's window has the one-touch feature. This design assumes the driver is an adult capable of vehicle operation, while other positions may not be. It's not just for cost reduction but mainly to prevent the driver from being distracted by window operations.
Was this review help?
7
1
Share
EliasLee
08/10/25 6:42pm
Activating the one-touch window drop feature on the Citroen C-Quatre is quite simple, and I've tried it multiple times. The key lies in the master window switch on the driver's side: Sit down and start the vehicle, then press and hold the switch downward for about one second or longer until you feel a slight click or hear a soft sound. Release your hand, and the window will automatically lower to the bottom. If you press it lightly, you can only manually control it to stop at a midway position. This feature is particularly useful for quickly cooling down the car on hot days or facilitating communication when entering/exiting parking lots. If it doesn't work, check whether the doors are locked or if the ignition switch is in the correct position. Additionally, regularly clean dust around the switch to prevent poor contact and extend its service life. Avoid excessive use while driving to prevent strong winds from affecting driving safety.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

What is the solution for the Baojun 560's automatic locking issue?

The issue of random automatic locking is caused by a faulty central locking block, and replacing the locking block can resolve it. If the vehicle is still under warranty, you can request a free replacement from an authorized dealer or the manufacturer. After turning off the engine, the random automatic locking issue may cause the locks of all four doors to continuously lock and unlock. In this case, you can replace the central control unit or the central locking block.
2
4
Share

How to Deduct Points in Hill Start and Stop?

If the vehicle's bumper is not positioned on the pole line, exceeds 50 cm forward or backward, or rolls back more than 30 cm when starting, the test will be failed. If the vehicle's bumper is not positioned on the pole line but does not exceed 50 cm forward or backward, or the vehicle body is not stopped within 30 cm from the right edge of the road, 20 points will be deducted. If the vehicle rolls back less than 30 cm when starting, 20 points will be deducted.
19
1
Share

How to Use Lights When Driving Over a Hump Bridge at Night?

When driving uphill, you should accelerate in advance to climb the slope and alternately use high and low beams to signal, alerting oncoming vehicles and pedestrians. As the vehicle approaches the top of the slope, you should reasonably control the speed and switch from high beams to low beams to prevent dazzling oncoming drivers and causing the vehicle to lose control. When driving downhill, you should turn on the high beams to increase the range of visibility.
2
2
Share

How to Deal with Bubbles in Window Tint Film?

If there are not many bubbles, you can use a needle to puncture the bubble and then slowly press it flat. If the bubbles are not too numerous and are relatively large in size, you can make a small cut and then use a squeegee and a heat gun to slowly flatten it, which will make the bubbles disappear. If the bubbles are caused by trapped air, you need to peel off half of the film and follow the standard procedures used in professional installation shops. It's best to have a specialized technician handle the installation.
17
5
Share

How to distinguish between internal and external air circulation in the Volkswagen Lavida?

Step on the brake pedal of the Volkswagen Lavida. Turn the key forward to start the car. The dashboard lights up, and the vehicle's power is fully activated. Rotate the air speed adjustment knob of the Volkswagen Lavida to select any desired fan speed. The Volkswagen Lavida defaults to external air circulation. Press the internal circulation mode button, and the indicator light will illuminate, activating the internal circulation mode.
19
0
Share

How to Check Fuel Level on a Mercedes-Benz Fuel Gauge?

When the fuel gauge points to the 0 position, it indicates that the vehicle's fuel tank is low on fuel. When the needle is between 0 and 1, it means the fuel tank is half full. Based on the vehicle's fuel condition, it is advisable to add fuel and not wait until the fuel warning light comes on. When the fuel gauge points to the 1 position, it indicates that the vehicle's fuel tank has sufficient fuel.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.