How to Activate the Four-Wheel Drive on the Audi Q5L?

What do the wheel data J and ET mean?

J represents the shape and height of the wheel flange, while the ET value, also known as the ET offset, refers to the offset. The following are detailed explanations: 1. Considerations for J value installation: If the original tire is 195/65/15 and the standard tire should be 235/45/17, flatter tires are harder to find. During the modification process, based on the J value, the choice of tire width depends on the desired outcome. Selecting a point within the range affects handling and ride quality, with the midpoint offering a balance between the two. Choosing a narrower tire impacts handling, while a wider tire affects comfort. 2. Considerations for ET value installation: Changing the wheel's offset alters the vehicle's track width, which is the distance between the centerlines of the tires. Therefore, simply increasing the wheel and tire size without changing the offset does not affect the track width. Impact of changing the offset: Using a wheel with a smaller positive offset value widens the track width, reducing body roll during cornering and improving the vehicle's cornering speed limit.

20

3

Share

Where is the Buick rearview mirror button located?

Buick rearview mirror button location introduction: The Buick rearview mirror button is located on the side of the driver's door. Vehicles equipped with manually foldable rearview mirrors can be manually folded inward when entering an automatic car wash to prevent damage. Pull the rearview mirror toward the car body to fold it. Push the rearview mirror outward to return it to its original position. Here is an introduction to the functions of the rearview mirror: 1. For the convenience of the driver's operation, to prevent traffic safety accidents and ensure personal safety, rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust direction. 2. The driver can directly obtain external information about the rear, side, and lower parts of the car while sitting in the driver's seat.

1

4

Share

How to Check Fuel Consumption When Buying a Car?

Most vehicle models come equipped with an onboard computer that displays average fuel consumption, which can be viewed by adjusting the display information. The formula for calculating fuel consumption per 100 kilometers is: (Fuel consumed in a period * 100) / Distance traveled in that period. This allows for an estimation of the vehicle's fuel consumption during actual driving. Below are relevant details about the calculation methods: 1. Onboard Computer Calculation: For better-looking data, the fuel consumption figures calculated by the onboard computer are generally lower than the actual consumption because the computer defaults to zero fuel consumption when the car is idling. Therefore, the onboard computer's fuel consumption data can only serve as a reference and is not 100% accurate. 2. Manual Calculation: The vehicle's fuel consumption = Fuel consumed / Distance traveled, with the unit being L/km. For example, if you fill an empty tank with xx dollars worth of gasoline and drive a total of xx kilometers, you can calculate the average fuel consumption as xx L/km based on the price per liter of gasoline being xx.

20

2

Share

In which year was the Porsche 991.1 produced?

In 1963, the 911.1 was the first generation of Porsche. The Porsche 911 was first exhibited at the Frankfurt Motor Show, where it was initially named the Porsche 901. However, Peugeot protested because they had already registered all three-digit numbers with a '0' in the middle as model codes for their vehicles. Porsche renamed it to '911' for the first mass production. Related information: 1. Chassis: The 911.1's chassis and drivetrain largely adopted technology from the Porsche 356, including four-wheel disc brakes and rear suspension, while the front suspension was newly developed. 2. Engine: The 911.1 featured a rear-mounted, air-cooled, horizontally opposed engine with a displacement increased to 2.0L and six cylinders. This engine produced a maximum power of 130 horsepower and peak torque of 161 Nm, paired with a new 5-speed close-ratio manual transmission. It accelerated from 0 to 100 km/h in 9.1 seconds and had a top speed of 210 km/h.

16

1

Share

What are the precautions for sleeping in a car on rainy days?

Here are the precautions to take when sleeping in a car on rainy days: 1. Ensure ventilation: No matter where you are, safety is paramount. Keeping the air flowing is crucial, and opening the windows slightly is a good option. However, be mindful of personal safety—opening the windows too wide might attract unwanted attention, so a small gap is sufficient to maintain airflow while ensuring safety. 2. Use the external air circulation mode: Some drivers prefer using the internal air circulation mode to maintain the car's temperature when the air conditioning is on. While this is generally fine, avoid using internal circulation when resting or sleeping. Instead, switch to external circulation with natural airflow and avoid turning on the air conditioning compressor if possible. 3. Choose the parking location wisely: When traveling, rest stops may not always be in ideal locations, and you might end up parking in a confined space. Small spaces can lead to carbon monoxide buildup, and underground parking garages, in particular, have poor air circulation and lower oxygen levels compared to open areas. Therefore, try to choose open spaces for resting and avoid parking on roadways or curves.

20

3

Share

Which article stipulates that motorcycles should keep to the right?

The relevant provisions on traffic regulations in the "Road Traffic Safety Law of the People's Republic of China": Article 35 states that motor vehicles and non-motor vehicles shall keep to the right. Article 57 states that non-motor vehicles driving on the road shall comply with relevant traffic safety regulations. Non-motor vehicles shall drive within the non-motor vehicle lane; on roads without a non-motor vehicle lane, they shall keep to the right side of the vehicle lane. Below is a detailed introduction to the basis for motorcycles keeping to the right: 1. "Traffic Regulations": Article 36 of the "Traffic Regulations" points out: According to road conditions and traffic needs, roads are divided into motor vehicle lanes, non-motor vehicle lanes, and sidewalks. Motor vehicles, non-motor vehicles, and pedestrians shall travel in their respective lanes. On roads without divided motor vehicle lanes, non-motor vehicle lanes, and sidewalks, motor vehicles shall travel in the middle of the road, while non-motor vehicles and pedestrians shall travel on both sides of the road. 2. "Regulations on the Application and Use of Motor Vehicle Driving Licenses": Article 91 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" points out: If an applicant violates relevant laws and regulations while learning to drive on the road, the traffic management department of the public security organ shall impose a fine of not less than 20 yuan but not more than 200 yuan on the instructor or accompanying guide.

20

3

Share

How to Activate the Four-Wheel Drive on the Audi Q5L?

What do the wheel data J and ET mean?

Where is the Buick rearview mirror button located?

How to Check Fuel Consumption When Buying a Car?

In which year was the Porsche 991.1 produced?

What are the precautions for sleeping in a car on rainy days?

Which article stipulates that motorcycles should keep to the right?

How to Shift to Neutral When the Electronic Gear Lever Has No Power?

Is it a traffic violation to borrow a lane for a right turn?

How to Check a Car's Weight?

Why is Michelin 4ST cheaper than 3ST?