How to activate the headlight washer on a Tiida?
4 Answers
After turning on the headlights, simply activate the windshield wiper switch. The steps for headlight removal and installation are as follows: 1. Open the front hood of the car, locate the bulb, and take a photo to record the installation position of the headlight. 2. Then firmly pull out the bulb power cord with the blue coil. Inside the blue circle is the bulb socket, which requires a bit of force to remove. Directly pull it out to expose the lamp base; the metal handle inside the red circle is the lever to release the bulb's metal clip. 3. At this point, you can see how the power cord is pulled out. Be sure to first remove the bulb socket, then release the bulb's metal clip lever. 4. Press down in the direction of the blue arrow and hold, then push to the right to loosen the headlight clip. Once loosened, simply pull out the bulb. 5. Next, open the box of the newly purchased bulb and install the new bulb. 6. Finally, secure the bulb clip, plug in the bulb power cord, and the installation is complete.
As an owner of a 2017 Nissan Tiida for nearly five years, I can confirm the headlight washers are automatically triggered. First, ensure the headlights are turned on, then operate the windshield washer spray. You'll notice a nozzle extending from the base of each headlight to spray a fine mist for about 2-3 seconds before retracting. The system is straightforward—it's linked to the wiper washer mechanism, typically activating the headlight wash every 3-5 windshield sprays. However, in cold weather, be cautious: if the washer fluid freezes and spray pressure is insufficient, the nozzles may fail to extend. During freezing rain conditions, it's advisable to switch to winter-grade antifreeze washer fluid beforehand.
Having used the Tiida for over two years, the headlight washer is incredibly hassle-free—it doesn't require any separate operation! Simply adjust the headlight lever to low or high beam, then press the windshield washer button on the right side of the steering wheel as usual. After the windshield sprays water two or three times, the hidden nozzles on the front bumper will pop out with a 'click,' spraying water jets onto the headlights. They retract automatically after washing. However, it's advisable not to use it too frequently, as it consumes washer fluid quickly, and the nozzles might get stuck in sub-zero winter temperatures. I typically activate it once every month or two to keep the lines clear and have the mechanic check for any nozzle blockages during seasonal maintenance.
The design of the Tiida is quite clever—the headlight washer function is directly integrated into the wiper system. The operation involves three steps: pull the right-hand stalk on the steering wheel toward yourself (to spray washer fluid), hold it for more than 1.5 seconds, and two small black nozzles will pop out near the headlights on the front bumper to wash the lens. Keep an eye on the dashboard—a green washer icon will flash. If there’s no response, it’s likely due to insufficient washer fluid or frozen nozzles. Last week, my car suddenly couldn’t wash the headlights in the garage, but after refilling the washer fluid, it worked perfectly again. Nissan’s integrated design is much more convenient than a separate button, especially when driving at night—no need to distract yourself searching for a switch.
