How to activate the one-touch window lift function in Sagitar?

1 Answers
OEverly
07/29/25 9:52pm
To activate this function, first start the vehicle. Press and hold the button down for 5 seconds, then pull it up for 5 seconds. The system will complete the recording and successfully activate the function. Below is relevant information about the Sagitar: 1. Introduction: Since its launch, the Volkswagen Sagitar has showcased the essence of German Volkswagen design with its smooth lines and dynamic proportions. With exquisite craftsmanship, rigorous manufacturing, and cutting-edge technology, it continues to lead the development of China's A+ segment sedan market. 2. Product Highlights: Meticulously crafted by Volkswagen's top German design team, the new Sagitar simplifies complexity by innovatively redesigning its exterior and interior while inheriting the classic design of the current model. The family-style front fascia design further aligns with B-segment models, delivering a luxurious and premium leap-forward appearance.
Was this review help?
18
2
Share
More Forum Discussions

What are the effects of adding 92-octane gasoline when 95-octane gasoline is not fully used up?

The effects of adding 92-octane gasoline when 95-octane gasoline is not fully used up are: 1. Occasionally mixing once will not harm the car or the engine; 2. Long-term mixed use may cause engine knocking, increase carbon deposits in the engine, raise fuel consumption, and wear the engine. If you want to change the gasoline grade, you can switch directly. However, when switching from a higher grade to a lower grade, it is recommended to wait until the fuel gauge light comes on (i.e., the fuel gauge pointer is in the red zone) before refueling. It is also advisable to stick to one grade of gasoline and avoid frequent switching. Higher-octane gasoline is not necessarily better, as it burns slower, which can reduce engine power and increase temperature.
11
1
Share

What are the hidden features of the 2020 Tiggo 5x Fashion Edition?

The hidden features of the 2020 Tiggo 5x Fashion Edition are: 1. Close windows after turning off the engine: Press and hold the lock button on the remote key to close the windows; 2. Parking light function: The taillights remain on when parked on the roadside, and only one side is illuminated. Taking the Tiggo 5x 2020 1.5L Manual Fashion Edition as an example: its body dimensions are 4358mm in length, 1830mm in width, and 1670mm in height, with a wheelbase of 2630mm. The Tiggo 5x 2020 1.5L Manual Fashion Edition is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kw and a maximum torque of 143nm, matched with a 5-speed manual transmission.
19
1
Share

What are the hazards of parking without pulling the handbrake and only shifting to P gear?

The hazards of parking without pulling the handbrake and only shifting to P gear are: 1. The vehicle may roll; 2. On a slope, if the handbrake is not engaged, the entire weight of the vehicle sliding downward will be borne by the transmission parking mechanism, which can damage the transmission. The correct parking procedure for an automatic transmission is: first press the brake, then shift to neutral, pull the handbrake, shift to P gear, and finally turn off the engine. Engaging the handbrake transfers the main parking force to the braking system, thereby maximizing protection for the car's transmission. It is essential to develop good driving habits in daily driving. Sometimes, minor issues may not have an immediate significant impact, but over time, they can cause damage to the vehicle.
8
3
Share

What causes the clunking impact when shifting into reverse in an automatic transmission?

Automatic transmission shifting into reverse with a clunking impact is caused by: 1. Electronic linkage between the brake system and the automatic transmission: When shifting gears, the clutch pedal is not fully depressed, causing gear damage; 2. Idle shifting: The automatic transmission model shifts into reverse before the engine speed drops to a stable state, causing a strong impact on the transmission; 3. Reverse gear lacks a synchronizer: The synchronizer is an internal device of the transmission that ensures smooth gear engagement when shifting while driving. Automatic transmissions do not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.
12
3
Share

What is the principle of ABS?

ABS system, also known as the Anti-lock Braking System, works on the following principle: During braking, the ABS closes the normally open input solenoid valve on the wheel that is starting to lock based on the speed signals from each wheel speed sensor, keeping the braking force constant. If the wheel continues to lock, the normally closed output solenoid valve is opened. This ensures the braking state remains at the optimal point, achieving the best braking effect and maximum driving safety. ABS, short for Anti-lock Braking System, functions by automatically controlling the braking force during vehicle braking to prevent wheel lock-up, maintaining a state of rolling and sliding (with a slip ratio of around 20%). This ensures the maximum adhesion between the wheels and the road surface. The ABS system mainly consists of four components: wheel speed sensors, the electronic control unit (ECU), the hydraulic unit, and the ABS warning light. The wheel speed sensors detect the motion state of the wheels and generate sinusoidal electronic pulse AC signals. These signals are then processed by a modulator, converted into digital signals, and transmitted to the electronic control unit. The electronic central control unit (ECU) receives input signals from the wheel speed sensors and uses these parameters to calculate the wheel speed, vehicle speed, and slip ratio. Based on the slip ratio, it determines the wheel state and issues control commands to the hydraulic unit. The hydraulic unit adjusts the pressure in the brake lines according to the control commands, with the adjustment process including pressure maintenance, pressure increase, and pressure decrease. The ABS warning light alerts the driver to any system malfunctions. If the ABS warning light comes on, it is recommended not to continue driving. This is because the ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may skid uncontrollably, making it difficult for the driver to slow down or adjust the vehicle's trajectory, posing significant safety risks.
11
0
Share

What type of gasoline should the Li ONE use?

Li ONE officially recommends using 95-octane gasoline. When using 95-octane gasoline, the engine operates with lower noise and RPM, providing better smoothness and maintaining ideal working conditions, thereby achieving better fuel economy. 95-octane gasoline consists of 95% isooctane and 5% n-heptane. Taking the Li ONE 2021 Extended Range 6-Seater version as an example: it is a mid-to-large SUV launched by Li Auto, with dimensions of 5030mm in length, 1960mm in width, and 1760mm in height. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 96kW, and paired with a single-speed transmission for electric vehicles.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.