How to Activate the One-Touch Window Lift for Venucia T70?

1 Answers
FelixLee
07/28/25 6:21pm
Activation method for the one-touch window lift of Venucia T70: 1. Use a screwdriver to pry off the small round cover in the door slot and remove the window lift box; 2. Connect the window lift main unit in parallel to the original window interface, male to female, leaving the female port with the blue ring for inserting into the car's window lift box; 3. Take out the plastic screwdriver from the small box in the car door slot and connect it to the main unit. The one-touch window lift function of the car means that pressing the switch will automatically raise the window to the top, and releasing it will automatically lower it to the bottom. The window lift can prevent forgetful car owners from having items stolen due to forgetting to close the windows. The one-touch window lift function is achieved through the window lift, which is divided into three types: time-controlled, program-controlled, and intelligent window-closing systems.
Was this review help?
7
2
Share
More Forum Discussions

How to Correct Steering During Driving Practice?

When the car forms a \ shape, it indicates the rear of the vehicle is tilting to the right, requiring leftward steering correction. When the car forms a / shape, it means the vehicle body is tilting to the left, necessitating rightward steering correction. When the car forms a straight line but with the left side wider and the right side narrower, leftward steering adjustment is then required.
1
5
Share

How to Start a Lexus When the Battery is Dead?

Open the hoods of both cars, connect the negative terminal of the jumper cables to the negative terminal, start the other car, rev the engine, and then try to start your own car. First, turn the key to the ignition position, press the clutch, release the handbrake, put the gear in 1st or 2nd, keep the clutch pressed, and start pushing the car. First, you need a sturdy tow rope to securely tie the front and rear of both cars together. Then you can begin towing to start the car.
18
1
Share

How to Remove Stubborn Door Cup Protectors?

Wait until summer, park the car outside under direct sunlight for a while, then slowly peel it off while it's still hot. Alternatively, you can use a hairdryer to heat the protector while peeling it off. Use a lighter flame to gently heat the edge of the protective film, causing it to slightly lift. Then, you can easily peel it off. Finally, purchase some tar remover, spray it on the door cup area, let it sit for about a minute, and then wipe it clean with a towel.
12
0
Share

How to Solve High Fuel Consumption in the 2014 Kia Forte?

Engine carbon deposits, if not cleaned in time, will lead to increased fuel consumption, so it is necessary to clean the engine carbon deposits. If the spark plugs are damaged, the ignition energy will decrease, causing the car to accelerate slower and fuel consumption to rise. In this case, new spark plugs need to be replaced. Abnormal tire pressure, where the pressure of the car tires is not normal, will also affect the car's fuel consumption. Check the tire pressure and replenish it in time.
15
2
Share

What is the correct way to depress the clutch pedal?

When starting the car, quickly depress the clutch pedal and then rapidly release it to the semi-engaged state while slightly applying the throttle. First reduce the car speed until it reaches the point where downshifting is required, then quickly depress the clutch to control it. Increase the throttle to raise the engine speed, quickly depress the clutch, and slowly release it. You may slightly apply throttle during the gradual clutch release. Depress the clutch when the car speed needs to be below 15KM/H, then use the brake to bring the car to a complete stop.
1
0
Share

How to Connect Bluetooth in an Older Model Suzuki Swift?

First, turn on the car's Bluetooth system and enter the settings page. There will be a connection or pairing button—select the corresponding option. Then, open your phone and enable Bluetooth in the phone's settings. There should be an "Add Device" or "Search for New Devices" option. Next, wait for your phone to automatically detect the car's Bluetooth, then click to pair and connect. Finally, enter the correct pairing code. Once done, you will receive a notification indicating a successful connection, allowing you to make calls, play music, and more.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.