How to Activate the Horn When Locking a Corolla?

1 Answers
LeAngelina
07/29/25 8:31pm
You can activate the horn sound when locking the car using the remote key by simultaneously pressing the unlock and lock buttons for 3 seconds until the lights flash. Note that this will only flash the lights without sounding the horn. To restore the original settings, press the lock and unlock buttons simultaneously again for 3 seconds until the lights flash. For settings, go to Sound, then Screen Lock Sound, and select "Play sound when locking and unlocking the screen." If you do not want the sound to play when locking the screen, simply uncheck the box.
Was this review help?
11
2
Share
More Forum Discussions

Is the Bestune T77 a joint venture car?

Bestune T77 is not a joint venture car. Bestune T77 is a brand under Bestune. In terms of power, the Bestune T77 is equipped with a 1.2T inline 4-cylinder turbocharged engine, with a maximum power of 105KW, a maximum torque of 204Nm, and a maximum horsepower of 143PS. In terms of appearance, its front suspension is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. In terms of body dimensions, the Bestune T77 has a length, width, and height of 4525mm, 1845mm, and 1615mm respectively, with a wheelbase of 2700mm, a front track of 1575mm, and a rear track of 1565mm.
8
1
Share

Does the Lavida have a wagon version?

The Lavida has a wagon version. The safety configurations of the Lavida include driver and front passenger airbags, front side airbags, front and rear head airbags, etc. The taillight design of the Lavida emphasizes the coordination with the front face, and the rear styling is very compact. A chrome strip between the taillight clusters connects the entire rear to form a unified whole. The dimensions of the Lavida are 4670mm in length, 1806mm in width, and 1474mm in height, with a wheelbase of 2688mm. It features front-wheel drive, a front MacPherson strut independent suspension, and a rear torsion beam non-independent suspension. The engine it is equipped with delivers a maximum horsepower of 150Ps, a maximum power of 110kW, and a maximum torque of 250Nm.
10
1
Share

How to Engage 4WD in Pajero?

To engage 4WD in the Pajero, simply shift the 4WD lever into the 4WD position. Next to the Pajero's gear lever, there are markings for H2, H4, H4L, and L4L on the 4WD lever. H2 is the two-wheel drive mode, while the others are all four-wheel drive modes. Specifically, H4 is high-speed four-wheel drive, H4L is high-speed four-wheel drive with the differential lock engaged, and L4L is low-speed four-wheel drive with the differential lock engaged. The Pajero's body dimensions are 4900mm in length, 1875mm in width, and 1900mm in height, with a wheelbase of 2780mm. It features a front-engine, four-wheel-drive layout, and its engine delivers a maximum power of 128kW and a maximum torque of 255Nm.
20
0
Share

What do the letters on the car gear shift represent?

The letters on the car gear shift represent the following: P stands for Parking gear, R stands for Reverse gear, N stands for Neutral gear, D stands for Drive gear, S stands for Hill Climbing gear, L stands for Low gear, and OD stands for Overdrive gear. The correct method for shifting gears in a manual transmission is to keep the five fingers together, lightly grip the gear knob with a relaxed hold, and use the forearm to guide the hand in shifting gears. It's important to apply gentle and slow force when shifting to avoid accidentally engaging the wrong gear, and always pause in neutral before shifting. The steps for starting a manual transmission car are: 1. Press the clutch; 2. Push the gear lever inward with the right hand, then push up into 1st gear; 3. Turn on the left turn signal; 4. Honk the horn; 5. Release the handbrake; 6. Steady the throttle; 7. Lift the clutch pedal.
1
0
Share

What is the ECTPWR mode?

ECTPWR is the activation status of the car's sport driving mode. The ECT (Electronic Throttle Control) system has three modes: 1. ECT Normal Mode: Used for regular driving to save fuel; 2. Power Mode: Enhances acceleration and sporty driving; 3. Snow Mode: Designed for slippery road conditions, where it appropriately controls the rear wheels' rotation. When the car is in ECTPWR gear, it makes the throttle response more aggressive or stabilizes the shift RPM to deliver stronger power. It also alters the chassis's filtering effect by stiffening the shock absorber damping to achieve more direct road feedback.
6
1
Share

How to Open the Door of a Porsche 911?

The method to open the door of a Porsche 911 is to pull the door handle once. The car door provides access for the driver and passengers, isolates external interference, and to a certain extent, reduces side impacts to protect the safety of the occupants. The Porsche 911 has a body length, width, and height of 4519mm, 1852mm, and 1298mm respectively, with a wheelbase of 2450mm. The Porsche 911 is equipped with a 3.0T twin-turbocharged engine, paired with a dual-clutch transmission. This engine has a maximum power of 283kw and a maximum torque of 450nm, and also features direct fuel injection technology, using an aluminum alloy cylinder head and block.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.