How to Activate the Jack Mode on the Touareg?

Should You Shift to N Gear When Waiting at a Red Light with an AT Transmission?

You should not shift to N gear when waiting at a red light with an AT transmission. Here is more information about the N gear: 1. Definition: The N gear is one of the three standard gears in automatic transmission vehicles, located between the R gear and D gear on the gear shift console. It essentially represents the neutral gear in the transmission. 2. Function: Its purpose is to cut off the power transmission between the input shaft and the output shaft inside the transmission. 3. Precautions: Automatic transmission vehicles should not coast in neutral under non-special circumstances, as it is unsafe and can lead to transmission damage due to insufficient lubrication of gears and other components caused by inadequate oil supply from the transmission oil pump. Additionally, the N gear is purely neutral and lacks a braking mechanism, requiring the use of the handbrake or brake pedal to park; otherwise, the vehicle may roll on uneven surfaces.

19

4

Share

What are the differences between four-matching and six-matching sets?

Engine four-matching set includes: piston, piston pin, piston rings, and cylinder liner. Engine six-matching set includes: connecting rod, piston, piston rings, cylinder liner, main bearing shells, and connecting rod bearing shells. Below are the related introductions: 1. Four-matching set: Its purpose is to provide convenience for users when purchasing parts for diesel engine repairs. When there is no cylinder liner, it is called a piston assembly. 2. Six-matching set: These are the moving components of the engine, working in conjunction with the fuel system and valve train. They complete the engine's intake, compression, power, and exhaust strokes, converting chemical energy into mechanical energy to output power. Because they endure significant mechanical and thermal loads, they are the most important and most prone to failure components in the engine.

2

5

Share

Which Side of the Spare Tire Faces Outward During Installation?

When installing a spare tire, the side with the "OUTSIDE" marking should face outward. If there is no such marking, the side with the numbers should face outward. Below are some precautions for tire usage: 1. Regular Replacement: Tires are rubber products, and rubber deteriorates over time, so tires need to be replaced periodically. Under normal conditions, tires installed on a vehicle can last for four years, so it is recommended to replace them every four years. 2. Shelf Life: When purchasing new tires, always check the production date because tires have a shelf life. Normally, unused tires have a shelf life of three years. If the tires have been in storage for more than three years, they should not be purchased. 3. Dynamic Balance Test: After installing new tires, it is essential to perform a dynamic balance test on each wheel to prevent abnormal vibrations during high-speed driving.

8

0

Share

What is the difference between passenger liability insurance and driving-passenger insurance?

The differences between passenger liability insurance and driving-passenger insurance are as follows: 1. Different definitions: Passenger liability insurance is purchased per seat, while driving-passenger insurance is divided into two types: "per person" and "per vehicle" coverage. 2. Different insurance liabilities: Passenger liability insurance is a liability insurance, meaning compensation is only provided if the driver's fault causes an accident resulting in personal injury to passengers. Driving-passenger insurance (per vehicle) is an accident insurance, where compensation is provided to anyone in the vehicle regardless of who is at fault. 3. Different compensation ratios: Passenger liability insurance pays compensation based on the proportion of liability—100% for full liability, 70% for primary liability, 50% for secondary liability, 30% for equal liability, and no payment if not at fault. Driving-passenger insurance pays the agreed insured amount as per the policy terms, regardless of who is at fault.

19

0

Share

Differences Between Dongfeng Nissan and Zhengzhou Nissan

Differences between Dongfeng Nissan and Zhengzhou Nissan are as follows: 1. Different affiliations: Dongfeng Group and Nissan Motor Co., Ltd. jointly established Dongfeng Limited, which oversees Dongfeng Motor Corporation and Dongfeng Nissan. Dongfeng Motor Corporation oversees Zhengzhou Nissan, making both Zhengzhou Nissan and Dongfeng Nissan subsidiaries of Dongfeng Limited. 2. Different vehicle production: In terms of models, Dongfeng Nissan primarily produces high-end sedans and SUVs, while Zhengzhou Nissan mainly produces high-end pickup trucks, modified vehicles, and multi-purpose commercial vehicles. 3. Different establishment times: Zhengzhou Nissan was Nissan's first joint venture automaker in China, established in May 1993 as a Sino-Japanese joint venture for vehicle manufacturing. Dongfeng Nissan is a joint venture between Dongfeng Motor Corporation and Nissan Motor, established in June 2003. With Dongfeng Motor's strong backing, Nissan's sales began to recover rapidly, reaching cumulative sales of one million vehicles by 2015.

2

Share

How to Check the Car Fuel Gauge?

Car fuel gauge reading method: Generally, there are two English letters on the fuel gauge - E represents empty (no fuel), and F represents full. The fuel gauge contains two coils located on the F and E sides respectively. The sensor is a variable resistor controlled by float height. The resistance change determines the magnetic field strength of the two coils, which in turn determines the deflection direction of the needle. Some temperature gauges and fuel gauges use indicator lights instead - the temperature warning light indicates high engine temperature, while the fuel warning light serves as an auxiliary reminder when fuel is running low. The fuel level display works via a float in the fuel tank connected to a metal rod. This principle is similar to a toilet water tank mechanism. The end of the float-connected metal rod attaches to a movable contact point on a variable resistor. The positional changes of the float on the fuel surface alter the resistor's contact position through the metal rod. This variable resistor connects to the car's fuel gauge, where the needle movement is controlled by the amount of current passing through the variable resistor.

12

1

Share

How to Activate the Jack Mode on the Touareg?

Should You Shift to N Gear When Waiting at a Red Light with an AT Transmission?

What are the differences between four-matching and six-matching sets?

Which Side of the Spare Tire Faces Outward During Installation?

What is the difference between passenger liability insurance and driving-passenger insurance?

Differences Between Dongfeng Nissan and Zhengzhou Nissan

How to Check the Car Fuel Gauge?

What does h8 mean?

What does the A-circle indicator light on the car mean?

What is the range of the BYD Han EV?

When will the ATS-L be updated?