How to Activate the Eco Mode in the Leiling 1.2T?

1 Answers
SamuelFitz
07/30/25 8:26am
The method to activate the Eco mode in the Leiling 1.2T is as follows: 1. Press the vehicle's one-touch start button to start the engine; 2. Locate the Eco control button on the right side of the steering wheel, below the central dashboard; 3. Press the Eco mode button, and the Eco light on the vehicle's dashboard will illuminate, indicating that the Eco mode is activated. Taking the 2021 Leiling 1.2T as an example, its body dimensions are: length 4640mm, width 1780mm, height 1455mm, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, a trunk capacity of 471 liters, and a curb weight of 1350kg.
Was this review help?
14
3
Share
More Forum Discussions

What are the causes and solutions for high fuel consumption in scooter motorcycles?

The causes and solutions for high fuel consumption in scooter motorcycles are as follows: 1. Air filter system: Theoretically, the air filter element should be cleaned or replaced every 3,000 kilometers. The air filter not only affects fuel consumption but also power and engine durability. Consider replacing it with a new one. 2. Scooter clutch failure: For scooters, the clutch is also a wear-prone component, and counterfeit scooters may experience faster damage. The scooter's drive relies entirely on the clutch, and clutch damage first causes low-speed stuttering, affecting power and subsequently increasing fuel consumption. Replace the clutch if necessary. 3. Carburetor aging: Due to the generally poor quality of carburetors in cheap scooters and factors like fuel quality, carburetor aging and damage are accelerated. Damaged carburetors directly lead to incomplete fuel combustion, increasing fuel consumption. 4. Cylinder kit issues: The reciprocating motion of piston rings, pistons, and cylinders inevitably causes wear. Inferior cylinder kits wear out faster. Severe wear in the cylinder kit may lead to oil and fuel mixing, increasing fuel loss. Monitor cylinder kit wear and replace it promptly if severe wear is detected. 5. Other reasons: Such as tire pressure issues, spark plug problems, etc.
1
5
Share

Can a Spark Plug Still Be Used After Getting Wet?

It is not recommended to continue using a spark plug that has gotten wet; simply replace the spark plug. Criteria for determining spark plug damage: Damaged spark plugs may exhibit the following symptoms: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption. Steps for replacing a spark plug: Open the hood, lift the plastic engine cover, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris such as leaves or dust, and ensure everything is cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage ignition wires in the firing order, and then secure the cover back in place.
5
4
Share

How many meters is the straight-line driving in Subject 3?

There is no fixed distance for the straight-line driving in Subject 3, but it is approximately 100 meters. Tips for maintaining straight-line driving: 1. Choose a fixed reference point: Many people think that seeing the road clearly in front of them helps in driving straight, but in fact, looking further ahead can be more helpful. You can find a fixed point ahead on the road, which could be an object or a certain marker, and follow it with your gaze while driving. 2. Maintain an appropriate speed: If the speed is too slow, the vehicle is more likely to deviate. Since the speed requirements for straight-line driving vary by location, you should drive at a steady speed according to the local requirements, avoiding significant acceleration or deceleration. 3. Steering wheel adjustments: Remember to make only "minor adjustments." The straight-line driving section is highly sensitive to steering wheel movements, and excessive turning will be detected by the system. If you notice the vehicle starting to deviate from the straight line, make a slight adjustment in the opposite direction, turning the wheel about 2mm. 4. Keep your hands and feet relaxed: Being overly tense can lead to unconsciously gripping the steering wheel too tightly and inaccurately controlling the accelerator pedal. This can cause the speed to fluctuate and make you forget to adjust the steering wheel. Keep your arms relaxed for flexible control of the steering wheel, and your legs natural to maintain a steady speed.
1
0
Share

Why doesn't the rear disc brake of the motorcycle work properly?

The rear disc brake may not work properly due to excessive wear of the brake pads, aging or damage of the brake pump, issues like sticking or insufficient pressure causing oil leakage, or the brake oil level being too low. Additionally, check if the passages in the pump are blocked. It might be necessary to replace the brake pump. Here is some additional information: 1. Disc brake: A disc brake consists of a brake disc connected to the wheel and a brake caliper at the edge of the disc. When braking, high-pressure brake oil pushes the brake pads to clamp the disc, creating the braking effect. 2. Function of disc brakes: Disc brakes have flat brake shoes on both sides of the brake disc. When the hydraulic pressure from the master cylinder is delivered to the wheel cylinder, it causes the brake shoes to clamp the disc, achieving the braking effect.
4
0
Share

How many years of driving experience are required for ride-hailing?

Registering as a ride-hailing driver requires more than three years of driving experience. Here are additional details: 1. The driving experience requirements for ride-hailing drivers are: Premium cars: more than 3 years of driving experience. Standard cars: more than 1 year of driving experience. 2. Other requirements: males aged 21-60, females aged 21-50, in good health with no factors affecting safe driving; no records of traffic accidents, dangerous driving, drunk or drug-impaired driving, or violent crimes, and these proofs must be submitted during registration; holding a C2 or higher driver's license, with more than 3 years of driving experience, and possessing a good awareness of safe driving.
13
3
Share

How to Cancel the Speed Alarm When Exceeding 30 km/h in the Hongqi H5?

Simply turn off the alarm system in the vehicle settings. Here are detailed introductions about the Hongqi H5: 1. Overview: The Hongqi H5 is a new model under the Hongqi brand. The H5 largely retains the design of the Hongqi B-Concept concept car, featuring an inverted trapezoidal front grille connected to the headlights, with vertical chrome trim embedded inside. It was officially launched in Beijing in 2015. 2. Others: Equipped with a 1.8T engine, rated power of 131kw, torque of 250Nm, matched with a 6AT transmission. It features an independent floating central control screen, a three-spoke multifunction steering wheel, and an electronic handbrake. Fuel consumption is 6.2-6.4L. Displacement options are 1.5T or 1.8T.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.