How to activate the horn when locking the Octavia?

1 Answers
OliviaLee
07/24/25 10:53pm
The method to activate the horn when locking the Octavia, taking the Octavia 2020 TSI230 DSG Zhixing Luxury Edition as an example: 1. Sit in the driver's seat, press the brake pedal, and ensure the gear shift lever is in the P position; 2. Release the brake pedal, then power on the vehicle twice by turning the key clockwise to the ON position; 3. After closing all doors, press and hold the lock button on the remote key for more than 10 seconds to activate the locking horn. In terms of power, the Octavia 2020 TSI230 DSG Zhixing Luxury Edition is equipped with a 1.2L turbocharged engine, with the engine block made of aluminum alloy, delivering a maximum power of 85kW and a maximum torque of 200Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
8
1
Share
More Forum Discussions

How to adjust the brakes?

If the free travel of the brake pedal gradually increases, stop the car and press the brake pedal firmly to restore it. If the free travel of the brake pedal is inherently large from the factory, there is only one place to adjust it: there is an adjustment screw on the push rod between the vacuum booster and the brake master cylinder.
4
1
Share

How to reset the airbag light after removing the seat?

At the 4S dealership, if it is confirmed that a fault has been detected in the airbag connector, seat belt sensor, or airbag sensor. This will require replacing the airbag control unit. If the car has been involved in a collision before, this aspect should be considered.
4
5
Share

Can Regular Cars Be Equipped with Run-Flat Tires?

Regular cars can be equipped with run-flat tires if the specifications match. Vehicles designed for run-flat tires have special matching designs in the chassis, suspension, and rims. Additional information is as follows: 1. Run-flat tires, also known as "self-supporting tires" or "low-pressure continuation tires," work by thickening the sidewalls. When deflated, the thick sidewalls provide support, allowing the car to continue driving. They are not truly "explosion-proof" or puncture-proof, but their durability exceeds that of other tires on the market, offering better safety. With run-flat tires, there's no need to worry about tire blowouts, eliminating the need to carry a spare tire or repair tools, thus reducing travel burden. 2. Run-flat tires are harder than regular tires and become even stiffer in low temperatures, leading to reduced tire grip and climbing ability. It's important to note that while run-flat tires can support the car for a certain distance in a deflated state, they cause significant damage to the tire. If driven too far in this condition, the tire may be ruined. Leaks in run-flat tires should be repaired promptly.
14
4
Share

How to Replace Brake Discs?

First, remove the brake caliper and then the brake disc shield. Inspect the brake disc for deep grooves caused by foreign object abrasion or uneven wear on the disc surface. Install the new brake disc shield, tighten the rear wheel bearing, attach the bearing cap, and mount the caliper bracket. After installing the brake pads, reattach the brake caliper and tighten the screws.
6
4
Share

Can Hybrid Cars Get New Energy License Plates?

Hybrid cars can obtain new energy license plates, but not all models are eligible. Plug-in hybrid vehicles can get green license plates, while conventional hybrid models cannot. More details about new energy license plates are as follows: 1. New energy vehicle license plates are divided into small new energy vehicle license plates and large new energy vehicle license plates. The dimensions of new energy vehicle license plates are 480mm*140mm, with small new energy vehicle license plates featuring a gradient green color and large ones using a yellow-green dual-color scheme. 2. New energy vehicle license plates embody the concept of "green environmental protection," with green as the main color tone, adding special identifiers and applying new anti-counterfeiting technologies and production processes. This not only enables differentiated management and easy identification but also highlights the characteristics of new energy and technological innovation. Among them, small new energy vehicle license plates use a gradient green background, while large ones use a yellow-green dual-color background. 3. The number of digits on new energy vehicle license plates has been increased by one. Compared to ordinary vehicle license plates, new energy vehicle license plates have been upgraded from 5 digits to 6 digits, increasing the capacity of license plate numbers and enriching resources. The encoding rules are more scientific and reasonable, meeting the need for "less use of letters and more use of numbers" in arrangement.
9
0
Share

How to Perform Parallel Parking?

Turn on the right turn signal, align the right 1/3 of the car hood with the parking line to maintain a distance of about 30cm between the car body and the line. Turn on the right turn signal, shift into reverse gear, slowly release the clutch, and keep the left foot steady when the car starts moving. When the left corner of the car touches the left side line, straighten the steering wheel. When the left 1/3 of the car hood touches the left side line, turn the steering wheel one full turn to the right.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.