How to activate the cruise control on the Bin Yue?
4 Answers
The method to activate the cruise control on the Bin Yue is: Press the power button to turn on the cruise control system, at which point the cruise control indicator light on the dashboard will illuminate; 2. Accelerate to the desired speed, then press the SET button. You can then release the accelerator pedal, and the speed will be maintained at the current level. If you need to make fine adjustments to the speed, you can use the RES and SET buttons. The Bin Yue is a Class A SUV under Geely Auto, with dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, and a wheelbase of 2600mm. The vehicle is equipped with a three-spoke flat-bottom steering wheel and a large floating central control screen, along with practical features such as hill descent control, parking assist, electronic parking brake, and auto hold.
I often use the cruise control when driving my Bin Yue to and from work, and the method is very handy: first, make sure the speed is above 40 kilometers per hour and find a straight road section like a highway. Then, on the right side of the steering wheel, there is usually a button marked 'CRUISE' or with a cruise icon—press it to activate the system, and an indicator light will illuminate on the dashboard. Next, press the 'SET' button to lock the current speed, and the car will automatically maintain a constant speed without needing to control the accelerator. If the car ahead slows down, press 'CANCEL' or lightly tap the brake to cancel; to resume the speed, press the 'RES' button. This feature is perfect for long trips as it reduces leg fatigue, allowing you to focus more on steering, and incidentally saves some fuel because the engine runs more smoothly. However, don’t rely on it to fall asleep or doze off—safety first, always stay alert to changes in road conditions to ensure driving safety.
As an experienced driver who has driven various models, let me teach you how to safely use the Binyue cruise control: The vehicle speed must reach at least 30-40 km/h to activate it. The specific operation is to press the cruise icon button on the steering wheel, then press the SET button to lock the current speed. When using it, always keep your eyes on the road ahead and hands on the wheel to control direction, as the system does not recognize obstacles. It's best to turn it off during curves or in foggy weather. After activating cruise control, use the acceleration and deceleration buttons on the steering wheel to adjust speed. Fuel efficiency is secondary; the key is to develop good habits, such as confirming the brakes are normal before each use and regularly checking the tires. Avoid using it in complex road conditions to prevent delayed reactions in emergencies. Remember, in any urgent situation, immediately press the brake to cancel it—safe driving is always the top priority.
From a technical perspective, the cruise control in the Bin Yue is managed by the electronic control unit to regulate the throttle. Activating it is straightforward: drive to the desired speed (e.g., above 50 km/h), press the CRUISE button on the steering wheel to activate the system, then press SET to lock it in. The system uses sensors to adjust engine output to maintain a constant speed—a rather clever design. However, this is merely an assistive feature, not autonomous driving; users must remain vigilant throughout to ensure safety. I appreciate how it simplifies driving, especially on straight highways where it enhances efficiency and optimizes fuel consumption.
